Suntec Wellness KLIMATRONIC CoolBreeze 2500 TV User manual

CoolBreeze 2500 TV
OPERATING INSTRUCTIONS
PLEASE READ COMPLETELY BEFORE OPERATING
Fan Parts Identification
CAUTION
1. Do not plug the power cord into the wall outlet until the fan has been
completely assembled.
2. Use power source according to the electric specifications in the
rating label at the back of switch box.
HOW TO ASSEMBLE
The only tool required for the assembly is a screw driver.
MOUNTING OF THE FAN
Identification of the fan parts
1. Motor Housing
2. Rear Guard
3. Locking Nut
4. Blade
5. Blade Cap
6. Front Guard
7. Screw
Mounting the Rear Guard.
Mount the Rear Guard on to
the Motor Housing and secure it
with the Locking Nut.
Mounting the Blade.
Insert the Blade onto the
Motor shaft and tighten the
Blade with the Blade Cap.
Mounting the Front Guard
Hold the front guard to make sure
that the Trade Mark is level and
that the front guard are centered
over the rear guard. Then push all
the safety clips firmly into place.
CAUTION
Never operate the fan with a cracked or damaged blade.
1. Front guard
2. Blade
3. Blade knob
4. Blade screw
5. Rear guard
6. Motor housing
7. Oscillating control bar

HOW TO USE
1. Speed control
The fan speed is controlled by the buttons on the base
A: to turn on the fan, simply press the button marked 1-2 to choose the speed,
to turn it off, press the switch marked “0”
B. to turn on the fan, simply press the button marked 1-2-3 to choose the speed, to turn it off, press the
switch marked “0”
2. Oscillation
Push down the oscillation knob and the fan will oscillate.
Pull up the knob, the fan will not oscillate.
3. Tilting adjustment
Always switch the fan off before making a tilt adjustment.
The air flow can be adjusted upward or downward by
simply moving the fan guard up or down.
TECHNICAL DATA
Voltage: 230V~ 50Hz Max Power: 25 W Dimensions: 25,5 x 17.5 x 32,5 cm
MAINTANCE AND STORAGE:
1. Use in a dry place, free of excessive humidity.
2. Keep the fan clean; wipe away dust with a clean cloth.
3. Do not use sweater, detergents, abrasive cleaning liquids or chemical agents (Alcohol, gasoline etc.) to
clean the unit.
4. Before putting the fan in storage, clean thoroughly and cover with plastic bag and store in a dry place
5. When re-assembly the fan, make sure to following the instructions.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
NOTE CONCERNING PROTECTION OF ENVIRONMENT
This product must not be disposed of via normal household waste after its service life,but must
be taken to a collection station for the recycling of electrical and electronic devices. The
symbol on the product, the operating instructions or the packaging indicate such disposal
procedures. The materials are recycable in accordance with their respective symbols. By
means of re-use, material recycling or any other form of recycling old appliances you are
making an important contribution to the protection of our environment. Please ask your local
council where your nearest disposal station is located.
© 2012 KLIMATRONIC
®
CoolBreeze
SUNTEC WELLNESS GMBH / HOLZSTRASSE 2 / 40 221 DÜSSELDORF / DEUTSCHLAND