Sunnydaze Decor ARNOLD BWD-894 User manual

Page 1 / 3BW21-08T
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
04/2022
ARNOLD
COUNTER-HEIGHT DINING TABLE
BWD-894
Carefully read all assembly and information in this manual before using this product. Save this manual for future reference.

CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase. Check that
all parts are accounted for and familiarize yourself with the assembly before beginning.
NOTE: Over time and with use, the bolts may become loose.
Save the included tool for tightening loosened hardware.
  
ATable Top 1
BLeg 4
CCenter Support 1
DSide Support 2
1JCBC M6x60mm Bolt 12
2JCBC M6x40mm Bolt 2
3Split Washer 8
4Flat Washer 8
58x30mm Wood Dowel 6
6Hex Key 1

Page 2 / 3
1. Place Table Top (A) upside-down on a soft, clean surface. Align Leg (B) with the corner of the table top. Loosely
fasten Leg (B) to the table top using two sets of Flat Washer (4), Split Washer (3), and JCBC M6x60mm Bolt (1)
as shown. Repeat until all legs have been securely fastened.
2. Insert 8x30mm Wood Dowels (5) into the top holes of Center Support (C), as shown. Insert remaining Wood
Dowels (5) into the top holes of Side Supports (D).
3. Align the dowels in the center support with the mounting holes in the middle of the side supports. Then, secure
the side supports to the center supports using JCBC M6x40mm Bolts (2).
4. Align the side supports with the table legs and secure using JCBC M6x60mm Bolts (1) as shown.
5. Fully tighten all hardware.
Tip: Always fully insert the hex key inside the designated notch of the bolt.
If the hex key is not entirely inside the notch, the hex key could slip out,
causing damage to the bolt head. In addition, repeated hex key slipping
will cause the notch to become rounded, making it di󰀩cult or impossible
to tighten the bolt.
BW21-08T 04/2022
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware
until all components have been loosely assembled.
IMPORTANT:
Do not install
wood dowels into
mounting holes with
threaded inserts.

SAFETY STATEMENTS & WARNINGS

Page 3 / 3
• For indoor use only.
• This product is for residential use only; institutional or commercial use will void this warranty.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Do not sit, stand or climb on any part of this unit.
• Do not exceed the weight capacity of this item.
• Do not place liquids or hot items directly on the unit.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Avoid long-term exposure to sunlight.
• Avoid placing near heating or cooling vents as forced air is be very drying and could damage the wood.
• Use a padded barrier to protect the furniture surface when using writing utensils.
BW21-08T 04/2022
Care & Maintenance
Clean the furniture using a dry, soft
cloth or clean feather duster.
SOAP
Remove stains with a slightly damp
cloth and mild soap. Dry with a soft
cloth to prevent water damage.
Do not clean with harsh cleansers or
polish.
Do not put hot items or any liquids
directly on the furniture surface.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.