SYMA X800W User manual

User manual
FOLDING DRONE
X800W
8

DE
Contents
1-22
EN ENGLISHINTRODUCE
23-46
DEUTSCH EINFÜHRUNG

Contents
1.0 Important safety information
2.0 About this product
2.1 Specifications
2.2 Install the SYMA FLY app
2.3 Drone components
2.4 Remote control components
3.0 Assembling the product
3.1 Installing the propeller protectors
3.2 Charging the drone battery
4.0 Flight guide
4.1 Flight preparation and turning the drone on/off
4.2 The method of Remote control flight controlling
4.3 Stunt functions
4.4 Trimming
5.0 Function introduction
6.0 Real-time transmission function
8.0 Contact Us
7.0 Accessories (available separately)
2
3
8
11
17
3
3
4
4
5
6
8
9
10
11
15
16
5
1
EN

1.0 Important safety information
Safety Guide
Repair and maintenance
Thank you for purchasing this SYMA product. To ensure that you operate the aircraft correctly and
conveniently, please read these instructions carefully before first use and store them in a safe place for
future reference.
1.Adult or experienced RC pilot’s supervision is recommended for children.
2.Rechargeable batteries are to be removed from the toy before being charged.
3.Batteries are to be inserted with the correct polarity.
4.Rechargeable batteries are only to be charged under adult supervision.
5.Non-rechargeable batteries should not be recharged; Batteries should be inserted with a correct
polarity; Different types of batteries, new or used batteries should not be mixing.
6.Turn off the drone/transmitter and remove the batteries when not in use.
7.The supply terminals are not be short-circuited.
8.Keep away from the rotating blades (rotating blades may cause bodily injuries, or damage to
property).
9.Attention：please assemble the drone with the guidance of adults.
10.Do not look directly into the LED lights of the drone as it can damage your eyes.
11.Exhausted batteries are to be removed from the aircraft.
12.Please store the smaller-sized drone accessories in places that are out of reach of children.
13.This drone is very powerful. For all first-time flights, the left joystick must be slowly pushed up in
order to prevent the drone from ascending too fast to avoid unnecessary collision and possible
damage and injury.
14.When the flight is ended, first turn off the power of the remote control. Then turn off the power of
the drone.
15.Avoid placing the batteries in places with high temperatures and exposure to heat.
16.Please keep a safe distance from the spinning propellers to avoid injury.
17.To ensure the electromagnetic environment requirement of the aviation radio (station), using
remote controls in the zone, which is in a radius of about 5000m zone from the circle center of the
airport runway, is forbidden. All users also should abide by the regulation of the radio set forth by
government and regulatory agencies including the duration and area.
18.Pay attention to keeping distance of 2-3 meters from the user or other people when the drone is
flying, avoid the drone landin to hit the head, face or face or body of anoter person.
19.Attention：Drone assembly under adult supervision.
20.The packing has to be kept since it contains important information.
1.Use clean and soft cloth to clean the product.
2.Keep away the product from heat sources.
3.Avoid water exposure to this product. Moisture may cause damages of drone electronic parts.
4.Transformers used with the drone should be examined regularly, such as propel blade, motor,
battery and other parts. In case of any damages is found, please stop using it unless it is repaired or
replaced.
2
EN

2.0 About this product
2.1 Specifications
Aircraft
Aircraft weight Approx. 62g
Aircraft Size 305x305x55 mm
Brand Name SYMA
Model/ITEM NO. X800W
Range Approx. 30 m
Altitude Approx. 10 m
Flight time Approx. 12 mins
Motor ø6
Battery 3.7V 400mAh
Charging time Approx. 60 minutes
Remote control
Operating frequency 2.4 GHz
Operating temperature 0℃ to 40℃
Package contents
Aircraft 1
Remote control 1
USB charging cable 1
Propeller 4 (A/B)
Propeller protection frame 2
User manual 1
Phone holder 1
2.2 Install the SYMA Fly app
Scan the QR code with your mobile device or download the app from your app store.
AndroidiOS
*For best results, use a device with iOS 8.0/Android 5.0 or later.
Note:
3
EN

2.4 Remote control
2.3 Drone components
① Propeller protection frame
② Motor
③ Power switch
④ Propellers
⑤ Lens
⑥ Battery cover
⑦ Rear indicator
⑧ Front indicator
①
②
③
④
⑤
⑥⑦
① Power switch
② Left joystick
(press and hold for trimming
adjustments and release
when finished)
③ Phone holder
④ Right joystick
(short press to toggle between
high and low speed mode)
⑤ 3D flip button
⑥ One-touch take-off/landing button
⑦ Spin button
①
②
③
④
⑧
⑤
⑥
⑦
4
EN

3.1 Installing the propellers
3.0 Assembling the product
Note:
!
* The propellers are labelled “A/B”. Ensure that each propeller is inserted in the corresponding
position on the arms, and then tighten the screw.and then tighten the screws and attach the propeller
covers.
Folding the quadcopter
3
4
2
2
3
4
1
1
1. Unfold the arms in the direction of the arrow
Insert the protective frame into the fuselage in the direction of the arrow, and fasten the screws.
Remove the propeller covers and
screws in the direction of the arrow
Insert the propellers onto the body of the
quadcopter in the direction of the arrow
2. Fold the arms in the direction of the arrow
until the quadcopter is fully folded.
Detaching the propellers Re-installing the propellers
1
1
3
3
2
2
5
EN

Remove the battery
Attaching the phone holder
Insert the battery
Charge the battery
3.2 Charging the drone battery
1
2
Push the battery cover back, then flip it
up to remove the battery
Insert the battery and close the battery
compartment cover.
Note:
*Charge the drone with the USB charging cable that came with the product.
* Using adapters with a lower rated current will result in a longer charging time.
Insert the phone
holder
into the opening
on the remote
control.
Press the spring to
adjust the size of
the phone holder.
12
5V1A adapterUSB charging cable
Battery
USB
1 2 3
Red indicator is constant:
battery is charging.
Red indicator is off:
battery is fully charged.
*Ensure that the battery holder clicks into place.
6
EN

Inserting the remote control batteries
Note:
!
* When installing the batteries, ensure that you match the + and ‒ ends of the battery with the + and ‒
signs on the controller.
* During the battery installation, it must be ensured that the polarities of the batteries are matched
with that of the battery box. No battery shall be installed with the opposite polarity.
* Please do not use new and old batteries together.
* Please do not use different types of batteries together.
* Remote control do not use rechargeable batteries.
* Exhausted batteries are to be removed from the Remote control.
To insert the controller batteries, open the battery cover on the back of the remote control and insert
4x AA alkaline batteries, ensuring that you observe the polarity markings (batteries are not included
and must be purchased separately).
Note:
!
*Do not short circuit or compress the battery, as this may cause an explosion.
*Rechargeable batteries should be removed from the aircraft before charging
*Failure to follow all the instructions may result in serious injury, irreparable damage to the battery and may cause a fire,
smoke or explosion
*Always check the batterys condition before charging or using it
*Replace the battery if it has been dropped, or in case of an odor overheating, discolouration, deformation or leakage
*Use only the supplied charging cable.
*Exhausted batteries should be removed from the aircraft
*The battery temperature must never exceed 60℃(140°F), otherwise the battery could be damaged or ignite.
* Never charge on a flammable surface , near flammable products or inside a vehicle ( Preferably place the battery in an
on-flammable and nonconductive container ).
* Never leave the battery unattended during the charging process . Never disassemble or modify the housing's wiring，or
puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery . Do not short
circuit the batteries .
* Never expose the battery to moisture or direct sunlight, or store it in a place where temperatures could Exceed 60℃(drone
in the sun，for example)
* Improper battery use may result in a fire, explosion or other hazard.
Battery cover
4x AA batteries
7
EN

Pairing the remote control with the drone
4.0 Flight guide
4.1 Flight preparation and turning the drone on/off
Remote control indicator flashes rapidly The indicator will stay constant when pairing is complete.
Turning the drone on
Move the left joystick upwards Pull the joysticks in a V shape Press the ascend/descend button
Switch on the remote control
Indicator flashes rapidly≥
slowly
Note:
!
*After you switch on the remote control, the indicator will flash quickly to indicate that the remote
control is waiting to be paired with the drone.
Note:
!
1. If the aircraft is flown out of range from the remote control, the aircraft indicator light will start to
flash and the aircraft will land slowly.
2. If the remote control suddenly turns off or runs out of power during flight, the aircraft will
automatically land and come to a stop. If the remote control is turned back on during this process,
you will be able to control the aircraft again.
Method one Method two Method three
2
3
4
1
8
EN

Method one Method two Method three
Turning the drone off
4.2 The method of Remote control flight controlling
Ascend
Descend
Reverse
Move forwards
Rotate right Front Rotate left
Rear
Push to the bottom for 2-3 seconds Pull the joysticks in a V shape Press the ascend/descend button
9
EN

Tilt left Tilt right
Front
Rear
4.3 Stunt functions
Press the spin button
Press the spin button
Press the spin button on the top-left of the remote control while holding the right joystick to the left or
right. The drone will spin to the left or right accordingly.
Press the spin button on the top-left of the remote control and move the right joystick to the top or
bottom. The drone will spin in circles and ascend for approximately 60-90cm.
Maximum radio-frequency power transmitted < 10 dBm. Frequency range:2409-2475MHZ
Rotate right
Rotate left
Rotate right
Ascend
Rotate left
10
EN

4.4 Trimming
5.0 Function introduction
Trimming forwards and backwards
Undervoltage
Trimming left and right
If the aircraft drifts forwards or backwards when it is hovering, hold the left joystick down and push the
right joystick down/up until the aircraft stops drifting.
If the aircraft drifts to the left or right when it is hovering, hold the left joystick down and push the right
joystick right/left until the aircraft stops drifting.
A flashing red indicator light on the base of the aircraft indicates that the battery
level is low. When this occurs, bring the aircraft back to land.
Undervoltage protection
If the aircraft’s blades collide with another object or become stuck,the aircraft’s
circuit will engage the overcurrent protection mechanism.
Overcurrent protection
This toy is only to be connected to equipment bearing either of the following symbols:
11
EN

Level calibration
Briefly press the right joystick to switch between high and low speed mode.
High/low speed mode
1. Low speed mode is enabled by default when the drone is switched on.
2. The remote control beeps twice when high speed mode is enabled and once when low
speed mode is enabled.
Place the aircraft on a level surface and move the left and right joysticks to the lower right
corner for approximately 3 seconds. The indicator will flash rapidly and then stay constant
to indicate that the calibration process is complete.
12
EN

One - Key take-off/landing
Atmospheric pressure positioning
Once you have mastered the basic controls, you can try performing some flip manouevres.
Start by flying the drone to an altitude of at least 3 m. Then hold down the button on the
top-right corner of the remote control (flip button) and push the right joystick all the way
up/down/left/right to flip the aircraft forward/backwards/left/right.
When you release the left joystick (throttle) afterascending/descending, the drone will
continue to hover at the current height.
3m
1. When the aircraft is in standby, press the take-off button to make the aircraft take off
automatically and hover at a height of1.5 m.
2. When the drone is in the air, press the one-touch take-off/landing button to make the
aircraft land automatically.
13
EN

Headless mode
Define the positive direction function correction:
1. Define the front
2. Start headless function
When the aircraft is powered on for the first time, the direction of
the aircraft nose is straight ahead.
After the linking is completed, press and hold the right joystick (about 2S), the remote
controller will emit a "dididi,,," sound, and the indicator light on the aircraft will flash slowly,
indicating that it has entered the headless state; press and hold the right joystick again
(about 2S), When you hear a long beep, you will exit the headless state to the headless state,
the controller does not need to identlfy the position of the aircraft’s nose. but to control the
aircraft according to the direction of the joystick of the remote control.
When the aircraft collides with a headless state, if you find that the fixed head direction is
deviated, you only need to re-orient the aircraft and move the left and right joysticks of the
remote control to the lower left at the same time. When the indicator on the aircraft flashes
slowly 3 A long light after a second indicates that the calibration is complete.
14
EN

1.Download and install the app.
If you have an Android device, download the SYMA FLY app from the Syma website
(www.symatoys.net), or scan the QR code shown.
If you have an iOS device, download the Syma Fly app from the Apple App Store, or scan the
QR code shown.
2. SYMA FLY App Connection operation
6.0 Real-time transmission function
Note:
* The QR code is printed on the packaging and on the back cover of the user manual. Visit the Syma
website or your app store to download the latest version of the Syma Fly app.
15
EN
① Install the SMYA FLY app on your phone. Note: Scan the OR code with your mobile device
or download it from the app store.
② First pair the drone with the remote control, then turn on the Wifi Settings of the mobile
device and select FPV_WIFI_**** from the Wifi list.
③ Wait a few seconds until your smartphone connects to the drone’s Wifi network.
④ Open the Syma fly application, select the corresponding model, and then click Start, the
camera image will be displayed on the screen, indicating that the connection is successful.

7.0 Accessories (available separately)
Drone body Propeller protection
frame
Arm Box
Propeller blades Motor A Motor B
Receiver board USB cable
Camera circuit boardPhone holder
Battery
Remote control
The following section contains a list of optional accessories that are available to purchase.
Accessories can be purchased from your local retailer. Please indicate your preferred colour
when making your purchase.
Propeller decorations
Lights
16
EN

Problem
The drone does
not respond
1. The drone has entered into low-voltage
protection.
2. When the power of the remote control
is weak, the power light indicator will
blink.
1. Charge upo the drone.
2. Change the batteries of
the remote control.
The flight response of the
drone is not sensitive
1. The power of the remote control is
weak.
2. There is an interference with the same
frequency as that of the remote control.
1. Change the batteries.
2. Change to a place where there
is no interference with the
same frequency.
Fixed high instability / up
and down movement
1. The drone is not calibrated level to
the ground.
2. Unstable air pressure under the severe
weather condition.
3. Violent collision resulting in data disorder
of gyroscope.
The drone is flying towards
its side in one direction
during hovering
1. The drone is not calibrated level to
the ground.
1. Re-adjust the calibration until
the drone is level to the ground.
For further details.
1. Re-adjust the calibration until
the drone is level to the ground.
For further details.
2. Avoid to fly under the severe
weather condition.
3. Make level adjustment again.
In the headless state, it is
biased towards the front
direction
1. Many collisions may cause head drift. 1. Re-define the front direction.
For further details.
Reason Solution
Rectification Procedures
Please do not hesitate to contact us if you need more
further support.
[email protected]
[phone](US) [phone](UK)
[phone](DE)
8.0 Contact Us
For online support, please scan this
code with Facebook Messenger
17
EN