Sygonix 1557806 User manual

App Instruction Manual
Smart WiFi switchable
plug-in socket
Item No. 1557806 / CP1M (with metering)
Item No. 1557807 / CP1
www.conradconnect.de

- 2 -
Contents
Conrad Connect .............................................. 3
Symbols........................................................... 3
App to device communication ......................... 4
Indicator lights on smart device....................... 4
Core functions ................................................. 5
Installation ....................................................... 6
Deinstallation................................................... 6
Multiple mobile devices ................................... 6
User account ................................................... 7
App landing page ............................................ 9
App settings................................................... 10
Software/Firmware updates .......................... 10
Adding a new device ..................................... 12
Device settings .............................................. 13
Overcurrent Protection .................................. 14
Metering......................................................... 15
Control........................................................... 17
Scenes........................................................... 24
Device Reset ................................................. 26

- 3 -
Conrad Connect
Your product is compatible with the Conrad
Connect IoT platform at www.conradconnect.de.
You can set up a personal account at the given
URL.
Symbols
The following instructional symbols are used in
this instruction manual.
This triangle indicates important
instructions contained in these
operating instructions that must be
followed.
This symbol indicates that special
advice and notes on operation are
provided.

- 4 -
App to device communication
■In order to add a new device to the app,
the mobile device that runs the app and the
smart device must connect to your WLAN.
■Once a new device was added, you can
control the smart device through the app via
WLAN or mobile network.
Indicator lights on smart device
Observe the indicator lights during set up and
use of your smart device.
On/Off
On Device is powered on
Off Device is powered off
Wi-Fi
Flashing
(Fast)
Device not connected to
WLAN
Flashing
(Slowly, 30s)
Authentication failure.
Check WLAN password.
On Device connected to WLAN
4s on/ 0.25s off No client-server connection
is possible

- 5 -
Core functions
Real-time metering of power
consumption of connected load.
Nr. 1557807 does not support
metering and therefore does not
show any readings for functions
related to metering.
Recording, retrieval and display of
power consumption statistics:
■Wh (W < 1000), kWh
■Cost
Turning the smart device on and
off via app over mobile or WLAN
network.
Turn the smart device on or off via
timer.
Controlling on and off times by
schedule rules.
Socket reboot: smart device restarts
a connected router/access point
when the Internet connection fails.

- 6 -
Installation
Apps are available for Android and iOS
mobile devices. Make sure your mobile device
satises the minimum requirements as outlined
on the app page before downloading.
1. Head to the respective app store and
download the app named 'Sygonix Home'
onto your mobile device.
2. Set up a user account as outlined under
User account.
Deinstallation
If you de-install the app from your mobile
device, the settings are not lost and become
available again as soon as you re-install the
app and login with the same account details.
Settings are stored under your 'Sygonix'
account in the cloud. Refer to User account.
Multiple mobile devices
You can install the app on multiple mobile
devices and login with the same account
details to control the same set of smart devices
from different mobile devices.

- 7 -
User account
A 'Sygonix' account is required for you to
operate the smart device.
Your smart device cannot be linked to
two accounts at the same time.
Adding the smart device to a second
account will remove it from the rst
account.
Reset the smart device before linking
to another account.
Setting up a new account
1. Open the app.
2. Press Sign Up.
3. Enter user name and password, then
conrm with Sign Up.
4. A new account will be set up for you.
Wait until you receive the conrmation for
successful setup.
Logging in
1. Open the app.
2. Press Login.
-If you have logged in before, the
username and password should appear in
the corresponding elds.
-Tick Login automatically if you wish
the app to log you in when you start the
app.
3. Conrm with Login.

- 8 -
4. If you login successfully, the landing page
with the device list will appear.
-If no smart devices have yet been set up,
the device list is blank.
Account settings
On the landing page press to open the
account settings.
Account settings allow you to:
■ Add a prole picture
■Change the account name
■Change the account password
■Log out of your account
After logging out of your current account you
can log in with a different one.
Integrating with Conrad Connect
Note that your 'Sygonix' account is independent
of Conrad Connect.
If you wish to integrate your smart device
with Conrad Connect you require a separate
Conrad Connect account.
Refer to www.conradconnect.de

- 9 -
App landing page
Add new devices
App settings
Account settings
Device list
Turn device on/off
Show Devices Show Scenes

- 10 -
App settings
Press to open app settings:
Language Select app language
Price for
electricity
Select currency
Set the charge for one kWh
Manual Download operating
instructions
About
See app version and available
app updates.
Links to www.conrad.com and
www.conradconnect.de
Software/Firmware updates
Two types of updates
There are two types of software updates
indicated in the app:
■App software updates
■Firmware updates for your smart device
The rmware of your smart device is updated
via the app.
Available rmware updates are indicated in the
app in the device list by .

- 11 -
For all rmware updates the smart
device and the mobile device that
runs the app must be connected to
the same WLAN network during the
update.
Updating rmware
1. Make sure that mobile device and smart
device are connected to the same WLAN
network.
2. Press button next to the device you
want to update in the device list.
3. In the rmware section press .
4. The rmware of the smart device will be
updated.
Updating app software
App software updates are managed as other
apps through the corresponding app store.

- 12 -
Adding a new device
During set-up make sure to keep the
mobile device running the app and the
smart device within receiving distance
of the wireless access point.
1. Connect your mobile device running the app
to your WLAN network.
2. Open the app and navigate to the landing
page.
3. Press +.
4. Select the smart device type you want to
add.
5. Follow the on-screen instructions in the app.
6. When you see the conrmation notication,
the smart device appears in the device list.
7. Add more devices or exit.
It is strongly recommended that you
set up your router or access point
(AP) to use WPA2-Personal with PSK
encryption for authentication.

- 13 -
Device settings
1. Select the smart device from the device list
on the landing page.
2. Press to open the device settings.
3. Adjust settings:
Icon Select an icon for your device.
Name Give your device a name.
Firmware
version
Indicates the rmware version
of the smart device.
About MAC address and serial number
of smart device
Reboot
■In case that your internet
connection becomes
unstable or disconnects,
Reboot allows the smart
device to restart a router that
is connected to the smart
device.
■Enable/disable with slider
Factory
Setting
Reset
Resets the smart device to its
factory default settings.
Refer to section Device Reset
for more information.

- 14 -
Overcurrent Protection
Activation
If the current of the power plug-in socket
(CP1M only) exceeds the maximum
permissible current (see operating instructions
that came with your device), the overcurrent
protection is triggered and the socket
deactivated.
Reset
To reset the plug-in socket, remove the load
and press the On/Off button on the socket to
re-activate it.

- 15 -
Metering
Real-time wattage
Back to Home
Real-time wattage
Turn device on/off

- 16 -
Energy consumption
Hours/Days/Months switch
Records
Currency
Energy/Cost display

- 17 -
Control
Remind yourself of the possible
dangers the device you intend to
connect can pose to your environment.
Read the instruction manual that came
with the product you are going to
connect to the smart device to nd out
if it is suitable to be operated without
attendance.
If it is not, then do not use it in
conjuction with timer and schedules.
■A heater can cause re if left
unattended!
■A kettle that contains no water may
cause re!
■A coffee maker may overheat if not
turned off on time and cause re!

- 18 -
Timer
Timer turns device on or off
Time settings
Quick time setting
Start/Stop timer
Note:
■Off : turns the smart device off
■On : turns the smart device on

- 19 -
Schedule
Rule enabled
Rule disabled
Add new schedule rule

- 20 -
Adding a new schedule rule
Rule turns smart device on or off
Weekdays
Fixed date
Time
1. Press to start creating a new rule.
2. Decide if the new rule shall turn the device
on or off. Select On–Off accordingly.
3. Set on which weekdays the rule is active.
-If you want the smart device to be
controlled on a specic date, deselect all
weekdays and set a xed date instead.
4. Set the time at which the rule takes effect.
5. Save your rule with Save.
6. Return to the schedule page and enable
and disable rules as required.
7. Study the examples that follow.