Sunnydaze Decor CRO-126 User manual

128330210
LADDER BOOKSHELF
CRO-126
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022 Page 1 / 7
CHOKING HAZARD — This item contains small parts
that can be swallowed. Keep children and pets away
during assembly.
WARNING
  
AProtective Foot 4
BM4x50mm Flat Screw 2
C40mm Grub Screw 1
DConnector Cap Nut 2
EM4x14mm Wood Screw 2
FM4x30mm Flat Screw 16
GWall Anchor 2
HWasher 4
IAnchor Strap 2
JHex Key 1
KM4x12mm Bolt 8
LSide Panel Bracket 4
  
1Upper Side Panel 2
2Shelf 4
3Lower Side Panel 2
(not included)
Phillips Screwdriver
Rubber Mallet
Power Drill,
6mm Drill Bit
Ensure all parts are
accounted for before
disposing of packaging.

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture;
only use a slightly moistened cloth.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
128330210 08/2022 Page 2 / 7
WEIGHT CAPACITY
Please pay attention to the maximum weight supported by each shelf.
Always ensure weight is evenly distributed.
To ensure the quality of the product, take care not to exceed the weight capacities.
For maximum stability, anchor this unit to a wall using the included hardware.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property
damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment,


128330210 08/2022 Page 3 / 7
Install wood dowels by gently
tapping them into the designated
hole using a rubber mallet.
Use a screwdriver to tighten the
cam screw until the shoulder is

tighten or under-tighten.
Align the cam lock opening (arrow)
with the pre-drilled hole on the side
of the panel. Use a screwdriver to
adjust alignment as needed.
STEP 1
ASSEMBLY
Wood Dowel Cam Screw Cam Lock



1x2 3x2
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.
x4
A
x4
L
x8
KM4x12mm

128330210 08/2022 Page 4 / 7



STEP 2


2x1
STEP 3

x2
D
x1
C
x4
FM4x30mm
IMPORTANT:
Ensure the connector cap nuts
are evenly fastened onto the
ends of the grub screw.
Do not over-tighten hardware,
as space is needed for shelf
installation.

128330210 08/2022 Page 5 / 7




STEP 5
STEP 4
2x3

x2
EM4x14mm
x2
H
x2
I

x12
FM4x30mm

128330210 08/2022 Page 6 / 7


STEP 6

x2
BM4x50mm
x2
H
IMPORTANT: 

Carefully measure the location for the pilot holes before drilling and installing the unit.
WARNING: Check for pipes and electrical wiring before drilling.
• Place the shelf against the wall, hold the wall mounting straps against the wall and mark the position for drilling the
pilot holes.
• Using a power drill with a 6mm bit, drill a pilot hole to the depth of the wall anchor. For walls with softer material, a
5mm bit is recommended.
• Insert each wall anchor into the hole until the opening is flush with the wall. Ensure the wall anchors are well fitted
and are tight in the pilot hole.
• Secure the strap to the wall using the 50mm screw and washer.
x2
G

128330210 08/2022 Page 7 / 7
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• For residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the shelves, as doing so may cause them to sag.
• Do not place the unit in direct sunlight.
• Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.