Sunjoy L-GZ043PST-3 User manual

ASSEMBLY INSTRUCTION
ITEM # L-GZ043PST-3 SKU # 210017113
10 FT. x12 FT. GAZEBO
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use & care
directions before attempting to assemble.

IMPORTANT:
1. When installing and assembling your gazebo, it is recommended that 2 or more adults
are involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of getting
struck by lightening.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury,
possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible
damage will occur to the structure.
5. Never barbecue under this gazebo or use lanterns that contain naked flames.
6. This package contains small items and plastic bags that should be kept away from
children.
7 Ensure that all connectors & poles are firmly secured in position fully. It is important to
do so before use so as to avoid collapsing or damage to the item, which could result in
injury.
8. WARNING: Keep all flame and heat sources away from this tent fabric. This tent is
made with fabric that meets CPAI –84 specifications for flame resistance. It is not fire
proof. The fabric will burn if left in continuous contact with any flame source. The
application of any foreign substance to the tent fabric may render the flame-resistant
properties ineffective.
PARTS LIST:
Tools required: hammer, ladder, screw driver (not included)
AA 8pcs
M6X32 Bolt
(TBZ0010630HQ)
BB 8pcs
M6 Big Flat Washer
(TBZ10806HQ)
CC 4pcs
DD 4pcs
M8 Nut with cap
(TBZ20308HQ)
M8 Washer
(TBZ10808HQ)
GG 16pcs
￠6 x180 Peg
(TBZ10706180HQ)
WW 1pc
M6/M8 Wrench
Hardware Pack

NO.
Parts
Qty.
Images
A
Panel 1
4
B
Panel 2
4
C
Pole 1
2
D
Pole 2
2
E
Pole 3
2
F
Pole 4
2
G
Top pole
( pre-assembled with
plastic parts )
4
H
Connector
2
H1
Connector
2
I
Hanger
4
J
Center connector
1
K
Long pole
2
L
Canopy
1
M
Top canopy
1
N
Mosquito netting
1
TT
Plastic tie
44
Parts List

ASSEMBLY STEPS:
STEP 1:
Use boltsAA, washers BB to fix panels A and B, place them on right position as fig.1
Insert pole D into pole C, joint pole E and F, as fig.2, fig.3.
Connect poles C D E F with panelsA and B to set up the frame, as fig.4;
STEP 2:
Insert pole G into connectors H H1, as fig.6;
Fix connectors H H1 with panels A and B, as fig.4;
Insert another end of pole G into center connector J, as fig. 5;
Then connect pole K with pole F and center connector J to finish canopy frame assembly,
as fig.5 fig.7;
STEP 3:
Assemble canopy L on frame, do not tighten, fully assemble top canopy M on pole G, and tighten
canopy L, then use nuts CC washers DD to fix hangers I on connectors H, H1, as fig.8;
Use plastic tie TT to fix mosquito netting N on poles C D E F;
Use pegs GG to fix gazebo on ground, as fig.9;
Now your gazebo is ready for use.

USE & CARE:
1. This Gazebo is not a permanent structure and should be disassembled & stored away
after use.
2. Do not repack your gazebo until completely dry.
3. This Gazebo must be assembled by two adults or more.
4. This Gazebo must not be left erect in windy conditions.
WARNINGS:
1. Assembly Instructions must be followed.
2. Pegs and ropes supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.
CUSTOMER SERVICE:
If you are within the return policy that most stores have, you do have the option of
returning this item back to the store which you bought it from for an exchange of the same
item, or a refund of the purchase.
If you are within or beyond the return policy that most stores have, and need tech.
assistance or replacement parts, please call Sunjoy Industries at 1(866) 578-6569 from
8:30 am to 5:30 pm eastern standard time or e-mail to [e-mail] or fax
your parts replacement order form together with the purchase receipt to 1 [phone]
for assistance.
Thank you for choosing Sunjoy Industries