Sunrise Medical Sedeo Pro Omni 2 Reference guide

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 1
Omni 2 –Salsa Hotseat
Retro Fitting Help Guide

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 2
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE
Parts Required:
Electronics
•Omni 2 Kit –20011242 (includes Input Section, Display Screen, 250cm connecting
cable)
backpack, Mounting kit and R-Net bus. cable
•20009167
Omni 2 Flex Mount –Inc. adapter plate
•20009173

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 3
Parts Required:
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 4
Step 1
•Remove Omni 1 or retro fit the Omni flex mount to the armrest. All parts
included in the kit.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 5
Step 2
•Remove any cable tidy and disconnect R-Net Bus. Cable from the Omni 1 if
removing.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 6
Step 3
•Unscrew Omni 1 from the mounting bracket to remove.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 7
Step 4
•Fix the Omni 2 adapter plate to the Omni 2 Display Module with 2 small bolts.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 8
Step 5
•Fix the Omni 2 with adapter plate to the Omni mounting bracket with 2 bolts.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 9
Step 6
•Take the 2 Omni 2 backpack mounting plates that fit together in this orientation.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 10
Step 7
•Fix the two brackets together using 2 counter sunk bolts, nuts and washers. You
will need a 5mm Allen key and 10mm spanner.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 11
Step 8
•The two brackets should look like this once fitted together correctly.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 12
Step 9
•Open the Omni 2 backpack and drill holes in the orientation shown below.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 13
Step 10
•Turn the Omni 2 backpack over and line up the mounting plate so that the holes
line up.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 14
Step 11
•Use a 8mm spanner and 5mm Allen key to fix the mounting plate to the
backpack.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 15
Step 12
•Position the 4 clamping brackets around the widest part of the backrest
tensioner bar and fit the 4 long bolts through the holes in the brackets.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 16
Step 13
•Secure the brackets in place by using two of the hand wheels on the top two
bolts. Use a 5mm Allen key but don’t over tighten at this stage.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 17
Step 14
•Position the backpack and mounting plate so that the top two holes line up with
the bottom bolts on the mounting brackets and use the 2 remaining hand wheels
to secure. Use a 5mm Allen key.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 18
Step 15
•Open the backpack and remove the Velcro pad.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 19
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE
Step 16
•Take the Omni 2 Input Module and fix the Velcro pad to the back of the module.

CONFIDENTIAL: For internal use only.CONFIDENTIAL: For internal use only. 20
Step 17
•Fix the Input Module to the Velcro pad inside the backpack. Ensure you leave
enough space for the R-Net bus. cable.
OMNI 2 –SALSA HOTSEAT
RETRO FITTING HELP GUIDE