Sunnydaze Decor ORNAMENT TREE User manual

M.DS003 Page 1 / 3
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
A1 Inner Base Leg** 1
A2 Base Leg 1
B1 Center Pole 1
B2 Center Pole with Star 1
CM6x35mm Bolt and M6x10mm Nut
**remove from part A1 1
D32" Branch 

E27" Branch 

F22" Branch 

G19" Branch 

H16" Branch 

ORNAMENT TREE
HMI-665
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
04/2022
(not included)
Adjustable Wrench
Pliers

Page 2 / 3M.DS003
STEP 1
A1: 1
A2: 1
C: 1
STEP 2
STEP 3 STEP 4
B1: 1
D: 4 
B2: 1
E: 2 
F: 2 
G: 2 
H: 2 
Remove Bolt and Nut (C) from Inner Leg Base (A1).
Place Inner Base Leg (A1) through the inside of Base Leg
(A2). Align the mounting holes on the bottom and loosely
secure using Bolt and Nut (C).
Ensuring the tapered end is upward, place Center Pole
(B1) into the base.
󰀩
󰀩
Cross 16" Branch Set (H), slide toward the top of Center
Pole with Star (B2) and loosely tighten the wing screws.
     󰀩     
Sets (G, F, E) onto the pole.
Place the assembled top section onto the bottom.
Adjust branch placement and spacing to suit your

Ensuring the center poles are straight and all feet are

04/2022
ASSEMBLY
TIP: Install branch sets
with the inner-most
scrolls facing downward,
as shown.
IMPORTANT:
Install branch sets in size
order, with the smallest set
on top.
TIP: Ensure the center
poles are straight, the
base legs are evenly
distributed, and touching
the ground before you

H
G
F
E
16"
19"
22"
27"

Page 3 / 3M.DS003 04/2022
SAFETY STATEMENTS & WARNINGS

• Recommended for indoor use only.
• Do not hang heavy objects from the hooks. Do not exceed the weight capacity as noted above.
• Ensure weight is evenly distributed to prevent the tree from tipping over.
• This is not a toy. Always supervise children and pets.
WARNING:


Care & Maintenance

and high moisture may cause the paint to chip or peel. The product warranty does not cover damages caused
by exposure to outdoor elements.

Ensure weight is evenly distributed on the branches. Maximum Weight Capacity per Branch (when evenly
distributed):
16", 19", 22" Branch: 1.9 lbs (0.9 kg)
27" Branch: 1.5 lbs (0.7 kg)
32" Branch: 0.8 lbs (0.4 kg)
LOCATION
󰀩
CLEANING
Clean metal decor frequently to prevent dust, dirt and debris from building up.
1. Remove loose dust, dirt, cobwebs, and debris with a clean feather duster or a very soft-bristled brush, like
a paintbrush.
2. Use a soft, dry cloth to gently wipe away dirt and debris from larger surfaces. For stuck-on dirt, dampen the
cloth slightly and gently wipe soiled surfaces. Never use cleaners, abrasive materials, or high-pressure

Troubleshooting

• 
• Loosen the nut and bolt at the base and slightly adjust the alignment of the legs.
• 

• Ensure the base legs are installed straight.
• Ensure weight is distributed evenly. For example, the tree could be leaning if branches are not distributed evenly and/
or if ornament weight is not evenly distributed.
󰀩
• A wrench or pliers may be required to tighten some wing screws. Tools not included.