Symmons Allura SRT-4770 Quick guide

Quick Install Guide Allura Roman Tub Faucet, SRT-4770
Step 8
Flush water supply lines
Step 7
Attach water spout
Step 5
Attach handles
Step 4
Attach valve assembly
Step 6
Connect water supply lines
and check for leaks
Step 2
Solder valve assembly together
Step 1
Cut copper tubing to length
nished deck
Step 3
Mount valve assembly
SRT-4770.............. Chrome finish
SRT-4770-STN ..... Satin Nickel finish
1/8"
1 2 3 4
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects,
or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Roman Tub Faucet SRT-4770
Installation and Service Instructions
Allura®
Model Numbers Tools & Materials Need Help?
Symmons customer service:
Phone: [phone]
Email: [email protected]
Monday - Friday 7:30 am - 6:00 pm EST
www.symmons.com/service

Compliance
ASME A112.18.1/CSA B125.1

Step 1 Cut copper tubing to length
Step 2 Solder valve assembly together
Length = (d) minus 2-1/4 inches (57 mm) divided by 2.
Example:
-
If center to center distance (d) is 14 inches.
-
14 inches minus 2-1/4 inches = 11-3/4 inches.
-
11-3/4 inches divided by 2 = 5-7/8 inches.
-
Cut 2 copper tubes into 5-7/8 inch lengths.
* Maximum distance (d) with supplied
copper tubing is 18-1/4 inches (463 mm)
center to center distance (d)*
1/2" (12.7 mm) copper tubing
Ensure valves are
parallel aligned
when soldering.
Step 3 Mount valve assembly to deck
Step 4 Attach valve assembly
Step 5 Attach faucet handles
red
(hot)
blue (cold)
nished deck
front view
nished deck
front view
1-7/8"
47 mm
OFF = CCW
OFF = CW
nished deck
front view
Caution: If replacing an older faucet ensure water supply is
turned OFF before removing and then turn faucet handles ON
to relieve water pressure.
Installation Instructions
Page 2

Step 6 Fasten valve assembly to deck
Step 7 Solder supply lines to valve inlets
Step 8 Attach faucet spout to deck
D2
D1 = D2
D1
hot
cold
1/8"
Step 9 Flush water supply lines
Care of faucet finish
Clean nish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may
be used to preserve nish area.
Step 1 Remove faucet handle
Step 2 Remove and replace cartridge
Step 3 Attach faucet handle
Valve cartridge replacement
OFF = CCW
OFF = CW
Page 3

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184
Phone: [phone] ■Fax: [phone]
Website: symmons.com ■Email: [email protected]
Copyright © 2018 Symmons Industries, Inc. ■ZV-773 REV B ■121018
KN-113
identified
by groove
KN-114 (hot)
OFF = CW
KN-113 (cold)
OFF = CCW
valve cartridge
LN-222*
2 handles
included
plug button (4)
screw (2)
handle (2)
fastener (2)
gasket (2)
Faucet HandleStyle: LHM
Part Number Item (Qty)
Parts Assembly Allura Roman Tub Faucet SRT-4770
spout
aerator
RT-106*
Ordering replacement parts:
Call Symmons customer service at [phone],
[phone] M-F 7:30 am - 6:00 pm EST or
check our website at www.symmons.com for a
list of Symmons distributors.
Note: For decorative nish faucets add sufx
code letters to parts marked with an asterisk.
*
screw
plug button
screw
plug button
handle
fastener
gasket
valve cartridge
ange nut
hot/cold identier
valvebody
copper tube
tee
plug
centerbody
retainer
ange nut
3-1/8" (80 mm)
3" (76 mm)
Connect using
1/2" copper tubing
1" dia (25 mm)
Hole size
1-1/16" (27 mm) min
1-1/2" (38 mm) max
Finished deck thickness
1-3/8" (35 mm) max
*3-3/8" (86 mm) max
for TT style faucet
Dimensions Allura Roman Tub Faucet, SRT-4770
8" (203mm) min
18-1/4" (464 mm) max
with Symmons supplied copper tubing
3-15/16" (101mm)
5-15/16" (151mm)
*TT style faucet
8" (205 mm)
4-7/8"
123 mm
*Note: Use TT style faucet if deck thickness is 1-3/8" to 3-3/8" (35 mm - 86 mm)
Contact Symmons customer service to special order TT style faucet, model number SRT-4770-1-TT-BDY
1-7/8" (47 mm)
2-7/8" (73 mm)