Sven Aggressor User manual

www.sven.ѵ
OPERATION
MANUAL
Aggressor
Flight Joystick

CONTENTS
1. DESCRIPTION ...................................................................................
2. SAFETY PRECAUTIONS .......................................................................
3. PACKAGE CONTENTS ........................................................................
4. SPECIAL FEATURES ............................................................................
5. SYSTEM REQUIREMENTS .....................................................................
6. DESCRIPTION OF THE DžONSTRUCTION .....................................................
7. CONNECTION AND INSTALLATION .........................................................
8. TROUBLESHOOTING ........................................................................
Congratulations on the purchase of Sven product!
Please read this Operation Manual before using the unit and retain this Operation Manual in safe
place for future reference.
COPYRIGHT
© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).
This manual and information contained in it are copyrighted. All rights reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted eԚorts to make this Manual more exact, some discrepancies may occur. The
information of this Manual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damages which have arisen from the information,
contained in the given Manual.
UNPACKING
Unpack the device carefully. Make sure there are no accessories left in the box. Check up the
device for damages; if the product was damaged during transportation, address the ԛrm which
carried out the delivery; if the product functions incorrectly, address the dealer at once.
2
2
2
2
2
3
4
6
Technical support is on www.sven.Н
ENG
1
Operation Manual Aggressor

1. DESCRIPTION
Aggressor Flight Joystick can be used in diԚerent games such as simulators, arcades, shooter
games etc. This device supports Windows XP/Vista/7/8 and requires DirectX 7.0 and up. Drivers
are not needed for operating this device, however, their installation is necessary for activating
vibration feedback.
2. SAFETY PRECAUTIONS
• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out
by qualiԛed service centre staԚonly.
• Protect the device from direct impact of high humidity, dust, strong magnetic ԛelds, vibrations, high
temperatures, toxic liquids and gases.
• Instructions for device maintenance: for cleaning the case of the device please use clean soft
cloth. Do not use such solvents as gasoline or spirit for cleaning, since these solvents can damage
the surface of the device.
• Do not drop the device not to have it damaged.
3. PACKAGE CONTENTS
• Flight Joystick — 1 pc
• Software CD disk —1 pc
• Operation manual — 1 pc
• Warranty card — 1 pc
4. SPECIAL FEATURES
•Ergonomic design of the Flight Joystick
•Supports: DirectX 7.0 and higher, Windows XP/Vista/7/8
•USB Interface
•Vibration feedback for higher realistic eԚect
•4 axes, D-Pad and 12 additional buttons
•USB cable length 1.8 m
•Rubber coating for superior comfort
•Rubber suction caps for secure ԛxation to the table
5. SYSTEM REQUIREMENTS
•USB port available
•Operational System Windows XP/Vista/7/8
•DirectX 7.0 Version and up
ENG
2
Flight Joystick

VIBRATION
ON OF
1
8
10
12
11
7
9
2
5
3
4
6
a
b
c
d
ef
i
j
g
h
e
Fig. 1. Front view
6. DESCRIPTION OF THE DžONSTRUCTION
aD-Pad
bButtons 3–6
cButton 2
dHandle
eButtons 7–12
fHand throttle control
gButton 1
hUSB cable
iOn/OԚVIBRATION switch
jRubber suction caps
Fig. 3. Bottom view
Fig. 2. Back view
ENG
3
Operation Manual Aggressor

7. CONNECTION AND INSTALLATION
•Install the device on an even surface on its suc-
tion caps j.
•Connect the device to an available USB port of
the PC via the built-in USB cable h. When con-
necting to your PC, the device is automatically
detected as a game controller and is fully ready
for use. However, for vibration feedback activa-
tion it is necessary to install drivers.
•Insert the Software CD disk into the drive of
your PC and launch setup.exe for installation of
drivers on your PC. For checking choose Start о
Control Panel оGame Controller.
•After connecting the controller to your PC,
Game Controllers window will automatically open
up on your desktop, the driver will detect the
device as USB all-in-one game controller (Fig. 4).
•Press Properties button in order to test func-
tioning of all features and control elements of the
device. Properties: USB all-in-one game
controller window will open up with the ԛrst tab
Test (see Fig. 5).
Flight Joystick Test
•Buttons 1–12. Press buttons of the Ԝight joystick
from 1 to 12: a corresponding numerical button
on Function Test bookmark of your PC interface
will illuminate.
•Turbo function. Click Turbo on your PC interface
(Fig. 5), the word Turbo will illuminate. Click the
corresponding numerical button that you want to
set up with Turbo function, and the outline border
of this button will become white. If you press the
button on the joystick, the corresponding button
on the PC interface will light up. Turbo function
setup is ԛnished. To cancel this setup press Clear
button.
•Fluctuating. Turn the joystick handle dforward,
backward, left and right by pressing D-Pad a,
and the corresponding block of the X/Y axis will
shift simultaneously. The cross sign in the X axis;
Y axis ԛeld will shift according to the position of the joystick handle.
•Revolving function. Revolve the handle of the joystick to the left or right, and the corresponding
block of RZ axis will shift simultaneously. RZ axis scale will gradually ԛll with green color.
Fig. 4
Fig. 5
ENG
4
Flight Joystick

•Hand throttle control. Shift the hand throttle
control fto the left or right, the corresponding
block of Z axis will shift simultaneously. Z axis
scale will gradually ԛll with green color.
•
D-Pad. Revolve the D-pad ain diԚerent
directions to test 8-way direction inputs, which will
be displayed in an 8-arrow circle located in the
bottom left corner of the PC interface (Fig. 5).
•
Reprogramming of buttons. Click Keyǀap
button in the menu (Fig. 6) on your PC interface to
start programming keys in the setup window; then
click the Set button in front of the digital buttons
that need to be reprogrammed and press the
same button on the Ԝight joystick to conԛrm
reprogramming.
Example: reprogramming of button 3 to but-
ton 5. Click the Set button in front of button 3,
the Set button will Оash, then press button 5
on the Оight joystick and the button in the third
green circle will change from 3 to 5.
Note! After programming you can save new settings or cancel them. Below the setup
window there are three keys: Default, Load, and Save. The Нrst key returns back to initial
settings, the third key allows to save new settings to the key layout, while the second one
allows to download the saved settings.
Fig. 6
Fig. 7 Fig. 8
ENG
5
Operation Manual Aggressor

•Vibration feedback function. Enter Vibration tab (Fig. 7) to test vibration feedback function.
Fluctuating and swaying action of the Ԝight joystick corresponds to motor vibration; period (Period)
and range (Mag.) of vibration can be adjusted during vibration test. In the center there is a ԛeld that
shows shifting of joystick handle with vibration. Vibration indicators are on the left and on the right.
Shifting to the left and right you activate Left indicator, while shifting up and down you activate
Right indicator. Alternatively, you can click Auto for auto-test.
Note! Vibration feedback function turns on and off by ON/OFF VIBRATION switch ion the
Оight joystick.
•D-pad calibration. If the indicating cursor of each axis does not return to the central position or
does not ԛx in all the four sides during tests, please click Adjustment menu (Fig. 8) for calibration:
Check оNext оCheck оNext оSave.
Supplement for Vista operating system:
•The driver for Vista has been updated for compatibility with the operation system.
•As Vista 32bit and 64bit are not compatible with each other, so the Ԝight joystick is supplied with
two separate setup drivers for your choice.
8. TROUBLESHOOTING
Problem
After installation of the
software, the game controller
does not work normally.
Some analog axis goes into
eԚect automatically after
you enter the game.
The Ԝight joystick does not
operate in the vibration
mode.
After connecting the Ԝight
joystick, its driving program
can’t be found.
After entering the game,
vibration feedback operates
automatically.
During the game vibration
feedback is insuԝcient.
Solution
ƴ. Check whether the joystick is properly connected to your PC.
B. Make sure that the installation was carried out correctly.
C. Install DirectX 7.0 and up version.
D. Restart your PC, if the controller still doesn’t work .
Calibrate the Ԝight joystick and conԛrm the calibration.
After exiting the game, disconnect the controller from the USB
port and connect it again. If it still can’t work normally, please
restart the computer.
Check whether the previous installation of drivers was made
correctly. Enter My computer оProperties оHardware о
Device manager and delete the corresponding equipment with
«!» mark and reconnect the Ԝight joystick to the PC. Then your
PC will ԛnd the driving system.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set the force of feedback.
If none of the above mentioned solutions removes the problem, please refer to nearest authorized
service center for consultation by qualiԛed specialist. Never try to repair the device on your own.
ENG
6
Flight Joystick

ǀǢǘǙǟǰ: Aggressor
ƼǠǣǢǤǦǙǤ ǖDŽǢǥǥǜǜ: ǂǂǂ «DžƾƴǁƸƼdžDŽƹƿ»,
111024, DŽLj, Ǘ. ǀǢǥǞǖǔ, ǧǟ. ƴǖǜǔǠǢǦǢǤǡǔdz, ǘ. 65, ǥǦǤ. 1.
LJǣǢǟǡǢǠǢǫǙǡǡǔdz ǢǤǗǔǡǜǛǔǪǜdz ǖDŽǢǥǥǜǜ: ǂǂǂ «DŽdž-Lj»,
105082, Ǘ. ǀǢǥǞǖǔ, ǧǟ. LjǤǜǘǤǜǩǔ ǑǡǗǙǟǰǥǔ, ǘ. 75, ǥǦǤ. 5.
LJǥǟǢǖǜdz ǗǔǤǔǡǦǜǝǡǢǗǢ ǢǕǥǟǧǚǜǖǔǡǜdz ǥǠǢǦǤǜǦǙ
ǖǗǔǤǔǡǦǜǝǡǢǠ ǦǔǟǢǡǙ ǜǟǜ ǡǔ ǥǔǝǦǙ www.sven.ѵ
ƷǔǤǔǡǦǜǝǡǯǝ ǥǤǢǞ: 12 ǠǙǥ. DžǤǢǞ ǥǟǧǚǕǯ: 2 ǗǢǘǔ.
ǃǤǢǜǛǖǢǘǜǦǙǟǰ: «Džƶƹǁ ǃdžƹ. ƿǜǠǜǦǙǘ»,
176 Ƹǚǧ NjǜǔǦ DŽǢǧǘ, д02-02, DžǜǡǗǔǣǧǤ, 427447.
ǃǤǢǜǛǖǙǘǙǡǢ ǣǢǘ ǞǢǡǦǤǢǟǙǠ «DžǖǙǡ DžǞǔǡǘǜǡǔǖǜdz
ƿǜǠǜǦǙǘ», 48310, Ljǜǡǟdzǡǘǜdz, ƾǢǦǞǔ,
ƾǢǦǢǟǔǩǘǙǡǦǜǙ, 15. DžǘǙǟǔǡǢ ǖƾǜǦǔǙ.
Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,
д02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,
Kotka, Finland, 48310. Made in China.
® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.
2.0 Multimedia Speaker System
Automatic Voltage Regulator
DžǦǔǕǜǟǜǛǔǦǢǤ ǡǔǣǤdzǚǙǡǜdzDžǦǔǕǜǟǜǛǔǦǢǤ ǡǔǣǤdzǚǙǡǜdz
Automatic Voltage Regulator
2.0 Multimedia Speaker System2.0 Multimedia Speaker System
SPS-619
Aggressor
Flight Joystick