Suntec Wellness Klimatronic CoolBreeze 4000 SVM User manual

CoolBreeze 4000 SVM
OPERATING INSTRUCTIONS

PLEASE READ COMPLETELY BEFORE OPERATING
IMPORTANT SAFEGUARDS
1. Use fan only for purposes described in the instruction manual.
2. To protect against electrical shock do not immerse unit, plug, or cord in water or spray with liquids.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
4. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
5. Do not operate in the presence of explosive and/or flammable fumes.
6. Do not place fan or any parts neat an open flame, cooking or other heating appliances.
7. Do not operate any appliance with a damaged cord, plug, after the appliance malfunctions, or has been dropped/damaged in any manner.
8. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
9. Do not let the cord hang over the edge of a table, counter, or come in contact with hot surfaces.
10. Do not operate without fan. grills properly in place.
Note: If you experience a problem, please return the fan to the place of the original purchase or see your warranty. Do not attempt to open the motor
housing yourself. Doing so may void your warranty and cause damage to the fan or personal injury.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
PRODUCTINTRODUCTION
OPERATING INSTRUCTIONS
Head Assembly:
STEP1:Unscrew the 4 lock screw on the face of the fan housing, handle the rear grill to the motor housing by matching its 4 screw hole to the 4
screw hole on the front motor housing, then screw the lock screw to lock the rear grill and the front motor housing.
STEP2:insert the motor shaft into the fan blade by matching the motor shaft spindle to the D-shaped cut-out on fan blade, then screw the lock screw.
STEP3:Center the front grill. Allganing the logo, so it is horizontal and parallel to the floor, place onto the rear grill, and snap in place. Secure by
tightening the grill button screw at the bottom of the rear grill.
Pole Assembly:
Unscrew the screw in locking shaft at the bottom of fan housing. insert the upper extension pole to the locking shaft with the right hole position.
Base/PoleAssembly
Unscrew the screw at the bottom of the lower extension pole, and insert the pole through the base, then handtighten the base screw to securely
fasten the lower extension pole to the base.

MAINTENANCE
1. Always unplug the fan before cleaning or disassembling.
3. Be sure to use a soft cloth moistened with a mild soap solution.
4. Do not use any of the following as a cleaner: gasoline, thinner etc.
SPECIFIC ATIONS
Rated input Voltage: AC 230V
Rated input Frequency:50Hz
Rated Power: 80W
NOTE CONCERNING PROTECTION OF ENVIRONMENT
This product must not be disposed of via normal household waste after its service life, but must be taken to a collection station for the
recycling of electrical and electronic devices. The symbol on the product, the operating instructions or the packaging indicate such
disposal procedures. The materials are recycable in accordance with their respective symbols. By means of re-use, material
recycling or any other form of recycling old appliances you are making an important contribution to the protection of our environment.
Please ask your local council where your nearest disposal station is located.
© 2011 KLIMATRONIC
®
CoolBreeze
SUNTEC WELLNESS GMBH / HOLZSTRASSE 2 / 40 221 DÜSSELDORF / DEUTSCHLAND