Sylvania SDPF7095 User manual
USER MANUAL
ENGLISH
SYLVANIA is aregistered trademark of OSRAM Sylvania Inc. used under license.
SDPF7095
Key Points
This manual includes security measures and correct operating methods. For personal
safety, please make sure to read this manual before using. Thank you!
1. The machine adopts capacitive touch screen, you can just touch it by finger or click with
capacitive pen for operation. (Never use the sharp objects to click the screen, or the touch
screen may be damaged).
2. Do not put the device at any high temperature, high humidity or dusty place.
3. Do not drop or crash the device to prevent the violent impacting between the display and
the capacitive touch screen. Or the customers have to take the consequence by them-
selves.
4. Don’t use the different type charger or it may make the device burned. We assume no
liability for the damage. Please contact with our agent if you need the original adaptor.
5. Do not disconnect the device while formatting, or it may make the error.
Our company won’t bear the duty for the loss of the memory erasing on account of the
damage, repair or some other reason. Please operate the device according to the user
manual rightly and backup the important data in time.
6. Do not dismantle this device by yourself, and do not polish it with alcohol, dilution,
or benzene.
7. Do not use this device where electronics is forbidden, such as on the airplane.
8. Do not use this device while walking and driving, avoiding traffic accident.
9. USB is for connecting u-disk only.
For any support needed for this device please contact the
company or the authorized
dis-tributor. Any unauthorized dismantling of the device will make the warranty null and
void.
We reserve the right to keep the change of the products, the specification and design is
subject to change without notice!
This micro USB port is for uploading photos from USB drive only, it is not for
connecting computer. Photos in the USB drive can’t be displayed directly in
the frame, you have to upload/import photos from USB drive to the frame first.
You can export/copy photos from the frame to USB drive. Remarks: The usb
flash drive is recognized as “SD card” when it was inserted in the frame.
Note: Need a OTG cable to connect this USB to this unit. This OTG cable is
not included.
3. USB
2. RESET
Use a needle or paper clip to reset unit.
1.POWER
Use power adapter to power on the frame.
When it is on, press and hold power button for approximately 3 seconds to
access reboot or power off menu. Short press on power button will turn
off/onscreen (but leave the photo frame in on position).
Power off: To avoid any possible damage to the frame, please do not
unplug the power adapter from the frame directly, please always press
the power button for 2 seconds and tap “Power off” .
1
2
3
4
5
1
5. DC
Connect DC adapter to power on the device.
Load external micro SD memory cards here. Photos in the micro SD card
can’t be displayed directly in the frame, you have to upload/import photos
from micro SD card to the frame first. You can export/ copy photos from
the frame to micro SD card. If you want to backup the photos in the frame,
please follow the below steps: step 1: get a micro SD card(maximum
32GB), and put it in the micro SD card slot. step 2: tap the screen and go to
“Settings”
step 3: go to “Backup and Restore”
step 4: tick “ Automatic backup”
step 5: tap “Backup frame to SD card”
Then you will see a sentence “Last successful backup: 29 December...”
under “Backup frame to SD card”.
4. Micro SD (Support maximum 32G micro SD card)
2
3
Getting started
Congratulations with your brand new Frameo photo frame!
If you are new to using Frameo then start by following the Frameo quick setup
or follow the on-screen guide when powering it on for the first time.
Once you have set up your Frameo frame, you can start connecting it to your
friends and family.
Frameo app
To send photos to your frame, use the Frameo app for iOS or Android.
Find the Frameo app by scanning this code:
For Android:
Search for “Frameo” on Google Play.
For iOS:
Search for “Frameo” on App Store.
4
Frameo quick setup
When starting your frame for the first time, you will need to setup the frame.
●Select alanguage. This will be the language used on the Frameo.
●Connect your frame to the internet by connecting it to aWi-Fi.
●Frameo may ask you to update to the latest version. It is recommended
to update your frame before continuing if asked to.
●Enter your name, and the location where you have placed your frame e.g.
“John Doe” and “Living room”, “Kitchen” or “Office”. Finally set the
timezone if not already correct.
Start using Frameo
Next step is to connect Frameo with your friends and family by providing them
with a code from your frame.
If you want to be able to send photos to the frame yourself, start by downloading
the app for iOS or Android on App Store or Google Play. Then use the code to
connect your frame and app as described below.
Connecting a new friend
Make sure that your friend has downloaded and installed the
Frameo app.
Click the add friend icon on your frame . A dialog will appear showing a
connection code, which is valid for 12 hours.
Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM,
phone call, to your friend.
Once your friends have added the code in their Frameo app, they will automat-
ically appear on your frame and be able to send you photos.
Read chapter Change options for a friend to allow connected friends, to retrieve
and share the connection code via the smartphone app.
5
6
Navigating your Frameo
Swipe left or right to go through your photos.
To access the menu, simply tap once on the screen.
In the menu you will find the most used features.
Add friend
This will generate a code that you can share with your friends and family so they
can connect and send photos to your frame.
Settings
Opens the Settings.
Power menu
Opens the Power menu
Hide photo
Hides the current photo. This means that the photo will no longer be shown in
the slideshow. If needed the photo can be shown again through the settings
menu.
Gallery
Opens a gallery which allows for easy and fast navigation through your photos.
Fit to frame/Fill frame
This toggles how the photo is shown.
The Fill frame
option is the default. The photo is scaled so that it fills the whole
screen. It will be centered around what is selected as the most important part.
See the first picture below.
7
Fit to frame will make sure that the entire photo is shown on the screen. See the
second picture below.
NB. Make sure to always use the power off button on the device or in the power
menu to turn Frameo off. Never disconnect power when Frameo is running.
Settings
Through the settings, you can personalize your frame to your needs.
Adjust photo
Allows you to adjust the position of the photo in the frame for an even
better fit. Here you can also use to rotate your photo.
Interacting with videos
When a video is shown two additional controls are shown. One for play/
pause of the video and one to control the volume level for video
sounds.
Press to start the video playback. Pressing will pause the video
playback.
Press to open the volume slider. Use the slider to adjust the volume level
for video sounds.
Pressing will mute the video while pressing will unmute the video.
Power menu
Tap the power icon to access the power menu. Here you can power off
using , restart your frame using or enter sleep mode using .
8
My frame
Frame name
Changes the name of your frame. This is also the name that connected friends and
family will see in their list of connected frames in the smartphone app.
Frame location
Changes the location of your frame. This is the location displayed on your friends'
and family's list of connected frames which can help to distinguish frames from each
other.
Set language
Sets the language used on the frame.
Set time zone
Sets the time zone used on the frame.
Enable/Disable 24-hour format
Enables, and disables, 24-hour time format.
Manage photos
In the manage photos menu you can see how many photos are on your frame and
the storage they use. You can also see the amount of storage left available on your
device for storing new photos.
Show/hide photos
Select which photos to hide by tapping them. Hidden photos will NOT be deleted from
your frame and you can always select them to be shown again.
Use to hide or show all photos.
Delete photos
Select photos that you want to permanently delete from your frame by tapping the
photo.
Use to select or deselect all and to permanently delete the selected photos.
9
Import photos
Allows you to import photos from an external storage (e.g. microSD card).
Before you try to import photos, make sure you have an external storage (e.g.
microSD card) inserted into your frame with the photos you wish to import.
Start by selecting the photos that you want to import onto your frame. Once selected
tap the import button to start the import process.
Use to select or deselect all photos on the external storage (e.g. microSD card).
Use to set the sort order of photos before import and to order by ascending/
It is currently not possible to add acaption or define the most important part of the
photo when using the import function. An alternative for this is to add yourself to your
friend list and send the photos using the app.
Export photos
Allows you to export photos from the frame to external storage (e.g. microSD card).
The export function will export all photos on the frame as well as profile pictures.
My Friends
This list contains all the connected friends that are allowed to send photos to your
frame.
Change options for afriend
Click the options icon to open the friend options menu. From here you can allow /
disallow if afriend may share the code to the frame. If this is enabled the friend can
retrieve and share the code to the frame from his/her app.
From the options menu you can also delete afriend, by pressing the DELETE FRIEND
button. This will remove the friend from the list and thereby remove their permission
to send photos to the frame. You will then be asked to confirm the removal and if you
would like to remove all photos previously received from this friend.
descending.
10
Add person
To allow anew person to send you photos, simply tap the add friend button
and share the presented code in whatever way you prefer.
Display
Brightness level
Adjust the brightness level of the screen.
Sleep mode
Frameo offers asleep mode which turns off the screen to reduce power
consumption. The default setting is to turn off the screen at 23:00 and turn on
the screen again at 07:00. To change this just set the sleep mode start/end time.
Your frame is not powered down or in standby, so you will still be able to
receive photos during sleep mode.
Slideshow
Timer
Set the duration that aphoto should be displayed before showing the next
photo.
Show caption
Sets whether or not to display the captions that your friends have sent with
the photo. Check to display captions. Uncheck to hide captions.
Fill frame
Sets the default frame photo setting. Check to set default to fill which makes
the photos fit the device screen according to the most important part of the
photo. Uncheck to make the photo fit inside the screen of the device, adding
blurred bars on the sides or top/bottom
Photo display order
Sets the order in which your photos are displayed on the frame.
●By date: Photos are shown newest to latest.
●Shuffle: Photos are shuffled and shown in arandom order.
11
Autoplay
Enables/disables autoplay of videos in the slideshow. Videos can always be
manually started regardless of this setting.
Video playback
Determines how videos should be played when autoplay is enabled.
● Loop videos: The video will loop until the slideshow timer is up.
●Play once: The video will play once and show it’s thumbnail until the timer is up.
●Play once and continue: The video will play once and continue to the next
photo, or video,once it completes.
Video volume
Adjust the volume level for video sounds on the frames.
Wi-Fi
Set which Wi-Fi the frame connects to. If you are connecting to anetwork with a
captive portal
Connection status will say that Wi-Fi login is required and show .Tap this to
open alogin screen where you can enter credentials to access the network.
Wi-Fi details
Use to show details about the current connected Wi-Fi.
Reset Wi-Fi
Use to delete all Wi-Fi information and restart your frame.
Notifications
Show notifications
Enables/disables whether notifications are shown in the slideshow (e.g. when a
new photo is received).
Notification volume
Adjust the volume level for notification sounds.
12
Storage space
Enables/disables notifications shown when frame storage is low.
Backup
Enables/disables notifications shown if automatic backup has failed.
Network connection
Enables/disables notifications showing network connection status.
New photos
Enables/disables notifications shown when receiving new photos.
New friends
Enables/disables notifications shown when new friends are added.
Software update
Enables/disables notifications shown when asoftware update has been installed.
Feature news
Enables/disables notifications shown when new exciting features are added.
Backup and Restore
Backup frame to external storage (e.g. microSD card)
Tap to make abackup of your photos, friends and settings. The time of
the latest successful backup is also displayed here.
Any existing backup on the external storage will be overridden!
Automatic backup
If checked, your frame will automatically take abackup within 30 hours of
receiving new photos or making changes to your frame.
13
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup is up-
to-date. This is done by confirming the date under “Backup frame to external storage
(e.g. microSD card)”. If e.g. the last backup is too old or if no backup is made, then
press the “Backup frame to external storage (e.g. microSD card)” button to make a
new backup.
NB: To keep both the old and the new frame operational at the same time after
restoring from backup, please make sure that both frames are updated to the
latest version beforehand.
If you wish to restore abackup on aframe that has already been setup, then you
must first reset the frame. This is done by pressing the “Reset frame” button. This
will delete all data on the Frameo and reset the Frameo to its setup screen.
On the setup screen you can select the “Restore from backup” button which
will restore your frame according to the backup.
If the “Restore from backup” button isn’t visible, then confirm that the
external storage (e.g. microSD card) is correctly mounted.
Reset frame
Removes all data from your frame.
This will permanently remove all your photos, friends/connections and settings.
Help
Open source libraries
Opens alist of open source libraries used in the app and their licenses.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously to improve the Frameo
software. We understand if you do not wish to share this data with us. Keep it
checked if you wish to help us improve Frameo. Set unchecked to deny the shar-
ing of anonymous analytics data.
Guide
Opens the quick start guide, that was shown when you first started the frame.
About
Android version
See what version of Android that is installed on the frame.
Peer ID
This is aunique ID for your photo frame. When contacting our support, please
provide this ID with your message.
MAC
Shows the MAC address of your frame.
Frameo version
Shows what version of the Frameo software is currently installed on your frame.
Up time
Shows how long the photo frame has been powered on.
Check for update
Check if an update is available for your frame.
Beta program
If checked the device will join the Beta program where it will receive updates more
frequently and before normal release devices.
14
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
thereceiver is connec-ted.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
For service assistance and product information, please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com
Product Specification
OS
Android
6.0
CPU
RAM Memory
512
MB
DDRIII
CPU Type: Rockchip 3126
Memory 8GB EMMC
Display
7" LCD 1
024X600 TN
Touch Panel 5 Point Capacitive touch screen
Wi-Fi 802.11 b/g/N
Picture format JPEG
& PNG
TM
Specifications are for reference
Video format MP4(within 15 seconds)
16
To make a warranty claim, do not return this product to the store. Please
email support@curtiscs.com or call 1-800-968-9853.
90 day Year Warranty
This product is warranted to be free from defects in material and workmanship for
a period of ninety (90) days from the date of original purchase. During this period,
your exclusive remedy is repair or replacement of this product or component found to
be defective, at our option; however, you are responsible for all costs associated
with returning the product to us. If the product or component is no longer available,
we will replace with a similar one of equal or greater value. Prior to a replacement
being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conform-
ity with the printed directions., or damage to the product resulting from accident, altera-
tion, abuse, or misuse. This warranty extends only to the original consumer purchaser
or gift recipient. Keep the original sales receipt, as proof of purchase is required to
make a warranty claim. This warranty is void if the product is used for other than
single-family household use or subjected to any voltage and waveform other than as
on the specified rating on the label (e.g., 120V~60Hz).
We exclude all claims for special, incidental, and consequential damages caused
by breach of express or implied warranty. All liability is limited to the amount of
the purchase price. Every implied warranty, including any statutory warranty or condition of
merchantability or fitness for a particular purpose, is disclaimed except to the extent prohib-
ited by law, in which case such warranty or condition is limited to the duration of this written
warranty. This warranty gives you specific legal rights. You may have other legal rights
that vary depending on where you live. Some states or provinces do not allow lim-
itations on implied warranties or special, incidental, or consequential damages, so the
foregoing limitations may not apply to you.
For faster service, locate the model, type, and serial numbers on your appliance.
17
Table of contents
