Sunny Health & Fitness SF-RW5515 User manual

MAGNETIC ROWING MACHINE
SF-RW5515
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: [email protected] or 1- 877 - 90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe
and effective use can only be achieved if the equipment is assembled, maintained,and used properly.
It is your responsibility to ensure that all users of the equipment are informed of all warnings and
precautions.
1. Before starting any exercise program, you should consult your physician to determine if you have
any medical or physical conditions that could put your health and safety at risk or prevent you from
using the equipment properly. Your physician’s advice is essential if you are taking medication that
affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do
experience any of these conditions, you should consult your physician before continuing with your
exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the
equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or
checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has been
rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 250 pounds (110KG).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool and dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
EXPLODED DIAGRAM

3
PARTS LIST
No.
Description
Spec.
Qty
No.
Description
Spec.
Qty
1
Front Stabilizer
1
42
Adjusting U Seat
30*10*1.5
4
2
Washer
d8*Φ16*1.5
6
43
Nut
M6*H6*S10
8
3
Screw
M8*55*20*S6
2
44
Main Frame
1
4L/R
End Cap
2
45
Trunk Wire 1
1
5
Nut
M8*H7.5*S13
3
46
Washer
d12*Φ24*2
1
6
Screw
ST4.2*25*Φ10.5
4
47
Knob
M12
1
7
Handlebar
1
48
Bolt
M12*Φ12.5*160*S19
4
8
Foam Grip
Φ26*3*215
2
49L/R
Pedal L/R
2
9
End Cap
Φ28*15
2
50
Pedal Strap
2
10
Left Belt Cover
1
51
Magnet
Φ15*7
1
11
Screw
ST4.2*19*Φ8
11
52
Spring Washer
d8
8
12
Screw
ST4.2*16*Φ8
7
53
Wheel
Φ40*92
3
13
Computer
1
54
Casing Pipe for
Idler Wheel
Φ13*Φ8*78
3
14
Tension Control
Knob
1
55
Bearing
608Z
6
15
Washer
D5
1
56
Rubber Pad
1
16
Screw
M5
1
57
Right Belt Cover
1
17
Nut
M10*1*H8*S15
4
58
Bolt
Φ10*95*M6*25
1
18
Nut
M10*1*H5*S17
4
59
Screw
M6*16*S5
1
19
Cover for Mesh
Belt Wheel
Φ149*14
1
60
Pull Pin
Φ8*100*105
1
20
Outer PC Board
1
61
Sensor Wire
1
21
Volute Spring
1
62
Sliding Rail
1
22
Axle for Mesh
Belt Wheel
1
63
Screw
M6*16*Φ12
4
23
Bearing
6000-ZZ
4
64
Washer
d6*Φ12*1
5
24
PC Board
1
65
Limit Mat
Φ33*Φ8*13
4
25
Bolt
M5*45*Φ4.8
1
66
Limit Axle
Φ12*80*M6
2
26
Mesh Belt Wheel
Φ145
1
67
Grommet
Φ16*15*Φ5
1
27
Belt Wheel
Φ104
1
68
End Cap
J80*40*18
1
28
Bolt
M6*55*S10
3
69
Rear Support
1
29
Cir Clip
d10
3
70
End Cap
2
30
Bolt
M6*55*15*S10
1
71
Seat
DDPU986
1
31
Wave Washer
Φ13.5*Φ10.2*0.4
1
72
Screw
M8*20*S6
4
32
Spacer
Φ10*Φ6.1*40
1
73
Bolt
M8*125*15*S14
3
33
Mesh Belt Pulley
Φ45*35
1
74
U Shape
Bracket
2
34
Screw
M8*16*S6
4
75
Left Seat
Supporting
Board
1
35
Washer
d8*Φ20*1.5
10
76
Right Seat
Supporting
Board
1
36
Handlebar Seat
1
77
Spacer
d8*Φ15*4
6
37
Screw
M5*10*Φ10
2
78
Spanner
S17-19
1
38
Mesh Belt
t1.5*22*2270
1
79
Allen Wrench
S5
1
39
Belt
6PJ250
1
80
Allen Wrench
S6
1
40
Inertial Wheel
Φ176
1
81
Spanner
S13-14-15
1
41
Adjusting Screw
M6*40*Φ10*2.5
4

4
#81
HARDWARE PACKAGE
.
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓The model number (found on cover of manual)
✓The product name (found on cover of manual)
✓The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front of
the manual)
Please contact us at [email protected] or 1- 877 - 90SUNNY (877-907-8669).
#2 d8*Φ16*1.5 6PCS
#3 M8*55*20*S6 2PCS
#46 d12*Φ24*2 1PC
#47 M12 1PC
#48 M12*Φ12.5*160*S19 4PCS
#52 d8 4PCS
#58 Φ10*95*M6*25 1PC
#59 M6*16*S5 1PC
#60 Φ8*100*105 1PC
#63 M6*16*Φ12 1PC
PC11PC
#65 Φ33*Φ8*13 1PC
#66 Φ12*80*M6 1PC
#72 M8*20*S6 4PCS
#78
#79
#80
#64 d6*Φ12*1 1PC
S5
S6
S13
S14
S15
S17
S19

5
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-907-
8669).
STEP 1:
Attach Front Stabilizer (No. 1) to Main Frame
(No. 44) using 2 Screws (No. 3) and 2 Washers
(No. 2). Tighten and secure with Allen Wrench
(No. 80).
STEP 2:
Attach the 2 Bolts (No. 48) into the bottom hole in
position B of Main Frame (No. 44) with Spanner
(No. 78).
Insert the 2 Bolts (No. 48) into the upper hole in
position A of the Main Frame (No. 44) through the
Pedals (No. 49L/R). Tighten with Spanner (No.
78).
NOTE: The Pedals (No. 49L/R) should rest on
Bolts (No. 48) that are in position B.

6
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY (877-907-
8669).
STEP 3:
Insert the Seat (No. 71)onto Sliding Rail (No.
62).
Insert the Limit Axle (No. 66) into the hole on
the back of the Sliding Rail (No. 62).
Attach the Limit Mat (No. 65) onto the Limit
Axle (No. 66) using 1 Screw (No. 63) and 1
Washer (No. 64), then tighten with Spanner
(No. 81).
STEP 4:
Attach Sliding Rail (No. 62) onto Rear Support
(No. 69) using 4 Screws (No. 72), 4 Spring
Washers (No. 52), and 4 Washers (No. 2).
Tighten and secure with Allen Wrench (No.
80).
STEP 5:
Connect Trunk Wire 1 (No. 45) with Sensor
Wire (No. 61).
Attach the Sliding Rail (No. 62) to Main Frame
(No. 44) using 1 Bolt (No. 58) and 1 Screw
(No. 59). Tighten and secure with Allen
Wrench (No. 79) and Allen Wrench (No. 80).
Next, attach the top of the Sliding Rail (No. 62)
to the Main Frame (No. 44) using 1 Knob (No.
47) and 1Washer (No. 46), then insert Pull Pin
(No. 60).
The assembly is complete!

7
ADJUSTMENTS & USAGE GUIDE
CAUTION! Moving parts, such as the seat, can cut and crush. Keep hands clear of the sliding rail
during use!
PEDAL STRAP ADJUSTMENT
The pedal strap is adjustable and can be personalized to fit
the user’s foot size.
MOVING THE ROWER
To move the rower, lift up the Rear Support (No. 69) until
the transportation wheels on the front stabilizer touch the
ground. With the wheels on the ground, you can transport
the rower to the desired location with ease.
ADJUSTING THE BALANCE AND RESISTANCE
Adjust the End Caps (No. 70) on the Rear Support (No. 69)
of the rower if the rower is unbalanced during use.
Rotate the Tension Control Knob (No. 14) clockwise to
increase the level of resistance. Rotate the tension control
counter-clockwise to decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and
Level 8 being the highest.

8
STORAGE GUIDE
When not in use, you can
save space by folding the
Sliding Rail (No. 62).
1. Disassemble Knob
(No. 47) and Washer (No.
46) and pull out the Pull
Pin (No. 60). Fold the
sliding rail to vertical angle
(Figure A).
SAFETY NOTE: the seat
will glide down when
folding the sliding rail.
2. Reinsert Pull Pin (No.
60) into the hole on the
main frame, then tighten
Knob (No. 47) and
Washer (No. 46) to
Sliding Rail (No. 62).
(Figure B)
Figure A
Figure B
CAUTION!
Use caution when you
vertically fold the
Sliding Rail (No. 62)
as your head may
touch the Rear
Support (No. 69).
CAUTION!
The Seat (No. 71) will glide
down when folding the
Sliding Rail (No. 62)!

9
EXERCISE COMPUTER
FUNCTION KEYS:
MODE: To select your specification mode and/or turn on display console.
SET: To set a value of Time or Calories (when not in Scan mode).
RESET: Press to reset Time or Calories.
FUNCTIONS
AUTO ON/OFF & AUTO START/STOP: The power will turn off automatically once there’s no signal
for 4 minutes. The meter will reactivate once the machine is put into motion or when a meter key is
pressed.
SCAN: Press MODE button until SCAN appears. The display will rotate through the four functions in
the following order: TIME, COUNT, TOTAL COUNT, and CALORIES. Each display will be held for 6
seconds.
TIME: Counts the total time elapsed during your current workout.
COUNT: Counts the number of rowing strokes from your current workout.
TOTAL COUNT: Counts the total amount of strokes from the first use.
CAL: Counts the total calories burned from current workout.
BATTERY: This monitor uses two AAA batteries. If the display appears incorrectlyor becomes difficult
to read, please install new batteries. Always change both batteries at the same time. Do not mix
battery types and do not mix old and new batteries. Dispose of batteries according to your state and
regional guidelines.
SPECIFICATIONS
Version 5.2
FUNCTIONS
SCAN
Every 6 seconds
TIME
0:00~99:59 (Minute: Second)
COUNT
0~9999 Count
CALORIES
0.0~9999 Kcal
TOTAL COUNT
0~9999 Count
BATTERY TYPE
(2) Two AAA or UM-4
OPERATING TEMPERATURE
0°C ~ 40°C
STORAGE TEMPERATURE
-10°C ~ 60°C