Super Circuits MDVR-14 User manual

MDVR-14
SOLID STATE MINI DVR
User Guide
1

2
Contents
1. SAFETY PRECAUTIONS..........................................................................................................3
2. FEATURES................................................................................................................................4
3. PACKING LIST...........................................................................................................................4
4. MDVR DESCRIPTION.............................................................................................................. 5
5. BASIC CONFIGURATION.........................................................................................................7
6. DISPLAY....................................................................................................................................8
7. OPERATION.............................................................................................................................9
8. MAIN MENU...........................................................................................................................10
8.1 DATE/ TIME.......................................................................................................................12
8.2 Motion Detection ...............................................................................................................13
8.2 Schedule Record...............................................................................................................11
8.3 Manual Record...................................................................................................................12
8.4 Playback...........................................................................................................................13
9. SD CARD ..............................................................................................................................14
10. FACTORY DEFAULT............................................................................................................14
11. KEY LOCK............................................................................................................................14
12. SPECIFICATION...................................................................................................................15

1. SAFETY PRECAUTIONS
Read the Safety Precaution Guide through carefully before operating the product, to prevent unsafe use of this product.
WARNING: The triangle symbols above are intended to alert the user to the presence of un-insulated
dangerous voltage.
CAUTION: This symbol is intended to alert the user to presence of important operating and maintenance
(Servicing) instructions in the literature accompanying the appliance.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact your local city office ,
your household waste disposal service or the shop where you purchased the product.
Do not Plug and unplug the power cord, it may result product malfunction. Do not install the product
in an environment where the humidity is high. Do not drop the product or subject the unit to physical
shocks. Never place the product in direct sun light can cause damage. Do not spill liquid on the
product. If the unit gets wet, wipe it dry immediately. Do not install the product in extreme temperature
conditions. Operating temperatures are between 5 degrees C (41 degrees F) ~ 45 degrees C.(113 degrees
F). Provide ventilation when operating under high temperatures.
3

2. FEATURES
• DVR supports NTSC or PAL video, and auto detects video loss.
• DVR comes with MPEG4-SP video and Audio Codec G.726. Supports 1 channel video, 1 channel audio recording and
playback .
• Uses SD card with FAT16/ 32 file system and ASF file format.
• You can view video using popular PC media players.
• Record time for 1 GB SD card is about 5 hours when DVR is set at Standard Quality, NTSC: 30 fps @ 352 x 240 and
PAL: 25 fps @ 352 x 280.
• Motion detection, schedule recording mode with independent video size, quality, and frame rate set up.
• Adjust motion sensitivity to control different types of motion triggers.
• Disable controls with key lock function.
• Use a 110AC/ DC power adaptor for indoor or nickel metal hydride (NiMH), alkaline batteries for remote applications.
3. PACKING LIST
Check to make sure all of the items shown below are included in your Recorder Kit. If something is missing, contact
your dealer as soon as possible.
Mini DVR Recorder Audio/ Video Cable X 2
Power Adaptor
Input: AC 100~240V
Output: DC 5V/ 1A
Manual
Quick Guide
4

4. MDVR14 DESCRIPTION
4.1 Front View
1. Power LED: Power Indicator
2. Play LED: Play Indicator
3. Menu/ Lock LED: Menu/ Key Lock indicator
4. Rec LED: During recording, record indicator will flash
slowly. On playback recording is disabled and the
record indicator will flash quickly.
Warning: LED’s 2, 3, 4, will flash quickly when recording
is disabled, causes can be SD card is not
inserted, full, damaged, or setup to read-only.
Press Enter button to reset warning.
5. Stop/ Exit Button: Stop Record or Play/ Exit Menu
6. Rec Button: Manual Record Button
7. & 8. Up Button/ Down Button: Moves cursor Up/
Down for menu selection.
9. & 10. - Left button/ + Right Button:
In Playback - Press to Fast Forward or Fast Rewind.
In Pause - Press - L & +Rbuttons to Step Playback.
In Menu - Press to Increase/ Decrease Setup values.
11. Enter Button: Use to enter Sub-Menu.
Use to reset warning.
Use to Key Lock/ Unlock: During monitoring or playback - Simultaneously pressing Enter first and then
the Menu button to switch Key Lock ON or OFF.
12. Display Button: Display status Line ON or OFF.
13. Play Button: Press to Playback.
Pause Button: During playback - Press to Pause, press again to
play.
14. Menu Button: Press to enter Menu Setup.
5

4.2 Side View
(15) AV IN: Audio/ Video Input: 3.5 mm jack for audio/ video line in.
(17) POWER: DC/ Battery Power Switch
(18) DC 5V IN: 5V/ 1A Power Input
(19) SD Card Slot
(20) Battery Compartment Cover
(16) AV Out: Audio/ Video Output 3.5 mm jack for audio/ video line out.
6

5. BASIC CONFIGURATION
1. Power: Use the power adaptor supplied, or a nickel metal hydride (NiMH), alkaline batteries.
2. Connect the camera to AVI input, MDVR will auto detect NTSC/ PAL video.
3. Switch to DC when using the supplied power adaptor or switch to BATT when using battery.
Use (256MB or above) SD Memory Card.
Remove SD card when the power is off or when in the main menu display. Removing the SD card under any
other circumstance will corrupt stored video or data.
7

6.2.1 Record status
1. MQ Symbol is your Record Quality indicator.
a. H - High b. M - Med c. L - Low
2. Icon indicates audio is ON.
Audio is OFF.
3. 2022/02/05 06:00:18 is the Date and Time and and should be reset as soon as possible. See setting date and time in
this manual.
4. Record Resolution, set resolution see
setting resolution in this manual.
5 Manual Record: Press (Rec) button, to
enter manual recording or record on
demand. For more information, see
Manual Recording in In this manual.
6 Motion Detection Record: Icon represents
you are recording only when images are in
motion. See Motion Recording in this
manual.
7. Schedule Recording: MDVR is in
schedule mode will record only on set
dates and time. See Schedule
Recording in this manual.
8. Indicates recording is in progress.
6.0 DISPLAY
6.2.1 SD Card status
1. “ ” icon displayed in bottom right hand
corner on the status line, indicates that SD card
is operating normally.
2. This icon indicates SD card is not inserted
or is malfunctioning. Try re-formatting before
proceeding.
3. SD card is in self test.
4. SD disk is full and in overwrite. Old data is
being overwritten.
8

7.2 Power On
1. Switch power to DC when using the supplied power
adaptor or switch to BATT when using battery.
NOTE: MDVR will auto-detect external peripherals.
While booting up the REC LED will start
fl a shing indicating SD card test.
2. After powering on, the system will start displaying live
video. If the SD card is not installed you will get a
message telling you the “SD CARD IS NOT READY”
and Play, Menu, and Rec LED’s will start flashing.
NOTE: If the MDVR experiences power loss the system will automatically return to the previous settings.
7.0 OPERATION
7.1 HARDWARE SETUP
1. Insert SD card into MDVR14 SD slot while the unit is off.
2. Plug AV IN cable in MDVR14 AV IN and connect camera to
yellow AV IN cable connector. Connect AV OUT cable to
MDVR14 AV OUTPUT and connect yellow AV OUT cable
to monitor.
NOTE: When recording, record indicator will flash slowly.
NOTE: Do not remove the SD card
while booting, this will corrupt your
video recording.
9

8.0 MAIN MENU
8.1 DATE/ TIME SETUP
1. Press Menu button and you will see the MAIN MENU. Select
SET DATE/ TIME and press the ENTER button on MDVR14.
Set time and date by using + and - buttons to change date
values and Up/ Down buttons to scroll up and down. Press
Exit button to exit menu.
8.2 MOTION SETUP
1. Move cursor to SET MOTION DETECT and press the
ENTER button. Select SET MD AREA by pressing
ENTER button. Select MODE type by pressing Play/Pause
button.
MODE TYPES:
FUNCTION
DESCRIPTION
CELL EDIT
Single detection cell setup
(detection/ non-detection)
DEL BLOCK
Disable a block.
DEL ALL
Disable all cells.
ADD BLOCK
Enable a block.
ADD ALL
Enable all cells.
10

2. SELECT ALL mode will enable motion detection for entire viewing screen and is indicated by a red screen.
3. DEL ALL mode will disabel motion detection for entire viewing screen and is indicated by a blue screen.
4. CELL EDIT mode will custom enable or disable motion
detection areas. Use arrow keys to select cell for
enabling or disabling and press enter key to switch
between motion enable or disable.
5 DEL BLOCK mode will disable motion cells.
6. ADD BLOCK mode will enable motion cells.
7. Blue area indicates motion disabled area, red area
indicates motion enabled areas. Press EXIT button to
exit MD AREA.
8. Select SET MD SENSITIVITY, set the threshold for
motion detection. Moving the red bar towards the left
will set the sensitivity high and moving the red bar
towards the right will set the motion sensitivity to low,
9. Press the EXIT button twice to exit SET MD
SENSITIVITY
10. Select SCHEDULE RECORD from MAIN MENU and
switch motion to ON. Set the desired resolution
and FPS (frame per second). Leave motion
schedule OFF. Select MOTION RECORD and press
the ENTER button.
NOTE: Use CONTINUE RECORD to schedule your
recordings if motion recording is not a option at
times during the day.
11

NOTE: If all three recording options are used, Manual, Motion, and Schedule, the priority for recording is 1. Manual
2. Motion 3. Schedule recording.
11. Set RECORD to ON and SCHEDULE to 00:00 23:59 to
schedule motion recording 24 hours a day. You can
schedule your recording for a specific time during the day,
but for this example we will expect to monitor motion 24 -7
12. Set your desired VIDEO SIZE, record DURATION, FRAME
RATE, QUALITY and AUDIO ON if audio is needed. Press
the EXIT button twice to exit motion setup. Use + and -
buttons to change values.
8.3 MANUAL RECORD
13. Use MANUAL RECORD, when wanting to record on demand.
12

8.4 Playback
8.4.1 Continuous Playback
1. Press Play/ Pause button for normal playback. Playback will start with most recent file and continue to play
all files.
2. Press for normal playback speed.
3. Press for Fast Rewind and Fast Forward (Speed: x2/ x4/ x8/ x16/ x32).
4. Press Pause to during playback button to pause playback and press twice to return to playback.
5. Press left or right buttons during pause to step back or forward one frame at a time and press Play/ Pause
button to return to normal speed playback.
6. Press Display button to hide all Display status.
7. Press Stop button to stop playback and return to live status.
8.4.2 Search Playback
1. Press MENU button and select SEARCH AND PLAY. Select file to
play, press play or enter button to play.
2. Color bar indicates type of recording (Blue Manual record, Red Motion
record, White Schedule record).
3. Use up and down arrow buttons to control cursor for selection.
4. Use Stop button to stop playback and return to SEARCH AND PLAY.
8.4.3 PC Playback
1. SD card can be removed and directly played using a PC.
2. Open SD card files using Microsoft - Media Player or DivX-DivX Player.
Use lastest Media Player available. Go to www.divx.com to down load.
All files are located using DVMPG4 folder and are partitioned in 1MB
files.
3. Can copy PC files to SD card for DVR playback.
4. Use a card reader to view files, plug card reader into the computer
using the USB cable. Insert the SD card into the appropriate SD
slot and wait for Windows to identify and open your SD files.
NOTE: You can either play or record but, you cannot do both at the
same time.
13

9.0 SD CARD
1. Format SD card by inserting into MDVR and selecting SD
CARD OPTIONS from MAIN MENU. Select FORMAT and
press the enter button. Select YES by pressing the ENTER
button. FORMAT OK will display on the screen and you are
ready to record.
2. In the same menu, you can set the MDVR14 to overwrite
previous data to keep recording by selecting LOOP in CARD
FULL.
STOP option under CARD FULL will stop recording when SD
card is full.
NOTE: Do not remove the SD card while booting, this
will corrupt your video recording.
10. FACTORY DEFAULT
1. Use FACTORY DEFAULT to reset the MDVR when you have hardware issues or simply to default to factory settings.
Select FACTORY DEFAULT from MAIN MENU and press ENTER button. Press ENTER button again to confirm.
11. KEY LOCK
1. Simultaneously pressing “Enter” and “Menu” button will switch to Key Lock “ON/ OFF”. When Key Lock key is locked,
key lock indicator will flash slowly.
14

Video
System NTSC / PAL Video System and Video Loss Auto Detection
Codec MPEG4-SP ASF File Format
Record Frame
Rate
1, 2, … , Maximum fps selectable
Maximum:
NTSC: 30 fps@352x240/ 24 fps@704x240/ 12 fps@704x480
PAL: 25 fps@352x280/ 20 fps@704x280/ 10 fps@704x560
Record Quality Low / Medium / High
Record Time*
*it may change
for different video
content
(1 GB SD Card)
Frame Rate@ Resolution
Quality
30 fps@352x240
25 fps@352x280
24
fps@704x240
20 fps@704x280
12
fps@704x480
10 fps@704x560
Low 400
minutes
240
minutes 240 minutes
Medium 300
minutes
150
minutes 150 minutes
High 150
minutes 75 minutes 75 minutes
Recording Date/Time Overlay with Video Images in ASF File
Input 1 CH Composite Video Line In
Output 1 CH Composite Video Line Out
Audio
Sampling Rate 44.1 KHz
Codec G.726/ 32 kbps
Input 1 CH Audio Line In
Output 1 CH Audio Line Out
Storage Media SD Card (FAT16/ 32)
Recording Mode Manual / Schedule Motion Detection / Schedule Continue
Motion Detection Setting Multiple Blocks and adjustable sensitivity
Event Search Function Property and first image of selected file is displayed
Playback Function Play/Fast Forward/Fast Rewind/Pause/Step Forward/Step Backward
Playback Speed x1/ x2/ x4/ x8/ x16/ x32
Power Supply DC 5V± 10% 1A/ 2 x AA (Rechargeable Ni-MH/ Alkaline Battery)
Battery Lasting Time 2 x AA Ni-MH: 180 min/ 2 x AA Alkaline: 100 min
* It may change for different brand, charging, and temperature condition.
Weight 89 g (without Battery/ SD card)
Dimensions 65 mm (W) x 90 mm (H) x 29 mm (D)
Operating Environment 30%~80% RH, 5C~ 45C(41F~ 113F) C = Centigrade F = Fahrenheit
Storage Environment 30%~90% RH, 0C~ 50C(32F~ 122F)
12. SPECIFICATIONS
15