suprema Xpass User manual

EN 102.00.XP V1.21

-2-
Safety Precautions
Product Components
Optional Accessories
Product Description
Product Dimension
Cables and Connectors
Power Connection
LAN Connection
RS485 Connection
Relay Connection
Digital Input Connection
Wiegand Input/Output
External Power Output
Installation of Wall-mount Bracket
Installation Reference
Specification
Electrical Specification
FCC Rules
Contents
3
5
6
7
10
11
14
16
18
20
23
25
26
27
28
31
32
33

-3-
The list below is to keep user’s safety and prevent any loss. Please read safety
precautions carefully before use.
Do not install the device in a
place subject to direct sun
light, humidity, dust or soot.
Do not place a magnet
near the product.
Do not place the device next
to heating equipments.
Be careful not to let liquids like
water, drinks or chemicals leak
inside the device.
Clean the device often to
remove dust on it.
When cleaning, do not splash
water on the device but wipe it
out with a smooth cloth or towel.
Safety Precautions
It may cause a damage or
a failure to the product.
It may cause a failure.

-4-
Do not drop the device.
Do not damage the device.
Do not disassemble, repair or
alter the device.
Do not let children touch the
device without supervision. Do not use the device for any other purpose than
specified.
Contact your nearest dealer in
case of a trouble or problem.
The warranty does net apply to any
product damage cause by an
arbitrary installation or repair.
Safety Precautions
The list above is to keep user’s safety and prevent any loss. Please read safety
precautions carefully before use.

-5-
Product Components
Xpass Bracket
Wall Mounting Screws
(2 ea) Knife Blocks (2 ea) Shrinkable Tubes Software CD
Extended Ethernet Cable
Basic Components
The components shown above may differ depending on the installation environment.
Diode
(1 EA)

-6-
Plastic standSecure I/O
Optional Accessories
Extended Bracket Adaptor

-7-
Product Description

-8-
LED status

-9-
Initialization of network setting
When you install the Xpass or forget the network setting’s value of Xpass in use, can initial the network
setting’s value (TCP/IP address, RS-485 setting) in the switch of Xpass’s back side as follows;

-10-
Product Dimension
< Extended Bracket >< Front View > < Bracket >< Side View >
(unit : mm)

-11-
Cables and Connectors No Pin Name Full Name Color
1485 GND 485 GND White (black string)
2WG GND Wiegand-GND Black
3485 TRXN 485 -Yellow (black string)
4WG D1 Wiegand-1 White
5485 TRXP 485 + Blue (white string)
6WG D0 Wiegand-0 Green
7TTL IN1 Input-1 Brown
8RLY NO Relay Open Gray (white string)
9TTL GND Input-GND Gray
10 RLY COM Relay Com Green (white string)
11 TTL IN0 Input-0 Purple
12 RLY NC Relay Close Orange (black string)
13 ENET TXP TX+ (LAN) Pink
14 PWR +VDC Power IN+ Red
15 ENET TXN TX-(LAN) Orange
16 PWR GND Power IN-Black (white string)
17 ENET RXP RX+ (LAN) Blue
18 PWR OUT Power OUT+ Light Blue
19 ENET RXN RX-(LAN) Yellow
20 PWR GND Power OUT-Black (white string)
21 VB1 VB1 Green (black string)
22 VB2 VB2 Brown (white string)
23 VB1 VB1 Green (black string)
24 VB2 VB2 Brown (white string)

-12-
Cable Pin Name Color
1Relay RLY NC Orange (black string)
2RLY COM Green (white string)
3RLY NO Gray (white string)
4Wiegand WG D0 Green
5WG D1 White
6WG GND Black
7Switch TTL IN0 Purple
8TTL IN1 Brown
9TTL GND Gray
10 485 485 TRXP Blue (white string)
11 485 TRXN Yellow (black string)
12 485 GND White (black string)
Cables and Connectors
Adaptor Connector Pin Name Color
Power
PWR GND Black (white string)
PWR OUT Light Blue
3PWR GND Black (white string)
1PWR +VDC Red
Cable Specification

-13-
Ethernet extension cable
LAN Connector Pin Name Color
1
LAN
ENET RXN Yellow
2ENET RXP Blue
3ENET TXN Orange
4ENET TXP Pink
5VB1 Green (black string)
6VB1 Green (black string)
7VB2 Brown (white string)
8VB2 Brown (white string)
LAN cable
Modular Jack (A) Connector (B) Pin Name Color
1 4 ENET TXP Blue
2 3 ENET TXN Orange
3 2 ENET RXP Black
6 1 ENET RXN Yellow
4 5 VB1 Red
5 6 VB1 Green
7 7 VB2 Brown
8 8 VB2 Gray

-14-
Power Connection 1
•12V ±10%, at least 1500mA.
•Comply with standard IEC/EN 60950-1.
•Use a separate power supply for Secure I/O, electric lock and Xpass respectively. If connecting and
using the power supply to these devices together, the devices may malfunction.
Recommended power supply
Pin Pin Name Color
14 PWR +VDC Red
16 PWR GND Black (white string)

-15-
Power Connection 2
Please use the distance of LAN cable within 100m in case of PoE power.
Recommended Power Supply
Please read below carefully before you install this product. This is essential steps for stable operation. Please
make sure to turn on the power of PSE only after connect all cables related to PoE
①Connect 8port Ethernet connect of
Xpass body to Ethernet expansion
cable in right direction
②Connect RJ45 modular from
Ethernet expansion cable to Ethernet
cable with CAT-5
③Connect the opposite side of
Ethernet cable to PoE HUB port
④Connect cable from PC to port from
PoE HUB and connect the opposite
side of cable to Ethernet port of PC
⑤Connect power of PoE HUB
PoE(Power over Ethernet)
: Use PSE(Power sourcing Equipment) that complies with IEEE802.3af standard only.

-16-
LAN Connection

-17-
LAN Connection (Direct connection with PC)

-18-
RS485 Connection for Host Communication
Pin Pin Name Color
1485 GND White (black string)
3485 TRXN Yellow (black string)
5485 TRXP Blue (white string)
1
5
3

-19-
RS485 Connection for Secure I/O
Max number of devices
Pin Pin Name Color
1485 GND White (black string)
3485 TRXN Yellow (black string)
5485 TRXP Blue (white string)
Maximum eight(8) devices (including Master) interworks in an RS485 loop.

-20-
Relay Connection –Fail safe lock Pin Pin Name Color
10 RLY COM Green (white string)
12 RLY NC Orange (black string)
•Take care of the direction of the diode.
•Make sure to install the diode near to the door lock.
•Make sure to use different power supplies for the Xpass and the door lock.
•Make sure to install the diode at both ends of the circuit as shown in the figure above in order to
protect the relay contact from the reverse current that occurs when the door lock works.