Sunnydaze Decor MERANTI User manual

Page 1 / 388005
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerser[email protected], or via our contact us page at https://tiny.cc/SunnydazeContact
MERANTI WOOD JACK AND JILL
ATTACHED CHAIRS AND TABLE
FRN-879
Read this manual carefully before using this product. Save this manual for future reference.

03/2020
HELPFUL HINTS
• Sunnydaze Decor advises reading this manual thoroughly and
assembling the item soon after purchase.
• Do not fully tighten hardware until all components are assembled. If
the hardware is tightened too soon, mounting holes may not align,
and parts may not easily fit together.
  
ARight Arm 1
BRight Inner Arm 1
CLeft Inner Arm 1
DLeft Arm 1
ESeat 2
FBackrest 2
GTabletop 2
HJCBC M6x40 Bolt 16
IJCBC M6x60 Bolt 8
JBarrel Nut 8
KHex Key 1
LBarrel Nut Driver 1
WARNING
CHOKING HAZARD — This
item contains small parts that can
be swallowed by children. Keep
children away during assembly.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
2-PERSON
ASSEMBLY
RECOMMENDED

ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten any bolts all until all components have been assembled.
Page 2 / 303/2020
STEP 1
B: 1
C: 1
G: 2
H: 8
Do not fully tighten any bolts until after Step 5 is complete.
STEP 2
D: 1
E: 1
F: 1
H: 2
I: 2
J: 4
STEP 3
H: 2
I: 2
STEP 4
A: 1
E: 1
F: 1
H: 2
I: 2
J: 4
• Fasten Left Inner Arm (C) to 2x Tabletop (G) by hand-
tightening 4x M6x40 Bolt (H).
• Fasten Right Inner Arm (B) to the opposite side of the
tabletops by hand-tightening 4x M6x40 Bolt (H).
• Insert 4x Barrel Nut (J) into Seat (E). Use the Barrel Nut
Driver to align the barrel nut with hole on the side of the seat.
• Align the pegs on Seat (E) with the holes on the inside
of Left Arm (D) and secure them by hand-tightening 2x
M6x60 Bolt (I); ensure the bolt threads into the barrel nut.
• Fasten Backrest (F) to Left Arm (D) by hand-tightening
2x M6x40 Bolt (H).
• Align the pegs on Seat (E) with the holes on Left Inner
Arm (C).
• Secure the assembled left-side chair to the table by
hand-tightening 2x M6x40 Bolt (H) and 2x M6x60 Bolt
(I), as shown.
• Insert 4x Barrel Nut (J) into Seat (E). Use the Barrel Nut
Driver to align the barrel nut with hole on the side of the seat.
• Align the pegs on Seat (E) with the holes on the inside
of Right Arm (A) and secure them by hand-tightening 2x
M6x60 Bolt (I); ensure the bolt threads into the barrel nut.
• Fasten Backrest (F) to Right Arm (A) by hand-tightening
2x M6x40 Bolt (H).
88005
Do not fully tighten any bolts until after Step 5 is complete.
Do not fully tighten any bolts until after Step 5 is complete.Do not fully tighten any bolts until after Step 5 is complete.

Page 3 / 3
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chairs. Do not sit
or stand on the table.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the harmful e󰀨ects
of sunlight, inclement weather, dust build-up, and collecting debris.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
MAINTENANCE:If left untreated, the wood may weather. A suitable wood stain or oil may need to be
applied yearly.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.

03/2020
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


88005
STEP 5
H: 2
I: 2
• Align the pegs on Seat (E) with the holes on Right Inner Arm (B).
• Secure the assembled right-side chair to the table by hand-tightening
2x M6x40 Bolt (H) and 2x M6x60 Bolt (I), as shown.
Tighten all bolts after this step is complete.