Symmons Allura Trim 4703-TRM User manual

Model Numbers Specification
Options/Modifications
Tub/shower trim with hand shower and lever handle
includes wall connection, cradle for hand shower
mounting, in-line vacuum breaker, exible metal hose,
non-diverter tub spout, 3 mode hand shower and 3
mode showerhead with standard 2.5 gpm (9.5 L/min)
ow restrictor. Shower trim with hand shower and lever
handle includes all of the above less non-diverter tub
spout. Valve trim with hand shower and lever handle
includes all of the above less non-diverter tub spout and
3 mode showerhead. Components made from metal
and nonmetallic materials plated in standard polished
chrome nish.
Allura®Trim Series
Operation & Maintenance Manual
4703-TRM, 4705-TRM, 4706-TRM
4703-TRM
Valve Trim with Hand Shower
Compliance
-1.5
1.5 gpm (5.7 L/min) flow restrictor
-2.0
2.0 gpm (7.6 L/min) flow restrictor
-LAM
Metal finish insert handle
-LR
Lever handle
4705-TRM
Shower Trim with Hand Shower
Note: Append appropriate -sufx to model number.
-STN
Satin Nickel finish
-ASME A112.18.1; CSA B125.1
4706-TRM
Tub/Shower Trim with Hand Shower
-H323-V
30” slide bar in place of wall cradle on hand
shower units
-SS
Slip spout on any tub and shower unit
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.

2
Dimensions
Notes:
1) All dimensions measured from nominal rough-in (see R as reference).
2) Dimensions subject to change without notice.
Measurements
A Ø 2 1/2”, 64 mm
B 6 3/4”, 172 mm
C 2 1/8”, 54 mm
D
Male 1/2” NPT thread must
be recessed 1/4” from
nished wall
E 6”, 152 mm right or left
F Ref. 77”, 1956 mm
G Ø 7”, 178 mm
H Ø 5”, 127 mm
I 10”, 254 mm
J 4 3/4”, 121 mm
K 2 1/2”, 64 mm
L
Ref. 32”, 813 mm
(4706-TRM)
Ref. 42”, 1067 mm
(4703-TRM, 4705-TRM)
M 12”, 305 mm
N 3 1/8”, 79 mm
O 4 1/8”, 105 mm
P 1/2” NPT
Q 4”, 102 mm
RRough-in
2 3/8” ± 1/2”, 60 mm ± 13 mm
S 5 1/2”, 140 mm
A
C
C
H
H
G
G
K
K
L
L
M
M
F
F
B
B
D
D
J
J
I
I
N
NO
O
R
R
S
S
Q
Q
P
P
E
E
Floor
Floor

3
Parts Breakdown
Replacement Parts
Item Description Part Number
AIn-line Vacuum
Breaker EF-109
B Wall Elbow EF-105
C Showerhead 4-143
DShower Arm
(ange included) 300S
E Flange 430SS
F
G
H
I
Plug Button
Handle Screw
Star Washer
Handle
RTS-026
J Dome Cover T-19
K*
L
M
Diverter Escutcheon
Mounting Screws
Mounting Plate
T-416A
N
O
P
Wall Cradle
Cradle Hardware
Cradle Mount
EF-106
Q
R
Diverter Dome Cover
Lock Nut T-19/20-PL
S
L
T*
Dial
Mounting Screws
Shower Escutcheon
T-133C
U Hand Shower HS-143
V Tub Spout 060
W5” Hose with
Vaccum Breaker EF-104
Tools Required for Installation
Adjustable
wrench
Allen wrench
(3/16”)
Phillips head
screwdriver
Plumber tape
Silicone
*Note: Apply a bead of silicone around the perimeter of the escutcheons
after installing trim ush with wall. Leave opening on bottom of
escutcheon for weep hole.
DE
U
S
A
B
R
F
L
V
W
M
L
O
N
P
T
C
K
I
G
H
J
Q
F
I
G
H
Notes:
1) Append -STN to part number for Satin Nickel nish.
2) Append -1.5 or -2.0 to showerhead or hand
shower for low ow.

4
Installation
Note:
For valve body installation, please
see valve body manuals.
1) Install shower escutcheon (T) to
shower valve (4000-BODY). Secure
with two screws (L). Snap dial (S)
into shower escutcheon.
Note: Logo on dial should be in the
6 o'clock position.
2) Attach mounting plate (M) to
diverter valve (4705-TRM and
4706-TRM only). Secure with two
screws (L) .
3) Attach diverter escutcheon (K) to
plastic mounting plate (M).
Note: Tabs should snap into place.
4) Install diverter dome cover (R)
to diverter valve and secure with
lock nut (Q).
5) Install shower dome cover (J)
to shower valve by turning clock-
wise
6) Install diverter handle (4705-TRM
and 4706-TRM only) and shower
handle (I) to valves. Secure han-
dle(s) with star washer (H) and
screw (G). Attach plug
button (F) to handle(s).
Notes: Handles should be facing
the 6 o'clock position.
7) Install tub spout (V) to pipe tting.
Turn clockwise to secure.
1
3
2
L
T
S
1
2
M
L
K
M
1
2
K
R
Q
1
2
T
J
1
1
3
2
G
H
I
G
H
I
F
1
2
V

5
Installation
8) Install wall elbow (B) to pipe tting.
Tighten set screw to secure.
9) Place cradle mount (P) in position,
mark and drill 1/8" pilot holes into
stud.
Option: Place cradle mount (P) in
position, mark and drill 3/16" holes
into wall. Install anchors.
10) Remove cover of wall cradle
(N). Install cradle mount (P) .
Secure with three screws (O) .
Replace cover on hand shower
cradle.
11) Attach shower arm (D) and ange
(E) to vertical shower pipe turning
clockwise to tighten.
12) Install showerhead (C) to show-
er arm (D) turning clockwise to
tighten.
13) Attach large end of hand show-
er hose (W) to hand shower (U).
Connect in-line vacuum breaker
to wall elbow (B). Turn clock-
wise to tighten.
1
2
B
1
2
P
4
3
P
O
N
2
1
3
1
4
2
W
U
A
W
B
1
2
C
D
1
2
D
E
1
3
2
P

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
©2015 Symmons Industries, Inc. ■www.symmons.com ■[email protected] ■ZV-3061 REV B ■ 020315
1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.
2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.
3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.
1) Diverter handle facing straight down is for diverter
function 1.
2) 4705-TRM: Turn diverter handle counterclockwise one
full revolution for diverter function 2.
4706-TRM: Turn diverter handle counterclockwise 1/4
turn for diverter function 2.
3) 4706-TRM: Turn diverter handle counterclockwise 3/4
turn for diverter function 3.
4705-TRM 4706-TRM
Temperature Control Diverter Control
Operation & Maintenance
Troubleshooting Chart
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.