Surveon CAM4220 User manual

CAM4220
Megapixel IR Dome Indoor
Network Camera
User Manual
Release 1.2
April, 2010

Surveon CAM4220
AllRightsReserved©SurveonTechnology2010
CopyrightStatement
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written consent of
Surveon Technology Inc.
Disclaimer
Surveon Technology makes no representations or warranties with respect to
the contents hereof and specifically disclaim any implied warranties of
merchantability or fitness for any particular purpose. Furthermore, Surveon
Technology reserves the right to revise this publication and to make changes
from time to time in the content hereof without obligation to notify any
person of such revisions or changes. Product specifications are also subject to
change without notice.
Trademarks
Surveon and Surveon logo are trademarks of Surveon Technology Inc. Other
names prefixed with “NVR” are trademarks of Surveon Technology Inc. All
other names, brands, products or services are trademarks or registered
trademarks of their respective owners
1
Surveon Network Camera User Manual

Surveon CAM4220
Table of Contents
Copyright Statement.......................................................................... 1
Table of Contents ............................................................................. 2
Chapter1. Overview ........................................................................... 4
1.1. Network Camera Introduction .......................................................4
1.2. Network Camera Features............................................................4
1.3. Network Camera Specifications .....................................................5
1.4. Network Camera Hardware Installation ...........................................7
Chapter2. Connecting to the Camera ...................................................... 8
2.1. Connecting with a Web Browser ....................................................8
Changing your Password..................................................................8
Changing your Password..................................................................9
Installing Active X components........................................................ 10
2.2. Connecting with an RTSP Player ..................................................11
2.3. Connecting with a Mobile Device .................................................11
Chapter3. Web Interface.....................................................................12
3.1. Interface Layout......................................................................12
Control Descriptions .................................................................... 12
3.2. Settings.................................................................................14
General.................................................................................... 14
Basic Settings ....................................................................... 14
User Account ........................................................................ 15
Date & Time......................................................................... 16
Network................................................................................... 17
Network Configuration............................................................. 17
Port Settings......................................................................... 19
UPnP.................................................................................. 20
Video & Audio Settings ................................................................. 21
Basic Settings ....................................................................... 21
www.surveontech.com
2

Surveon CAM4220
Image Appearance.................................................................. 22
Video Streams....................................................................... 24
Audio Settings....................................................................... 25
PTZ......................................................................................... 26
Recording................................................................................. 27
Recording Basic Settings .......................................................... 27
Recorded File Management....................................................... 28
Event Notification....................................................................... 30
Event Server......................................................................... 30
Motion Detection .................................................................. 32
Tampering Detection .............................................................. 34
DI & DO............................................................................... 35
Event Settings....................................................................... 37
System..................................................................................... 40
microSD Card Management ....................................................... 40
System Status ....................................................................... 41
System log ........................................................................... 42
Firmware Upgrade.................................................................. 43
Reset to Factory Default .......................................................... 44
Export/Import & Reboot .......................................................... 45
3
Surveon Network Camera User Manual

Surveon CAM4220
Chapter1. Overview
1.1. Network Camera Introduction
The CAM4220 is professional IP network camera which uses Internet Protocol (IP) to
transmit video streams and control signals over a network. Capable of operating
both LANs and WANs, this network camera provides a complete budget-conscious
remote surveillance solution that is ultra clear and highly integrated. The camera
provides users an easy upgrade path from a traditional analog surveillance system
to the new digital surveillance system in a virtual environment.
The CAM4220 is user-friendly and easy to install. Utilizing a specialized Digital
Signal Processor (DSP), the network camera also provides Motion Detection and
Tampering Detection. These powerful features make the CAM4220 ideal for
environments that require remote surveillance or video transmission, especially
small residential or business premises.
1.2. Network Camera Features
Supports up to 8 simultaneous users
Built-in web server to allow real-time remote surveillance and control
using standard web browsers
Built-in microSD card slot for local backup
Supports dynamic IP, LAN, and the Internet (ADSL, Cable modem)
Supports most network protocols including: HTTP, TCP/IP, SMTP, DDNS,
DNS, DHCP, FTP, RTSP,CIFS, PPPoE
Supports 2-way audio
Automatically adapts image compression rate to available bandwidth
Provides Signal loss and motion-detection alerts (adjustable area and
sensitivity level)
Supports image recording and still image capture
www.surveontech.com
4

Surveon CAM4220
1.3. Network Camera Specifications
CAM4220
Image sensor 1/3” 1.3 megapixel progressive scan CMOS
Lens 2.8 - 11 mm varifocal lens, F1.4
Viewing
Angle Diagonal: 122°~35°
Horizontal: 96°~28°
Vertical: 72°~21°
Day/Night Yes
IR LED Yes (30 m)
Min
illumination 0 lux (IR LED on)
Iris control N/A
Shutter time 1/5 ~ 1/15,000 s
Camera Angle
Adjustment Pan:0°~340°
Tilt 30°~90°
Video
compression H.264 / MPEG-4 / MJPEG
Resolution Up to 1280 x 1024
Video control Auto Gain Control, Auto White Balance,
Auto Electronic Shutter,
Backlight Compensation,
Image Adjustment
Frame rate 15 fps at SXGA (1280 x 1024),
15 fps at HD720 (1280 x 720),
30 fps at VGA (640 x 480),
30 fps at QVGA (320 x 240)
Video stream 2 simultaneous streams at
H.264, MPEG-4,and MJPEG
Bit rate 32K~10Mbps, VBR, CBR,
controller frame rate and quality
Intelligent
video Motion detection, tampering detection
(blocked, redirected, defocused,
or spray-painted)
Built-in MIC Omni-directional
Audio
compression 32KHz, ADPCM
Audio input 3.5mm phone jack
Audio output 3.5mm phone jack
Alarm in 2, terminal block
5
Surveon Network Camera User Manual

Surveon CAM4220
Alarm out 1, terminal block
AUX power
output 12VDC 400mA
Video buffer 2 second pre-alarm, 30 second post-alarm
Event action Send snapshot or video clip by FTP
or email, record to NAS,
record to local storage, trigger DO
Supported
protocols IPv4, ARP, TCP, UDP, ICMP, DHCP, NTP,
DDNS, SMTP, FTP, HTTP, CIFS, PPPoE,
UPnP, RTP, RTSP, RTCP, 3GPP
Ethernet 10/100 Base-T / RJ45
Local storage microSD/SDHC card slot x 1 (Class 4/Class 6 only)
RS-485 1 (2 pins on terminal block)
SDK Surveon SDK 2.0
OS Microsoft Windows XP/Vista/7 (32bit)
Browser Microsoft IE 6.0 or above
Software Surveon VMS 2.0
Temperature Operation: -10 ~ 50 (14 ~ 122 )℃℉
Storage: -30 ~ 70 (℃-22 ~ 158 )℉
Humidity 20 to 95%
Power 12VDC
PoE (IEEE 802.3af) with Class 3
Power
consumption Max. 8.64W without AUX Power
Dimension ø128.8mm x 98.6mm(H)
ø5.07” x 3.88”(H)
Weight Net: 700g (1.54lb.)
Gross: 1370g (3.00lb.)
Certification Safety: LVD
EMC: FCC, CE
www.surveontech.com
6

Surveon CAM4220
System Structure
1.4. Network Camera Hardware Installation
To install the network camera:
1. Locate a suitable spot for installation.
2. Connect the camera to a power source (adapter or PoE).
3. Connect the camera to a switch using an Ethernet cable.
7
Surveon Network Camera User Manual

Surveon CAM4220
Chapter2. Connecting to the Camera
This section demonstrates how to connect to the network camera through a
Web Browser, Streaming Media Player, or with a mobile device using the 3GPP
Protocol.
2.1. Connecting with a Web Browser
To connect to the Network Camera with a web browser:
4. Launch the web browser (Microsoft ® Internet Explorer 6.0 or higher is
recommended).
5. Enter the IP address of the network camera in the address bar and
press enter.
6. The camera will prompt for a user name and password. The default
user name and password is admin/admin. If this is your first time
accessing the camera, please read the subsections to set up a new
password and/or install ActiveX, otherwise the live feed from the
network camera will be displayed in your web browser.
www.surveontech.com
8

Surveon CAM4220
Changing your Password
If this is the first time that the network camera is being accessed, the
camera will prompt you to change the administrator password after your first
login. Click Okay
1. Click OK when informed of the need to change your password. This will
cause a Configure Admin Password popup to display.
2. In the Old password field, fill in the old password (default is admin).
3. In the New password and Confirm new password field, fill in the new
password.
4. Click OK to change the password. If at any time you lose this password,
performing a hard reset of all camera settings will restore the
password back to admin.
9
Surveon Network Camera User Manual

Surveon CAM4220
Installing Active X components
You may be prompted to install ActiveX® components when accessing the
network camera’s Live View page; click “Yes” when prompted. You will be
able to access the camera after installation is completed. This action may
require administrator privileges.
If the dialog box suggests that you are not allowed to install ActiveX
components, try resolving the problem using the following steps:
1. In Internet Explorer, open Tools -> Internet Options -> Security. Click
the Custom level button.
2. Search for downloaded ActiveX controls and plug-ins. Select Prompt
and click OK
3. After installing ActiveX, go to Tools -> Internet Options -> Trusted
Websites -> Sites and add the IP Address of the camera
www.surveontech.com
10

Surveon CAM4220
2.2. Connecting with an RTSP Player
The CAM3260 supports connection through RTSP Media Players such as Real
Player and QuickTime Player.
1. Launch Real Player or QuickTime Player；
2. Select File -> Open URL, to open a URL dialog box.
3. Enter the camera URL in the address bar.
Note: The format for RTSP is: rtsp://<IP Address>/<Access>, where <Access>
can be found at Settings -> Network -> Port Settings -> RTSP Setting.
By default the <Access> value should be stream1 and stream2.
4. Click OK, the stream should begin playing.
2.3. Connecting with a Mobile Device
In order to access streaming video on 3GPP mobile devices, please make sure
the network camera is already online and connected to the Internet. In the IP
field under the IP Address section of the window, enter the IPV4 address of
the IP camera.
1. Change the settings under Settings -> Video & Audio -> Stream2 Setting
to 3GPP Mode
2. Launch the RTSP Player on the 3GPP mobile device and enter the URL
address for the camera. The video should start playing.
Note: The format for RTSP is: rtsp://<IP Address>/<Access>, where <Access>
can be found at Settings -> Network -> Port Settings -> RTSP Setting.
By default the <Access> value should be stream1 and stream2.
11
Surveon Network Camera User Manual

Surveon CAM4220
Chapter3. Web Interface
3.1. Interface Layout
This section demonstrates the layout of the network camera’s main interface.
The 4 main areas on the interface include: Main Menu, Company Logo, Main
Control, and Live Display Window.
Control Descriptions
Adjust Window Size: This feature is turned off by default; when
clicked, the display window size can be adjusted manually to fit the
screen. The screen size changes back to the actual image size (resolution).
Full-Screen: Turned off by default. Goes to full-screen mode when
press “ESC” to return to window mode.clicked;
Image Capture: Turned off by default; when clicked, captures the
current screen as an image in a new pop-up window and save it in the same
folder for Manual Record. The file name is set to be “Camera
Name”+yyyymmdd_hhmmss (the Camera Name can be changed from Settings
-> General -> Basic Settings).
ManualRecord: Turned off by default; when clicked，records the
current live video. Stops recording when clicked again. The default locate for
storing the recording is “C:\Surveon\Record”.
www.surveontech.com
12

Surveon CAM4220
Play Back: Turned off by default; goes to the Record File Management
page when clicked.
Audio-In: Turned off by default; allows audio to be transmitted to the
side. Click again to stop audio transmission.camera
Note: Note: Multiple users may access the live view page simultaneously and
receive audio from the camera, but only one user is allowed to send
audio to the camera side at once.
Mute: Turned off by default; turns off all audio when clicked, turns audio
back on when clicked again.
：Volume: Set to the current volume of the computer; drag to
adjust volume.
Language ：Language Settings; default in English. Choose the preferred
language by selecting from the drop-down menu (administrator only).
Available languages include English, Simplified Chinese, and Traditional
Chinese.
Streams：Choose Stream. Plays Stream 1 on the live
m 1 is selected ，plays Stream 2 when Stream 2 is
selected:
view window when Strea
Video Format：The compression format, available in H.264,
MPEG4, and MJPEG. Will only apply to the current stream
(administrator only)
Image size (resolution): Sets the resolution of the image. 4
options are available: SXGA (1280 x 1024), HD720* (1280 x
720), VGA (640 x 480), QVGA (320 x 240). This setting will
only apply to the current stream.
Note: 1280 x 720 is not recommended as the sensor's vertical output will be
cropped. Surveon recommends use of SXGA (1280 x 1024) instead.
Digital Zoom: Digitally zoom in on the display when clicked.2
s are available when clicked:option
Zoom in
Zoom out
Digital Output: Turns on or off Digital Output;
same as Settings -> Event Notification -> DI & DO
13
Surveon Network Camera User Manual

Surveon CAM4220
3.2. Settings
Camera settings may be changed by clicking on the Settings link located in
the title bar.
General
General setting menus are found under the General title.
Basic Settings
Basic settings may be accessed by clicking the Basic Settings link under
General. Main options include: Host Name 、Camera Name 、LED Indicator
Host Name: by default set to “model name + MAC address”; displays on the
center of the main page.
Camera Name:by default set to “model name”; after selecting Camera
Name” from Settings -> Video & Audio -> Basic Settings, the camera name
will show on the display.
Note: Host Name and Camera Name can be letters or numbers.
LED Indicator: turns on or off the LED indicator on the camera
Click OK to save or Cancel to abort the changes before you leave the page.
www.surveontech.com
14

Surveon CAM4220
User Account
The User Account section mainly controls the account information of the
users and their privileges. Available functionality includes Add, Edit and
Remove User Accounts.
The system allows for 2 types of users: Administrators and Operators.
Administrators have full privileges, while Operators can only access the live
view page. If anonymous, or free, access is allowed, anonymous users will
have the same privileges as Operators.
Adding Accounts
Clicking on “Add” will bring out the Add Account window. New accounts will
be activated when all information fields are completed.
Note: User Names and Passwords can be in combinations of letters, numbers,
“:”, “-“, “_”, and 4-20 characters in length, but must begin with an
alphabet letter
Up to 10 accounts can be added. The “admin” account cannot be
removed. Users that are logged-in cannot be edited or removed
Editing Accounts
First select an account and click “Edit”; this will bring out the Edit Account
window. All information except the Account Name can be changed here.
Deleting Accounts
First select an account and click “Remove” to delete the account.
Enable Free Access Without Login
Check this option to allow anonymous access without a password.
Click OK to save or Cancel to abort the changes before you leave the page.
15
Surveon Network Camera User Manual

Surveon CAM4220
Date & Time
The three main parts of this section include Current Date & Time,Time Zone
Settings, and Time Settings.
Current Date & Time displays the current date and time of the camera.
Time Zone Settings
Time zone can be set using the dropdown menu (only selectable when
synchronizing with an NTP server
Time Settings
There are 3 ways to set the time:
Synchronized with NTP server - Synchronize with the NTP Server. Clicking
on Update will synchronize the current time with the NTP Server. Select
Periodically synchronize clock with internet servers to periodically
synchronize with the server.
Manual update - Update the time manually.
Synchronize with computer time -Synchronizes the time with the
computer’s internal clock.
Click OK to save or Cancel to abort the changes before you leave the page.
www.surveontech.com
16

Surveon CAM4220
Network
Network Configuration
matically - Automatically acquires IP address. If DHCP is
ill in IP address,
PPPoE requires a user name and password from your ISP.
IP & DNS Settings
Get IP address auto
supported and free IP is available, this option allows the camera to
automatically acquire an IP address (both LAN and Internet)
Use fixed IP address - Sets a fixed IP address. Manually f
Subnet mask, Default gateway, Primary DNS, and Secondary DNS. The
network camera can be connected to the network upon completion.
PPPoE Settings
Connecting using
Select “Enable PPPoE” and fill in valid user name and password to connect
the camera to the Internet.
17
Surveon Network Camera User Manual

Surveon CAM4220
DDNS Settings
Connecting using Dynamic DNS requires registration on third-party websites
for DDNS services. Select desired DDNS service website, check the “Enable
DDNS” option, and fill in valid user name and password. You can then access
the camera through the registered domain name.
Click OK to save or Cancel to abort the changes before you leave the page.
www.surveontech.com
18