Swann DVR4-1525 Manual

1
The Setup Wizard
• System Language
• Disable or enable the Setup Wizard
• Configure Password
• General Configuration
• Daylight Savings & Internet Time
• Configure your Email
• Live View Mode
• Live View Icons & Controls
EN
QW4_81525030615E | © Swann 2015

4
System Language: Choose a language you would like the system menu
to be displayed in. Select from English, Russian, French and Spanish.
• Click “Apply” to continue.
• Click “Exit” to exit the Setup Wizard.
System Language 1
2
Welcome to the Set-
up Wizard! The Setup
Wizard automatically
runs the first time you
start your DVR and will
guide you through all
the important settings
you need to get up and
working. Please be pa-
tient as it can take a
moment for the wizard
to appear after turning
on your DVR.

73
Disable or enable the Setup Wizard 2
By default, the setup wizard will display each time the DVR starts or is
re-booted. As the setup wizard is only required the first time you turn on
the DVR, click the checkbox to disable this.
• Click “Next” to continue.
• Click “Exit” to exit the Setup Wizard.

2
Configure Password 3
This step is really easy. You just have to give your DVR a new password.
Admin Password: The default password is “12345”. Click the dialogue box
and enter this password.
New Admin Password: Click the checkbox to enable a new password.
New Password: Enter a new password. The password can be up to 16 char-
acters in length.
Confirm: Enter your new password again to confirm.
• Click “Previous” to go back to the previous screen.
• Click “Next” to continue.
• Click “Exit” to exit the Setup Wizard.
4

55
Time Zone: Select the correct time zone relevant to your region.
Date Format: Select a preferred display format.
System Date: If the date is not correct, click the calendar icon to select
the correct date.
System Time: If the time is not correct, click the clock icon to select the
correct time. The DVR supports a 24-hour clock.
Live View Mode: 3 x 3 is the default mode and will display up to 8 video
channels on-screen. Selecting 1 x 1 will display the first video channel
full-screen. Other views available are 2 x 2, 1 + 5 and 1 + 7.
• Click “Previous” to go back to the previous screen.
• Click “Next” to continue.
• Click “Exit” to exit the Setup Wizard.
General Configuration 4

86
The DST function allows you to configure your DVR to automatically ad-
just its time for Daylight Savings in your time zone. You can set when
daylight saving time starts and ends.
Enable DST: Click the checkbox if you would like the DVR to adjust the
time when Daylight Savings time begins.
From/To: Here you can define when Daylight Savings applies to your
location, so you’ll need to tell the DVR when it applies to you.
DST Bias: This refers to the difference in minutes, between Coordinated
Universal Time (UTC) and the local time. Select the time that DST has
increased by in your time zone.
The NTP (Network Time Protocol) function allows the DVR to automat-
ically sync its clock with an on-line server, which gives it the ability to
constantly have an accurate time setting. Obviously this is very impor-
tant for a security system and is enabled by default. We don’t recom-
mend changing any of the default settings.
• Click “Previous” to go back to the previous screen.
• Click “Next” to continue.
• Click “Exit” to exit the Setup Wizard.
Daylight Savings & Internet Time 5

3
Configure your Email 6
1. Populate each field as shown in the above screenshot (the emails shown
are examples only, don’t use these).
2. Click “Test” to verify that the information you’ve entered is correct. A mes-
sage will appear on-screen indicating a successful email test. Click “OK” to
continue.
3. Click “Send UID” to receive an email containing your DVR’s UID so you can
use it to access from SwannView Plus on your mobile device or computer.
Click “OK” to continue.
4. Click “OK” to complete the setup wizard.
• Click “Previous” to go back to the previous screen.
• Click “Exit” to exit the Setup Wizard.
7
You can configure an
email account so that
your DVR sends you
email alerts when
events occur. We rec-
ommend using Gmail.
To create an account
go to (www.gmail.com)
and then input the de-
tails here.
If you receive an error during verification, check that you’ve input
your email address and password correctly and check the con-
nection to your network is ok. Also check your Gmail account set-
tings to make sure that “Access for less secure apps” is enabled.

68
Live View is the default display mode for the DVR. Each camera connected will be displayed on-screen. You can check the status or operation of
your DVR and cameras by right-clicking the mouse to access the Menu Bar. For smartphone and tablet users, you can use the free SwannView
Plus app to turn your mobile device into a monitoring centre for the DVR. Take a look at the included “The SwannView Plus Mobile App” quick start
guide for further information.
Live View Mode 7
Double-click a live
video channel to
view full screen.
Status Icons
Menu Bar
09/12/2014 10:30:15 Tue
Camera 02
09/12/2014 10:30:15 Tue
09/12/2014 10:30:15 Tue 09/12/2014 10:30:15 Tue
Camera 01
Camera 03 Camera 04
Camera Toolbar

99
Live View Icons & Controls 8
Status Icons
Menu Bar
1. Click this to access the Menu.
2. Click this to display a full-screen video channel.
3. Click this to select one of the multi-screen viewing
modes available.
4. Click this to display the previous channel(s).
5. Click this to display the next channel(s).
6. Click this to automatically switch between channels
at specific intervals (known as “Dwell Time”).
7. Click this to select either continuous record mode
or motion detection record mode.
8. Click this to change the display contrast level.
Please note, this doesn’t change the contrast level of
the camera(s).
9. Click this to play back video that has been recorded
on the same day.
10. Click this to disable the internal buzzer when
events or errors occur. Click “Yes” or “No” to confirm.
For more information about the functions avail-
able within the Menu, please consult the user
manual available at our website.
The alarm icon indicates
that an event such as mo-
tion, video loss or tampering
has occurred.
The recording icon indicates
that the camera is currently
recording (either manually
or via motion detection).
Indicates the channel
has lost video feed
from the camera.
This icon will appear on-
screen when there is an er-
ror or notification. Click the
icon to view the message.
Camera Toolbar
Clicking a live video channel reveals the Camera
Toolbar which provides quick access to instant
playback, audio monitoring, digital zoom and the
ability to change image settings such as bright-
ness, contrast and saturation.
1
2
3
4
5
6
7
8
9
10

10
General Configuration EN
Confused on which location to install your cameras? The cameras included with your security system can be
installed in a number of different locations. Camera location can depend on the following -
1. Distance from the camera to the DVR.
2. Environmental conditions.
3. Lighting conditions.
4. The area that you would like to monitor.
When you position cameras correctly, you can eliminate the need for additional cameras to cover your target
area and maximise the efficiency of your security system. On the flip side, if you position cameras incorrectly,
it can lead to blind spots or to have objects that are not visible or too far for the cameras to view in detail. Keep
these points in mind to get the most out of your security system.
Mount cameras at an elevated position - Mounting your cameras at an elevated position, can keep your cam-
eras out of range of vandals or would be burglars. It also allows your camera to have a high vantage point in-
creasing its viewing area.
Cover your target area - When placing cameras, make sure you provide ample coverage, but not in excess.
For example, if you are trying to cover a backyard gate, don’t zoom in to only have the gate in frame. Position
the camera to cover part of your backyard so you capture as much area as possible without sacrificing video
quality.