Sunjoy L-GF002PCA User manual

Production Number: XXXXXXXX Made in China 1/ 2
ASSEMBLY INSTRUCTIONS
ITEM# L-GF002PCA
NOTE:
For safety and stability purposes, this item is intended for use with the ground stakes, well secured into the ground.
CARE INSTRUCTIONS:
Clean gently with environmentally-friendly soap solution and water using a sponge. Do not use abrasive materials,
wire brushes, chemicals, cleansers or bleach. Do not use a pressure washer. Rinse well. Allow to air dry.
If there are nicks, chips and scratches, go to your local hardware store or home center and obtain a closest match
touch-up paint suitable for outdoor metal use. Follow instructions that come with the paint.
Important: For technical assistance on assembly or replacement parts, please call Sunjoy Industries at 1(866) 578-6569
from 8:00 AM EST to 8:00 PM PST. You may email to [email protected] or visit www.sunjoyonline.com
to place your order or fax your parts replacement order form (which is included in the packaging) together with your
purchase receipt to 1 [phone] for assistance.

Production Number: XXXXXXXX Made in China 2/ 2
Parts List
Part# Description QTY Image
A Crane with head up 1
B Crane with head down 1
Parts List
Part# Description QTY Image
AA Stake
50x135xD6mm
4
ASSEMBLY STEPS:
1. Choose a level location for set up. It is recommended
that you choose a location that can accommodate ground
stakes.
2. Place Crane in desired location.
3. Insert 2 ground stakes (included) through the holes on
feet (1 at the front & 1 at the back) to secure Crane (A).
Repeat this step for the other crane.
4. If necessary, use a rubber mallet to completely secure
the ground stakes into the ground.
5. Depending upon soil conditions, adjusting stakes from
time-to-time may be required.