Sunjoy L-GG049PST-B User manual

Assembly Instruction
Small Grill Gazebo
L-GG049PST-B

IMPORTANT:
1. When installing and assembling your gazebo, it is recommended that two or more adults are involved.
2. Do not use the gazebo during an electrical storm, as there is a remote chance of getting struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as possible damage will occur to the
structure.
5. Do not use lanterns that contain open flames.
6. This package contains small items and plastic bags that should be kept away from children.
7. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so before use so
as to avoid collapsing or damage to the item, which could result in injury.
8. KEEP ALL FLAME AWAY FROM THIS SHELTER FABRIC. The fabric may burn if it is exposed to
prolonged contact with a flame source. The application of any foreign substance to the fabric may render the
flame-resistant properties ineffective.
USE & CARE:
1. This gazebo is not a permanent structure and should be disassembled & stored away after use.
2. Do not repack your gazebo until completely dry.
3. This gazebo must not be left erect in windy conditions.
4. Steel components for garden accessories and furniture are treated with rust inhibiting paint that protects
them from rust. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is recommended that care be
taken when assembling and handling the product in order to prevent the paint from being scratched. Surface
rust can be removed easily using a very light application of common cooking oil. If surface oxidation (rusting)
occurs and no measures are taken to correct it, the oxidation may start dripping onto the deck or patio, which
may cause damaging stains that may be difficult to remove.
WARNINGS:
1. Assembly Instructions must be followed.
2. Pegs supplied must be used to hold this gazebo in place when upright.
3. Warranty does not cover damage due to extreme weather conditions.

Post 1 A 1
Post 2 B 1
Post 3 C 1
Post 4 D 1
Stake piece E 2
Screen F 2
Middle Beam G 1
Top Beam H 2
Short beam J 1
Bar K 2
Hook Beam L 1
Canopy M 1
Bolt N 12
Parts List

Fig.1: Insert the Stake Piece
(E) into the bottom of the
Post (A, B, C, D).
Fig.2: Attached the Screen
(F) to the Post (A, B, C, D)
with the Bolt (N).
Fig.3: Attached the Top Beam
(H) to the Post (A, B, C, D) with
Bolt (N).

Fig.4: Insert the Bar (K) into
the Top Beam (H)
Fig.5: Insert the Middle Beam
(G) into the Bar (K).
Fig.6: Attached the Hook Beam
(L) to the Post (A, C) with the
Bolt (N).
Fig.7: Attached the Short beam (J) to the Post (B, D) with the Bolt
(N).

EE Ф6*180 Ground Stake 4 PCS
Fig.8:Extend the Canopy (M) onto four
corners of the top frame, then secure
the Velcro of the Canopy (M) to the
Bars.
Hardware Pack
Fig.9:Secure the whole gazebo to
the lawn with the Ground Stake (EE).