Sunnydaze Decor AGR-331 User manual

CL211 01/2023
COFFEE TABLE WITH DRAWER
AGR-331
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

2-PERSON
ASSEMBLY
RECOMMENDED
Page 1 / 8
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO

CL211 01/2023
INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
microber cloth to prevent dust
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.
Assemble on a soft, at, clean, and
dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 2 / 8

CL211 01/2023
  
01 Tabletop 1
02 Side Panel (L/R) 2
03 Leg 4
04 Back Panel 1
05 Front Panel 1
06 Drawer Rail 2
07 Drawer Side (L/R) 2
08 Drawer Face 1
09 Drawer Back 1
10 Drawer Base 1
  
AWood Dowel 28
BM4.5x28mm Pan Screw 20
CM3.5x30mm Flat Screw 8
DTack 16
EHandle Set 1
FConnector 10
GM4.5x25mm Pan Screw 10
HM3.5x14mm Flat Screw 6
JDrawer Slide 2
KM4x8mm Bolt 2
COMPONENTS
(not included)
Phillips Screwdriver
Regular Screwdriver
Rubber Mallet CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
Page 3 / 8
2-PERSON
ASSEMBLY
RECOMMENDED
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

CL211 01/2023
IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.
ASSEMBLY
Carefully review all steps and fully understand assembly before beginning.
STEP 1
02: 2
04: 1
05: 1
06: 2
A: 28
F: 10
TIP: Install connectors by gently tapping
them into the designated hole using a
rubber mallet.
Page 4 / 8
Locate and lay out two Side Panels (02), Back Panel (04), Front Panel (05), and two Drawer Rails (06).
Install components as shown in the diagrams, and noted below:
Side Panel (02), install six Wood Dowels (A) and two Connectors (F). Repeat with the second side panel.
Back Panel (04), install four Wood Dowels (A) and three Connectors (F).
Front Panel (05), install four Wood Dowels (A) and three Connectors (F).
Drawer Rail (06), install four Wood Dowels (A). Repeat with the second drawer rail.
Set components aside, label if necessary.

CL211 01/2023
STEP 2
03: 4
B: 8
STEP 3
B: 4
IMPORTANT:
Ensure Drawer Rails (06) are installed in the correct
direction, as shown in this diagram.
Assistance is recommended for this step.
Page 5 / 8
IMPORTANT:
Note the direction of the pre-drilled holes on the legs.
Ensure the holes for mounting the front/back panel are
upward as indicated in the diagram.
Identify the two indents on the long, thin
side of Drawer Rails (06), the indent with the
longer distance between it and the end of the
rail must be installed toward Back Panel (04).
Align the back side of two Drawer Rails (06)
with the Back Panel (04) as shown. Secure
the drawer rails using two M4.5x28mm Pan
Screws (B).
Align Front Panel (05) with the drawer rails
and secure using two M4.5x28mm Pan
Screws (B).
Align two Legs (03) with Side Panel (02) and
secure using four M4.5x28mm Pan Screws
(B).
Repeat this step to assemble the remaining
side panel and legs.
TIPS:
Before beginning, familiarize yourself with all the parts
used in this step. Carefully read written instructions, and
refer to the diagram to ensure you understand assembly.
The 'Top' of the front and back panel is the side with the
connectors installed.
The 'Bottom' of the drawer rail has angled pre-drilled
holes.

CL211 01/2023
Back
Front
Back
Front
STEP 4
H: 6
J: 2
STEP 5
B: 8
Page 6 / 8
IMPORTANT:
The arrow on the drawer slide must
face the front of the unit.
Ensure the drawer slide remains
centered on the drawer rail; if the
slides are not centered, the drawer
will be crooked.
Push the front of one Drawer Slide (J) backward. Align the 3rd round hole on the
front of the drawer slide with the front indent on the drawer rail and secure using
one M3.5x14mm Flat Screw (H).
Push the drawer slide forward to expose the holes on the back of the drawer slide, the backside indent will align with
the 7th round hole from the back of the slide. Ensuring the slide is centered on the rail, secure the 7th hole, then the
3rd hole using M3.5x14mm Flat Screws (H).
Repeat this step to secure the remaining drawer slide on the opposite drawer rail.
Locate the assembled side/leg
panels from Step 2.
Align the mounting holes on
the legs with the front and back
panels, as shown. Secure each
side using four M4.5x28mm Pan
Screws (B).
IMPORTANT:
Ensure the legs are tight against the
panels before installing the screws.

CL211 01/2023
STEP 6
01: 1
G: 10
STEP 7
07: 2
08: 1
09: 1
10: 1
C: 8
E: 1
Page 7 / 8
Place Top (01) on a at, clean surface. Align the assembled components with the top and secure using ten M4.5x25mm
Pan Screws (G).
Ensuring the inside grooves align, secure two Drawer Sides (07) to Drawer Face (08) using four M3.5x30mm Flat
Screws (C).
Slide Drawer Bottom (10) into the grooves, as shown.
Secure Drawer Back (09) to the drawer sides using four M3.5x30mm Flat Screws (C).
Ensuring the handle and handle plate remain straight, install one Handle Set (E) to the drawer face.

CL211 01/2023
STEP 8
D: 16
K: 2
Extend the drawer slides out
the front of the cabinet.
Align the rst small hole on
the drawer slides with the pre-
drilled hole on the front of the
drawer sides.
From the inside of the drawer,
secure the drawer to the slide
using one M4x8mm Bolt (K)
on each side, as shown.
NOTE: The drawer sides have
a second pre-drilled hole toward
the back of the drawer, this hole
is a result of the manufacturing
process and is not intended for
securing the drawer to the slide.
Evenly install sixteen Tacks
(D), as shown.

SAFETY STATEMENTS & WARNINGS
• Residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the drawers as doing so may cause damage.
• Do not place the unit in direct sunlight.
• Avoid placing unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

Page 8 / 8