suprema Xpass S2 User manual

English
Version 2.2
Xpass S2
INSTALLATION GUIDE
www.supremainc.com
EN 101.00.XPS2 V2.20A

Contents
Safety Instructions ..........................................................................................3
Getting Started ................................................................................................4
Components ...................................................................................................................................................4
Features ..........................................................................................................................................................5
Part names and features ..................................................................................................................................................5
Cables and connectors ......................................................................................................................................................6
Installation ........................................................................................................7
Mounting the Bracket and Product ...........................................................................................................7
Installing the main bracket..............................................................................................................................................7
Installing the extension bracket......................................................................................................................................8
Connecting to Power....................................................................................................................................9
Connecting to a Network ............................................................................................................................9
TCP/IP ....................................................................................................................................................................................9
Connecting to an Door button/Door sensor ..........................................................................................10
Digital input connection (Door button, Door sensor) .............................................................................................10
Digital input connection (Alarm, Emergency switch)...............................................................................................10
Connecting to a Relay ...............................................................................................................................11
Fail Safe Lock ....................................................................................................................................................................11
Fail Secure Lock ................................................................................................................................................................11
Connecting to an Automatic door................................................................................................................................12
Connecting as a standalone......................................................................................................................12
Connecting to Secure I/O 2 ......................................................................................................................13
Connecting as a Wiegand device.............................................................................................................13
Resetting Network Settings.........................................................................................................................14
Restoring the Factory Defaults....................................................................................................................14
Product Specifications ................................................................................. 15
Product Specifications ................................................................................................................................15
Dimensions...................................................................................................................................................16
FCC Compliance Information...................................................................... 17
Appendix ........................................................................................................ 18
Disclaimers ...................................................................................................................................................18
Copyright Notice .........................................................................................................................................18

Safety Instructions
3
Safety Instructions
Please read the following instructions carefully before using the product. This information is important for ensuring the safety of the user
and for preventing damage to the user's property.
Warning
Violation of the instructions may cause serious injury or death.
Installation Instructions
Do not install the product in direct sunlight or in a location that is damp or dusty.
•This can cause a fire or electric shock.
Install the product in a dry place.
•Moisture can cause product damage or electric shock.
Do not install the product near any heat source such as electric heaters.
•This can cause a fire from overheat or electric shock.
Install the product in a place where there is no electromagnetic interference.
•This can cause product damage or electric shock.
Have qualified service professionals install or repair the product.
•Otherwise, it can cause a fire, electric shock, or injury.
•If the product is damaged due to a user's unauthorized installation or dismantling of the product, a service fee will be charged for repair.
Operating Instructions
Be careful not to spill any liquid such as water, drinks, or chemicals inside the product.
•This can cause fire, electric shock, or product damage.
Caution
Ignoring these instructions may result in minor injuries or damage to the product.
Installation Instructions
Protect the power cord from being walked on or pinched.
•This can cause product damage or injury.
Keep the product away from strong magnetic objects such as magnets, TVs, monitors (especially CRT monitors), or speakers.
•This can cause a product failure.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Use a separate power supply for Secure I/O 2, electric lock and Xpass S2 respectively.
•If connecting and using the power supply to these devices together, the devices may malfunction.
Operating Instructions
Do not drop the product or subject it to shock or impact during use.
•This can cause a product failure.
Do not press the buttons on the product with excessive force or with a sharp tool.
•This can cause a failure.
Clean the product with a soft, dry cloth. Do not use alcohol, benzene, or water.
•This can cause a product failure.

Getting Started
4
Getting Started
Components
The components may differ depending on where the product is installed.
Note
Xpass S2
Main bracket
Adapter
Mounting screws for bracket
(2 pcs)
PVC anchors
(2 pcs)
Heat shrink
tubes
Diode

Getting Started
5
Features
Part names and features
Name Feature
LED
•
Green: Authentication success
•Red: Authentication failure
•Pink: Processing
•Blue and sky-blue alternate flashing every 2 seconds: Normal operation
•Red and pink alternate flashing every 2 seconds: The device is locked.
•Blue and red alternate flashing every 2 seconds: The clock has been reset due to an empty internal battery.
(The clock needs to be reconfigured.)
•Blue and yellow alternate flashing every 2 seconds: An IP address has not been received when DHCP is set
to USE.
•Red flashes every 2 seconds on first use: Failure to reset. Contact the manufacturer.
•Yellow flashes briefly: Waiting for an input.
RF card touch area Reads RF card for entering and exiting.
Reset button
•Resets the network configurations when the device does not work properly. For details, refer to the
Resetting Network Setting.
•Deletes all data and certificate on the device and reset the settings. For details, refer to the Restoring the
Factory Defaults.
LED status indicator
for Network
Shows the status of the network connection.
LED status indicator
for Network
Reset button
RF card
touch area
LED

Getting Started
6
Cables and connectors
Pin Name Color
1 WG GND Black
2 TTL GND Gray
3 485 GND White (Black stripe)
4 WG D0 Green
5 WG D1 White
6 TTL IN0 Purple
7 TTL IN1 Brown
8 485 TRXP Blue (White stripe)
9 485 TRXN Yellow (Black stripe)
10 ENET TXN Red
11 ENET TXP Black
12 ENET RXN Yellow
13 ENET RXP Green
14 PWR GND Black (White stripe)
15 RLY NO Gray (White stripe)
16 RLY COM Green (White stripe)
17 RLY NC Orange (White stripe)
18 PWR +VDC Red

Installation
7
Installation
Mounting the Bracket and Product
Installing the main bracket
1With the mounting screws for the bracket, mount the bracket firmly onto the surface where Xpass S2 is to be installed.
If Xpass S2 should be installed onto a concrete wall, make a hole with a drill, and then insert a PVC anchor into the hole before screwing the mounting
screw.
2Attach Xpass S2 onto the mounted main bracket.
3Assemble Xpass S2 with the main bracket by screwing the mounting screws on the bottom of Xpass S2.
Note

Installation
8
Installing the extension bracket
1Assemble the extension bracket with the main bracket with the screws included with the extension bracket.
2Mount the assembled extension bracket onto the desired place with the mounting screws for the bracket.
3Attach Xpass S2 onto the mounted extension bracket.
4Assemble Xpass S2 with the extension bracket by screwing the mounting screws on the bottom of Xpass S2.

Installation
9
Connecting to Power
•Use a power adapter that has a DC 12 V (± 10%) specification of with the minimum current of 1,500 mA and has IEC/EN 60950-1 certification. If the
power adapter is shared by other devices, the power adapter should provide a current more than the sum of the power consumption from this
device (1,500 mA) and other devices.
•Use a separate power supply for Secure I/O 2, electric lock and Xpass S2 respectively. If connecting and using the power supply to these devices
together, the devices may malfunction.
Connecting to a Network
TCP/IP
LAN connection (connecting to a hub)
A normal CAT-5 cable can be used to connect to a hub.
LAN connection (connecting directly to a PC)
Xpass S2 can be connected directly to a PC by using a normal type CAT-5 cable because it supports an automatic MDI/MDIX function.
Xpass S2
PC
Xpass S2
Hub
PC
Note
18 - PWR +VDC Red
14 - PWR GND Black (White stripe)
UPS
(Optional)
DC power
Xpass S2
18
14

Installation
10
Connecting to an Door button/Door sensor
Digital input connection (Door button, Door sensor)
Digital input connection (Alarm, Emergency switch)
Xpass S2
Input 1
2
7
2
6
Input 0
2 - TTL GND Gray
6 - TTL IN0 Purple
7 - TTL IN1 Brown
2 - TTL GND Gray
6 - TTL IN0 Purple
7 - TTL IN1 Brown
Xpass S2
Door sensor
2
7
2
6
Door button