Symbol MC70 User manual

SYMBOL MC70 HAND HELD TERMINAL
USER MANUAL
CORPORATE VERSION
FEBRUARY 2007

SUPERVALU INC v1.0 2 02/05/07
TABLE OF CONTENTS
Welcome..................................................................................... 3
Getting Started........................................................................... 3
Equipment Setup ................................................................................... 3
Battery Installation................................................................................. 3
About the Stylus .................................................................................... 5
Aligning the Screen ................................................................................ 6
Configure Time Zones & Clock.................................................................. 7
Overview of Home Screen........................................................... 10
Appendix – Overview of Hand Held............................................. 11
Overview of MC70.........................................................................11
Adjusting Volume…………………………………………………………………………………….. 11
Appendix – Battery 101 (IMPORTANT INFO).............................. 12
MC70..........................................................................................12
Charging the Main Battery and Memory Backup Battery..................... 12
Properly Replacing the Battery (VERY IMPORTANT!) .......................... 12
About your Battery Charger and Charging Batteries...........................14
MC70 ......................................................................................... 14
Appendix – Rebooting The Hand Held (MC70) ............................ 15
Appendix – Keypad (MC70) ........................................................ 16
Support ...................................................................................... 19
Need Help?..................................................................................19
Need Accessories? ........................................................................19

WELCOME
Welcome to the next generation of hand held computing. Hand held computing has never been so
easy and colorful! Please be sure to read through this manual in its entirety so you can
understand how to get your store up and running quickly.
GETTING STARTED
Equipment Setup
1. Unpack all equipment and lay each piece out on the workspace. You will need one electrical
outlet for plugging the equipment in.
It’s highly recommended that you save all packaging material and boxes in the
event of a failure.
a. Hooking up the equipment
i. Attach the power supply cables and plug into an electrical outlet
ii. Place the spare battery in the charging cradle. Verify that the light is flashing
red. The battery usually fully charges in less than four hours. Please refer to the
battery section of this manual for more specifics.
Battery Installation
MC70 Hand Held
2. Open the back cover of the MC70 by flipping out the metal wing-tabs on both sides of the
battery cover.
3. Before using the MC70 hand held, install a lithium-ion battery by sliding the battery into
the unit as shown and close the metal wing-tabs.
If the wing-tabs are closed completely, the battery cover should not have
uneven gaps between the battery cover and the back of the MC70 and it should
not move. Ensure the battery is fully inserted. An audible click can be heard as
the battery is fully inserted. A partially inserted battery may result in
unintentional data loss.
SUPERVALU INC v1.0 3 02/05/07

GETTING STARTED
4. When a battery is fully inserted in either hand held for the first time, the device boots and
powers on automatically.
The main battery can be charged before or after it is installed. Use one of the spare
battery chargers to charge the main battery (out of the hand held), or one of the
cradles to charge the main battery installed in the hand held.
See the appendix for detailed battery information.
SUPERVALU INC v1.0 4 02/05/07
It’s very important that you reference the section “Properly
Replacing the Battery” sections on page 12. Please take a
second to review this information before continuing with the
“Getting Started” instructions.
5. When the hand held is powered on for the first time, it initializes its system. The Symbol
splash screen appears for a short period of time followed by the Windows Mobile®
Powered by Direct Push Technology window.

GETTING STARTED
About the Stylus
6. Next, tap the screen to set up your Pocket PC using your stylus.
MC70
New stylus – Double-tipped and spring-loaded!
Use the hand held stylus for selecting items and entering information. The stylus functions
as a mouse. Locate the stylus near the antenna and pull to remove the stylus. It should
remain attached to the MC7o by a flexible lanyard.
Tap - Touch the screen once with the stylus to press option buttons and open menu items.
Tap and Hold - Tap and hold the stylus on an item to see a list of actions available for
that item. On the pop-up menu that appears, tap the action you want to perform.
Drag - Hold the stylus on the screen and drag across the screen to select text and images.
Drag in a list to select multiple items.
Symbol recommends using the spring-loaded tip of the stylus to write on the
screen, and the back end of the stylus to tap the screen. Use your finger to press
the Power and keypad buttons.
SUPERVALU INC v1.0 5 02/05/07
Do NOT use a pen, pencil or other sharp object to tap the
screen! Doing so will ruin the unit. See the Appendix for
information on ordering a replacement stylus.

GETTING STARTED,CONT.
Aligning the Screen
6. The unit will automatically route to the align screen. Using the stylus, carefully press and
briefly hold the tip of stylus on the center of each target that appears on the screen.
It’s important when you first receive your new hand held to calibrate the screen. This will
ensure that the cursor on the touch screen aligns properly with the tip of the stylus.
To re-calibrate the screen at anytime for the MC70, press FUNC (blue button) +
Esc on the mobile computer to launch the calibration screen application.
SUPERVALU INC v1.0 6 02/05/07

GETTING STARTED
Configure Time Zones and Clock
7. The time zone for your hand held must be designated when you first receive the hand held
and after each boot.
a. Using your stylus, choose the time zone that you are in from the drop down menu.
The default is GMT – 8 Pacific US.
b. VERY IMPORTANT – if you change the time zone from what first displays,
you will also need to change the time.
c. Click Next when finished.
d. The system will begin to install various files on the system – please refrain
from using the hand held. You will see a window pop up that shows the
installation of program”. Installation should take approximately 2 – 4
minutes. The Home Screen will appear on the screen when finished.
SUPERVALU INC v1.0 7 02/05/07

e. It’s a good habit to verify that the date and time are correct. If the time is not
correct, click on “Symbol Browser”, then “Maintenance Menu” and then “Set Date
and Time”.
f. Go to the Home section of the Clock window and verify the date and time.
If the date and/or time is incorrect:
i. Using the drop down menu, choose the proper GMT time zone for your
area (i.e. GMT – 6 Central US).
ii. Go to the hour in the time section and click on it with your stylus (will be
highlighted in blue). To change the hour, use the up and down arrow keys to
the right of the field OR you can enter the time with using the keypad.
SUPERVALU INC v1.0 8 02/05/07

SUPERVALU INC v1.0 9 02/05/07
iii. Repeat previous step for the minutes, seconds and AM/PM.
iv. Go to the date field. Click on the drop down menu to bring up the calendar.
Use the left or right arrow buttons on the display screen to navigate to the
correct month. Choose a date with your stylus.
GETTING STARTED
g. Click OK when finished.
h. If needed, select Yes from the Settings dialog box stating “Save changes to the
clock settings?”
i. Users will then be returned to the Home screen for the Hand Held.

OVERVIEW OF HOME SCREEN
Below is a screen shot of your Home screen for the Hand Held. This will be the same for the MC70
as for the MC9000 and PPT8800. Let’s take a moment to review the details and functionality.
Allows hand held users to
connect to remote systems
for terminal emulation. This is
primarily used for DSD
Receiving.
About displays the AppCenter software
version. Central Support may ask you to check
the version when trouble-shooting incidents.
Allows hand held users to
add, subtract, multiply and
divide calculations.
Starts the Mobile Retail
Manager (MRM) application.
Routes users to the
SUPERVALU Retail Handheld
Local Menu.
This is currently being using
for the EA Tag Subscription
application at Shoppers and
Sentry.
Users should refer to the
Symbol EA Hand Held
Quick Cards for the EA
Tag Subscription detail.
Starts the SweepTrax
application.
This is your IP address for the Hand Held.
An IP of 0.0.0.0 indicates that you are not
connected to the wireless network. Dis
p
la
y
s the time.
Pop-up Keyboard
(SIP keyboard)
Controls the volume of the
speaker and scanner. This
section was covered under
the topic Getting Started.
Dis
p
la
y
s the batter
y
level.
Displays the status of the signal strength,
address and connection speed.
A “X” (instead of bars) indicates that
you are not connected to the wireless
network.
This section will be covered in further in the
manual.
Starts the eOrder application.
Users should refer to the
eOrder User Manual for
details on the application.
SUPERVALU INC v1.0 10 02/05/07

APPENDIX –OVERVIEW OF HAND HELD
Overview of MC70 Hand Held
Adjust Volume
Click on the speaker icon, and adjust the volume bar.
SUPERVALU INC v1.0 11 02/05/07

APPENDIX –BATTERY 101 (IMPORTANT INFO)
Charging the Main Battery and Memory Backup Battery
MC70 Hand Held
Before using the hand held for the first time, charge the main battery until the amber charge
indicator light remains lit (refer to Overview of MC70 Hand Held section for location.) Charge
time is less than four hours.
The hand held is equipped with a memory backup battery, which automatically charges from the
fully charged main battery. When the hand held is used for the first time, the backup battery
requires approximately 15 hours to fully charge. The backup battery retains data in memory for
at least 30 minutes when the mobile computer's main battery is removed.
When the hand held reaches a very low battery state, the combination of main battery and
backup battery retains data in memory for at least 72 hours.
Do not remove the main battery within the first 15 hours of use.
If the main battery is removed before the backup battery is fully charged, data may be
lost!
Properly Replacing the Battery for MC70 (**VERY IMPORTANT!**)
Symbol highly suggests that the next steps be followed to avoid mysterious cold boots of the
MC70 hand held.
1. Prior to removing the battery, press the red Power button to turn off the screen.
This sets the mobile computer to suspend mode.
2. Simultaneously press both primary battery releases. The battery partially ejects
from the mobile computer.
3. Pause 3-4 seconds while the mobile computer performs battery
removal shutdown.
4. Press the secondary battery release, on top of the battery, and slide the battery
out of the mobile computer.
5. Slide replacement battery into the mobile computer. Press the red Power button
to turn on the screen.
SUPERVALU INC v1.0 12 02/05/07

APPENDIX –BATTERY 101 (IMPORTANT INFO), CONT.
About your MC70 Single Slot USB Cradle & Charging Spare Batteries
This section describes how to set up and use the MC70 Single Slot USB Cradle Battery
Charger to charge MC70 spare batteries.
SUPERVALU INC v1.0 13 02/05/07
To Charge an MC70 Spare Battery
1. Ensure the accessory used to charge the
spare battery is connected to the appropriate
power source.
2. Insert the spare battery into the accessory’s
spare battery charging slot with the charging
contacts facing down (over the charging pins)
and gently press down on the battery to
ensure proper contact.
3. The battery starts to charge automatically.
The amber charge LED on the accessory glows
to show the charge status. The battery usually
fully charges in less than four hours.
= LED Indicator Location
Slow Flash = Normal Charge
Solid Amber = Full Charge
Fast Flash = Charging Error

APPENDIX –BATTERY 101 (IMPORTANT INFO), CONT.
About your MC70 Single Slot USB Cradle & Charging an MC70
This section describes how to set up and use the Single Slot Serial Charger/USB Cable to
charge your MC70 battery and hand held.
SUPERVALU INC v1.0 14 02/05/07
= LED Indicator Location
Slow Flash = Normal Charge
Solid Amber = Full Charge
Fast Flash = Charging Error
To Charge an MC70
1. Ensure the cradle used to charge MC70 is
connected to the appropriate power source.
2. Insert the MC70 into the cradle charging
slot with the charging contacts facing down
(over the charging pins) and gently press
down on the MC70 to ensure proper contact.
3. The battery starts to charge automatically.
The amber charge LED on the MC70 will turn
on to indicate “charging” status. The battery
usually fully charges in less than four hours.
Setup

Appendix – Rebooting The MC70 Hand Held
Every so often it may be necessary to reboot your MC70 hand held.
There are two reset functions, warm boot and cold boot.
A warm boot restarts the handheld and closes all running programs.
A cold boot also restart the hand held and closes all running programs but also resets
the Real-Time-Clock.
Data saved in memory is not lost. Perform a warm boot first. This restarts the hand held and
saves all stored records and entries. If the hand held still does not respond, perform a cold boot.
Performing a Warm Boot on the MC70
Hold down the Power button for approximately five seconds. As soon as the hand held starts to
perform a warm boot release the Power button.
Performing a Cold Boot on the MC70
A cold boot restarts the hand held. The operating system and all applications are restarted. File
storage is preserved. Only perform a cold boot if a warm boot does not solve the problem.
SUPERVALU INC v1.0 15 02/05/07
Never perform a cold boot unless a warm boot does not solve the problem.
1. Press and hold the “1” key and the “9” key simultaneously and then press the red power
button until the MC70 begins the cold boot.
2. As the hand held initializes its system, the Windows Mobile splash window appears for about
30 seconds.
3. Calibrate the screen and set the time zone.

APPENDIX –MC70 KEYPAD
About your QWERTY Keypad
The QWERTY keypad produces the 26-character alphabet (A-Z, both lowercase and uppercase),
numbers (0-9), and assorted characters. The keypad is color-coded to indicate which modifier
key to press to produce a particular character or action. The keypad default is alphabetic,
producing lowercase letters.
SUPERVALU INC v1.0 16 02/05/07

APPENDIX –MC70 KEYPAD –CONT.
SUPERVALU INC v1.0 17 02/05/07

APPENDIX –MC70 KEYPAD,CONT.
SUPPORT
Need Support?
If you experience any issues regarding your hand held, please call Central Support at 1-800-426-
8845. Choose option 1 Retail store, choose option 2 SVHarbor, choose 4 for all other requests.
Need Accessories?
Retailers should contact their regional Retail Technology department.
SUPERVALU INC v1.0 18 02/05/07