Swiss Peak P329.841 User manual

RCS RECYCLED PLASTIC
SWISS PEAK
TWS EARBUDS 2.0
P329.841

Content
English p. 3
Deutsch p. 9
Español p. 15
Français p. 12
Italiano p. 21
Svenska p. 18
Nederlands p. 6
Polski p. 24

ENGLISH
PLEASE REMOVE THE ISOLATOR STICKER FROM THE EAR BUDS BEFORE FIRST USE.
PARING FOR DOUBLE EARBUD CONNECTION
The earbuds will turn on automatically when users take them out of charging case, and will turn o
when users put them back into the charging case.
The earbuds will pair with each automatically when they are on and enter into pairing mode
automatically. Not need to press any button. Turn on Bluetooth on your device and select “RCS
Swiss Peak 2.0’’ to connect the earbuds to your device.
HOW TO CHARGE THE EARBUDS
• Put the earbuds in the charging case
• The light on the charging case will turn on and starts charging the earbuds.
DEVICE LAYOUT:
1- Charging case
2- Type-C input
3- Battery/ Charging indicator
4- Earbuds touch function
1.
4.
2. 3.

It takes around 1,5 hour to fully charge the earbuds
To charge the charging chase, connect the case with the Type-C cable to a power source.
It takes around 2 hours to fully charge the charging case.
FUNCTIONS
You can operate the earbuds with the touch function on the earbuds. Please check below
instructions.
Play/pause music Short press left/right earbud
Pick up phone call Short press left/right earbud
Reject phone call Long press left/right earbud
End phone call Short press left/right earbud
Next song Double press right earbud
Previous song Double press left earbud
SPECIFICATIONS:
Speaker driver (mm) 10mm*2
S/N Ratio (dB) 85dB
Frequency range (Hz-KHz) 20Hz-20KHz
Continuous playing time 4 hours
Charging time 1.5 hour
Battery capacity Earbuds : 40 mAh
Battery capacity Charging station 400 mAh
Mic function : yes
Pick up function : yes
BT version : 5.3

NOTICE:
1. Keep the product dry; do not place the product in damp places.
2. Keep out of direct sunlight and high temperatures High temperatures may result in damage.
3. Keep out of cold temperatures, this will help avoid internal damage.
4. Do not disassemble the product.
5. Avoid dropping the product.
6. Do not continue to charge the product over 10 hours.
7. When charging use the Type-C charging cable that came with the product.
DANGER!
To avoid hearing damage, limit the time you use headphones at high volumen and set the volumen
to a safe level. The louder the volumen, the shorter the safe listening time is.