superbrightleds DS-CO4 User manual

RGB/RGBW, CCT, and Dimming Controller
Important: Read all instructions prior to installation. DS-CO4
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V2 09/23/2020
User Manual
5yr
Compatible Remotes
Pairing Remote(s)
Safety and Notes
Model DS-CO4
Operating Temperature -22°–131° F (-30°–55° C)
IP Rating IP67
• Product should be installed and serviced in accordance with applicable national,
state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power source and circuit
breakers are switched o󰀨 before performing any installation or wiring procedures.
• Each controller can be paired to up to ten (10) remotes.
• Controller will auto-transmit signals from remote to additional controllers within
98.4 ft (30 m).
• DS-RGBW - RGB/RGBW remote
• DS-CCT - Tunable White (CCT) remote
• DS-DM - Dimming remote
Controller Specications
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
REMOTE(S) MUST BE PAIRED AS PART OF THE INSTALLATION
PROCESS AND DO NOT COME PRE-PAIRED.
To pair a remote, press match button, then immediately press on/
o󰀨 button on the remote. Connected light(s) will ash three times to
indicate successful pairing. To unpair a remote, hold match button
for ve seconds, Connected light(s) will blink ve times to indicate
all remotes have been unpaired.
Dynamic RGB/RGBW Mode List
Mode Mode Description
01 RGB Jump
02 RGB smooth
03 6-color jump
04 6-color smooth
05 Yellow, Cyan, Magenta smooth
06 RGB fade in/out
07 Red fade in/out
08 Green fade in/out
09 Blue fade in/out
10 White fade in/out
Remote Controls
NW
B
WW
G
100% 50% BG
100% 50% 25%75%
R G B W
cycle through modes
changes mode speed hold to save current settings/
press to recall saved settings
hold to save current settings/
press to recall saved settings
hold to save current settings/
press to recall saved settings
dimming (+)
color selection CCT selection dimming level selection
dimming (+) dimming (+)
preset dimming levelspreset single channel settings preset CCT levels
preset dimming levels
dimming (-) dimming (-) dimming (-)
DS-RGBW DS-CCT DS-DM

RGB/RGBW, CCT, and Dimming Controller
Important: Read all instructions prior to installation. DS-CO4
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V2 09/23/2020
User Manual
5yr
DEOKSAN LIMITED
Dimming remote
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Brown1 R WW
LED Output
D
S-CO4 IP67
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
•
tc= 75
℃
Po w er I nput
B
row n ：V+
B
lu e ：V -
●DS-CO4 for single
color
Black
V+
Y/G
2
3G
B
CW
Blue
Gray
4
W
WW
CW
Power Supply
1
2–36 VDC
C
onstant Voltage
●DS-CO4 for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become
RGB type.
●DS-CO4 for dual color
Po w er I nput
Bro w n ：V+
Blu e ：V -
DS-C O4
RGBW/RG B/CCT/ Di mming
4CH LE D RF C ontroll er
Uin=12-36VD C
Iin=20.5A
Uout= 4 x ( 1 2 - 36) V D C
Iout= 4x5A
Pout= 4 x ( 6 0 - 180) W
Temp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
Black V+
Brown 1 RWW
Y/G 2 G CW
Blue 3 BWW
Gray 4WCW
Power Supply
12-36VDC
Constant Voltage
AC100-240V
CCT remote
CW
WW Dual col or L ED strip
CW
WW Dual color L ED strip
Po w er I nput
B
row n ：V+
B
lu e ：V -
D
S-CO4
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
B
lack V+
B
rown 1 RWW
Y
/G 2 G CW
B
lue 3 BWW
Gray 4WCW
RGBW LED str ip
W
RGB remote
Wiring Diagram
●DS-CO4 for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become
RGB type.
●DS-CO4 for dual color
Po
w er I nput
Br
o w n ：V+
Blu e ：V -
D
S-CO4
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
B
lack V+
B
rown 1 RWW
Y
/G 2 G CW
B
lue 3 BWW
Gray 4WCW
Power Supply
1
2–36 VDC
C
onstant Voltage
CCT remote
CW
WW
CW
WW Tunable White LED strip
Tunable White LED strip
Tunable White LED strip
Po w er I nput
Bro w n ：V+
Blu e ：V -
DS-C O4
RGBW/RG B/CCT/ Di mming
4CH LE D RF C ontroll er
Uin=12-36VD C
Iin=20.5A
Uout= 4 x ( 1 2 - 36) V D C
Iout= 4x5A
Pout= 4 x ( 6 0 - 180) W
Temp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
Black V+
Brown 1 RWW
Y/G 2 G CW
Blue 3 BWW
Gray 4WCW
RGBW LED str ip
W
Power Supply
12-36VDC
Constant Voltage
AC100-240V
RGB remote
Tunable White LED strip
Power Supply
1
2–36 VDC
C
onstant Voltage
DEOKSAN LIMITED
Dimming remote
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Brown1 R WW
LED Output
D
S-CO4 IP67
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
•
tc= 75
℃
Po w er I nput
B
row n ：V+
B
lu e ：V -
●DS-CO4 for single
color
Black
V+
Y/G
2
3G
B
CW
Blue
Gray
4
W
WW
CW
Power Supply
1
2–36 VDC
C
onstant Voltage
●DS-CO4 for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become
RGB type.
●DS-CO4 for dual color
Po w er I nput
Bro w n ：V+
Blu e ：V -
DS-C O4
RGBW/RG B/CCT/ Di mming
4CH LE D RF C ontroll er
Uin=12-36VD C
Iin=20.5A
Uout= 4 x ( 1 2 - 36) V D C
Iout= 4x5A
Pout= 4 x ( 6 0 - 180) W
Temp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
Black V+
Brown 1 RWW
Y/G 2 G CW
Blue 3 BWW
Gray 4WCW
Power Supply
12-36VDC
Constant Voltage
AC100-240V
CCT remote
CW
WW Dual col or L ED strip
CW
WW Dual color L ED strip
Po w er I nput
B
row n ：V+
B
lu e ：V -
D
S-CO4
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
Ii
n=20.5A
U
out= 4 x ( 1 2 - 36) V D C
Iou
t= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
B
lack V+
B
rown 1 RWW
Y
/G 2 G CW
B
lue 3 BWW
Gray 4WCW
RGBW LED str ip
W
RGB remote
Wiring Diagram
●DS-CO4 for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become
RGB type.
●DS-CO4 for dual color
Po
w er I nput
B
row n ：V+
Blu e
：
V -
D
S-CO4
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
•
tc= 75
℃
IP67
LED Output
B
lack V+
B
rown 1 RWW
Y
/G 2 G CW
B
lue 3 BWW
Gray 4WCW
Power Supply
1
2–36 VDC
C
onstant Voltage
CCT remote
CW
WW
CW
WW Tunable White LED strip
Tunable White LED strip
Tunable White LED strip
Po w er I nput
Bro w n ：V+
Blu e ：V -
DS-C O4
RGBW/RG B/CCT/ Di mming
4CH LE D RF C ontroll er
Uin=12-36VD C
Iin=20.5A
Uout= 4 x ( 1 2 - 36) V D C
Iout= 4x5A
Pout= 4 x ( 6 0 - 180) W
Temp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
Black V+
Brown 1 RWW
Y/G 2 G CW
Blue 3 BWW
Gray 4WCW
RGBW LED str ip
W
Power Supply
12-36VDC
Constant Voltage
AC100-240V
RGB remote
Tunable White LED strip
Power Supply
1
2–36 VDC
C
onstant Voltage
DEOKSAN LIMITED
Dimming remote
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Brown1 R WW
LED Output
D
S-CO4 IP67
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
•
tc= 75
℃
Po w er I nput
B
row n ：V+
B
lu e ：V -
●DS-CO4 for single
color
Black V+
Y/G 2
3G
B
C
W
Blue
Gray
4
W
WW
CW
Power Supply
1
2–36 VDC
C
onstant Voltage
●DS-CO4 for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become
RGB type.
●DS-CO4 for dual color
Po w er I nput
Bro w n ：V+
Blu e ：V -
DS-C O4
RGBW/RG B/CCT/ Di mming
4CH LE D RF C ontroll er
Uin=12-36VD C
Iin=20.5A
Uout= 4 x ( 1 2 - 36) V D C
Iout= 4x5A
Pout= 4 x ( 6 0 - 180) W
Temp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
Black V+
Brown 1 RWW
Y/G 2 G CW
Blue 3 BWW
Gray 4WCW
Power Supply
12-36VDC
Constant Voltage
AC100-240V
CCT remote
CW
WW Dual col or L ED strip
CW
WW Dual color L ED strip
Po w er I nput
B
row n ：V+
B
lu e ：V -
D
S-CO4
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
Ii
n=20.5A
U
out= 4 x ( 1 2 - 36) V D C
Iou
t= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
B
lack V+
B
rown 1 RWW
Y
/G 2 G CW
B
lue 3 BWW
Gray 4WCW
RGBW LED str ip
W
RGB remote
Wiring Diagram
●DS-CO4 for RGB/RGBW
Note: If connect with RGB LED strip, please long press match key for 15s, the controller will become
RGB type.
●DS-CO4 for dual color
Po
w er I nput
Br
o w n ：V+
Blu e ：V -
D
S-CO4
R
GBW/RG B/C CT /Dimming
4
CH L E D RF C ontroll er
Ui
n=12-36VD C
I
in=20.5A
U
out= 4 x ( 1 2 - 36) V D C
I
out= 4x5A
P
out= 4 x ( 6 0 - 180) W
T
emp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
B
lack V+
B
rown 1 RWW
Y
/G 2 G CW
B
lue 3 BWW
Gray 4WCW
Power Supply
1
2–36 VDC
C
onstant Voltage
CCT remote
CW
WW
CW
WW Tunable White LED strip
Tunable White LED strip
Tunable White LED strip
Po w er I nput
Bro w n ：V+
Blu e ：V -
DS-C O4
RGBW/RG B/CCT/ Di mming
4CH LE D RF C ontroll er
Uin=12-36VD C
Iin=20.5A
Uout= 4 x ( 1 2 - 36) V D C
Iout= 4x5A
Pout= 4 x ( 6 0 - 180) W
Temp Range: -30℃~+55℃
• tc= 75℃
IP67
LED Output
Black V+
Brown 1 RWW
Y/G 2 G CW
Blue 3 BWW
Gray 4WCW
RGBW LED str ip
W
Power Supply
12-36VDC
Constant Voltage
AC100-240V
RGB remote
Tunable White LED strip
Power Supply
1
2–36 VDC
C
onstant Voltage
Typical Wiring
RGB/RGBW
Tunable White
Single Color
Troubleshooting
Malfunctions Causes Troubleshooting
No light 1. No power
2. Incorrect or loose connection
1. Check power
2. Check the connection
Wrong color 1. Incorrect wiring 1. Check wiring
Uneven intensity
between front and rear,
with voltage drop
1. Output cable is too long
2. Wire diameter is too small
3. Overload beyond power supply capability
4. Overload beyond controller capacity
1. Reduce cable length
2. Change to higher gauge wire
3. Replace with a higher wattage power supply
4. Add power repeater.
Malfunction “no
response from remote”
1. The battery has no power.
2. Beyond controllable distance.
3. Controller and remote are not correctly paired.
1. Check/replace battery.
2. Reduce distance from remote to controller.
3. Re-pair the remote and controller.