Sunnydaze Decor MERANTI FRN-511 User manual

MERANTI WOOD GARDEN SHELF
FRN-511

Page 1 / 3
HELPFUL HINTS
• Sunnydaze Decor advises reading this manual thoroughly
and assembling the item soon after purchase.
• Do not fully tighten hardware until all components are
assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily fit together.
  
ATop Ledge 1
BLeg Support 2
CBack Leg 2
DFront Leg 2
ETop Shelf 1
FMiddle Shelf 1
GBottom Shelf 1
HJCBC M6x60 Bolt 14
IBarrel Nut 14
JBarrel Nut Driver 1
KHex Key 1
WARNING
CHOKING HAZARD — This item contains small parts that
can be swallowed. Keep children away during assembly.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
89708
2-PERSON
ASSEMBLY
RECOMMENDED
12/2020


Read carefully and understand assembly before beginning.
Do not fully tighten bolts until all components have been loosely assembled.
Page 2 / 3
STEP 1
B: 2
C: 2
D: 2
STEP 2
A: 1
E: 1
F: 1
G: 1
I: 14
• Insert the pegs on Leg Support (B) into Back Leg (C)
and Front Leg (D).
• Secure Top Ledge (A) to the second
assembled leg panel by hand-
tightening one M6x60 Bolt (H),
ensuring the bolt threads into the
barrel nut.
• Secure each shelf (E, F, G) by hand-
tightening M6x60 Bolts (H), ensuring
the bolts thread into the barrel nuts.
89708
• Insert 2x Barrel Nut (I) into Top Ledge (A).
• Insert 4x Barrel Nut (I) into each shelf (E, F, G).
• Use the Barrel Nut Driver to align the opening of the
barrel nut with the holes on the sides of each piece.
STEP 3
H: 7
12/2020
NOTE: Check to conrm the barrel nuts
are properly aligned inside both sides of Top
Ledge (A), as it is not possible to adjust the
alignment after the top shelf is afxed to the
leg panels.

Page 3 / 3
Care & Maintenance
For residential use only. Only use on a at, level surface.
Periodically check assembly points and tighten ttings as necessary.
PROTECT: Ensure there is a barrier, such as saucers or water trays, between planters and the wood. Runo󰀨 from over-
watering could stain the wood.
Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces with a soft,
dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
: Protect this item from inclement weather, especially ice and snow. Store in a dry, indoor
location. Covering the unit while in storage will help prevent dust buildup.
:This item was treated with teak oil at the factory. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) yearly, or when the wood looks particularly dry. Clean the unit
and bring into a dry, warm, indoor location. Allow the unit to thoroughly dry before applying oil; drying may take several
days. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully apply oil as directed by the wood
oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
89708 12/2020

SAFETY STATEMENTS & WARNINGS
• Do not overload the shelves.
• Do not sit, stand, or climb on the shelf.
• Inspect hardware often and tighten loose hardware.
• Do not put hot items on or near furniture.
• Keep furniture a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not allow children to climb on the unit as the unit to tip or break which could lead to serious injury.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
Tighten all bolts after this step is complete.
STEP 4
H: 7
WARNING:


• Align the second assembled leg
panel to the top ledge and shelves.
• Secure components by hand-
tightening M6x60 Bolts (H), ensuring
the bolts thread into the barrel nuts.