System Q Zip SEE852 User manual

2MP Mini Eyeball 3.6mm Fixed Lens Camera
SEE852
ZipDVR.com
© 2021 System Q Ltd

xSEE615
I
© 2021 System Q Ltd
ZipNVR.com
Table of Contents
Part 1 Introduction 1
1 SEE852 ............................................................................................................................ 1
Part 2 Tools & Handy Extras 1
Part 3 Connections 2
Part 4 4-In-1 Technology 2
Part 5 Mounting 3
1 Mini Eyeball .................................................................................................................... 3
Part 6 OSD Menu 4
1 2MP OSD Menu Standard ............................................................................................... 4
Part 7 Troubleshooting 6
1 Camera Rebooting / Turning Off ..................................................................................... 6
2 Poor Quality Images ....................................................................................................... 6
3 Image is Black & White .................................................................................................. 6
4 NCD / No Image Displayed on Recorder ......................................................................... 6
Part 8 General Maintenance 8
Part 9 Specification 9
1 SEE852 ............................................................................................................................ 9
Part 10 Conditions 10
1 General Company Disclaimer ....................................................................................... 10
2 WEEE Declaration ......................................................................................................... 10
3 Copyright ...................................................................................................................... 10
Index 11

Introduction
1
© 2021 System Q Ltd
ZipNVR.com
1 Introduction
1.1 SEE852
The SEE852 is a MiniEyeballcamera featuring 4-in-1 video technology, idealwhen you’re
looking for your CCTV systemto be more low key.
This 2MP modelis compatible with most current DVRs on the market including the new Zip
DVR Lite model. It suits domestic installations and commercialjobs witha limited budget.
IP66 and available in white or grey with no contrasting lens rimit can seamlessly blend into
interior or exterior installs.
2 Tools & Handy Extras
· Screwdriver
· Drill
· Hammer
· 12V DC PSU
· Drillbits
· BNC Crimp Tool& BNCs
· RG59 Coax Cable
· DigitalMulti-Meter
· LCD400K - CCTV Test monitor

xSEE615
2
© 2021 System Q Ltd
ZipNVR.com
3 Connections
The camera has a 2.1mmsocket which requires 12V DC, use a regulated power supply rated
above the current draw ofthe camera.
The camera is polarity sensitive so connections must be correctly made.
The camera has a standard BNC connector for the 4-in-1 video output, the output canbe
changed to AHD, CVI or CVBS ifrequired.
4 4-In-1 Technology
Selectable HD-TVI, HD-CVI, AHD and CVBS (Analogue) Output. As default the camera is
set to HD-TVI, however the output can be changed to AHD, CVI or CVBS ifrequired.
This output canbe changed with the dip switches on the fly-lead ofthe camera. Please note the
“Output Mode”in the menu of the DVR won’t change the format, as the dip switch overrides the
output.
The dip switch configuration can be found below:-

Mounting
3
© 2021 System Q Ltd
ZipNVR.com
5 Mounting
5.1 Mini Eyeball
A template is provided in the box for marking the hole positions for the fixing screws.

xSEE615
4
© 2021 System Q Ltd
ZipNVR.com
6 OSD Menu
Access to the camera menu is by Coaxitron. For the ZIP DVRs, ZIP Coaxitron is set as
default.
To access the Cameras Menu via coaxitron:-
1. Click on the image in Live view
2. Click on the PTZ buttonat the bottomofthe screen
3. Click on the IRIS + button to display the menu
Use the directionalarrows to move up and
down through the menu.
Use the directionalarrows left and right to
change the option.
Use IRIS + to select & enter that menu option.
6.1 2MP OSD Menu Standard
AE
BRIGHTNESS
0 ~ 100 (Default 41)
EXPOSURE MODE
GLOBAL / CENTRE / BLC / FLC
RETURN
AWB
MODE
ATW /
MWB / GRAY WORLD
RGAIN
1 ~ 127 (Default 40)
BGAIN
1 ~ 127 (Default 30)
DAY – NIGHT
MODE
EXT / COLOR / B/W
RETURN

OSD Menu
5
© 2021 System Q Ltd
ZipNVR.com
IMAGE ENHANCE
CONTRAST
AUTO /
MANUAL
0 ~ 20 (Default 0)
SHARPNESS
AUTO /
MANUAL
0 ~ 20 (Default 8)
SATURATE
AUTO /
MANUAL
0 ~ 20 (Default 10)
3DNR
AUTO /
MANUAL
0 ~ 20 (Default 2)
2DNR
AUTO /
MANUAL
0 ~ 20 (Default 0)
MIRROR
CLOSE / OPEN
RETURN
VIDEO OUTPUT
HD
NO ADJUSTMENT SEE 4-IN-1
SWITCH
STANDARD
1080P 25 / 1080P 30 /
REBOOT & APPLY
RETURN
LANGUAGE
ENGLISH / SIMPLIFIED CHINESE / TRADITIONAL CHINESE /
RUSSIAN / SPANISH / FRENCH / POLISH / ITALIAN /
PORTUGUESE
RESET
SAVE – EXIT
EXIT

xSEE615
6
© 2021 System Q Ltd
ZipNVR.com
7 Troubleshooting
7.1 Camera Rebooting / Turning Off
A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supply which is rated above the current
consumption.
C. Use thicker gauge copper cabling to reduce the voltage drop to the camera, using thicker
cable willreduce the resistance between the camera and the power supply and therefore reduce
the voltage dropped along the cable.
7.2 Poor Quality Images
A. Check the video format the DVR (digitalvideo recorder), then set the camera to the relevant
video format – see the 4-In-1 Technology
B. Ifset to CVBS, thenthis is a low qualityvideo output for legacysystems (analogue - CVBS),
when using a 2 MegaPixelDVR or above thenuse another video format, like HD-TVI.
C. Reset the camera menu via Zip Coaxitron– OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolution ofthe camera.
7.3 Image is Black & White
A. Check the video format your DVR supports, then set the camera to the relevant video format
– see the 4-In-1 Technology
B. Reset the camera menu via Zip Coaxitron OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolution ofthe camera.
7.4 NCD / No Image Displayed on Recorder
A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supply which is rated above the current
consumption.
C. Use thicker gauge copper cabling to reduce the voltage drop to the camera, using thicker
cable willreduce the resistance between the camera and the power supply and therefore reduce
the voltage dropped along the cable.
2
4
2
4

Troubleshooting
7
© 2021 System Q Ltd
ZipNVR.com
D. Ensure that the BNC – BNC lead that is connected betweenthe camera and DVR has no
shorts between the ground and the centre core (positive) or open circuits along the centre core
(positive) or open circuits along the ground.

xSEE615
8
© 2021 System Q Ltd
ZipNVR.com
8 General Maintenance
· Routinely cleanthe camera to prevent dust build up as this caneffect the performance ofthe
camera. It is recommended to use a damp non-abrasive microfibre cloth.
· Routinely check the connections for power and data to ensure no water ingress and corrosion.
· Check that the cameras are firmlyattached to the wallor mounting bracket.
· Check playback in the recorder to ensure the camera is recording and triggering properly.

Specification
9
© 2021 System Q Ltd
ZipNVR.com
9 Specification
9.1 SEE852
Resolution
2MP
Lens Type
3.6mmFixed
Image Output
1 Volt Peak-Peak 75 ohm
Min.Illumination
0 Lux IR On
Day/Night
Mechanical(True Day-Night)
IR Range
30m
Input Voltage
12V DC
Current Consumption
300mA (IR On)
IP Rating
IP66
Video Connection
BNC Socket
Power Connection
2.1mmDC Socket
Finish
White/ Grey
Build
Metal
Dimensions
100mm(Diameter) x90 mm(Height)

xSEE615
10
© 2021 System Q Ltd
ZipNVR.com
10 Conditions
10.1 General Company Disclaimer
All specifications are approximate. System Q Ltd reserves the right to change any product
specifications or features without notice. Whilst every effort is made to ensure that these instructions
are complete and accurate, System Q Ltd cannot be held responsible in any way for any losses, no
matter how they arise, from errors or omissions in these instructions, or the performance or non-
performance of the equipment that these instructions refer to.
10.2 WEEE Declaration
This symbol on the products and/or accompanying documents means that used electronic
equipment must not be mixed with general household waste. For treatment, recovery and recycling
please return this unit to your trade supplier or local designated WEE/CG0783SS collection point as
defined by your local council.
10.3 Copyright
© Copyright 2021
Zip is a registered trademark of System Q Ltd, Chesterfield. Derbyshire. S40 2WB

Index
11
ZipNVR.com
© 2021 System Q Ltd
Index
- 2 -
2.1mm DC Socket 2
- 4 -
4-In-1 Technology 2
- A -
Adjustment 4
AHD 2
- B -
BNC 2
- C -
Cleaning 8
Connections 2, 8
Contrast 4
Copyright 10
CVBS 2
CVI 2
- D -
Declaration 10
Dimensions 9
Dip-Switches 2
Disclamer 10
- E -
Exposure 4
- F -
Format 2
- G -
General Disclaimer 10
- H -
Handy Extras 1
- M -
Maintenance 8
Mounting 3
- N -
NCD 6
No Image 6
- O -
OSD Menu 4
Output 2
- P -
Power 2
- Q -
Quality 6
- R -
Rebooting 6
- S -
Screws 3
Settings 4
Sharpness 4
Signal 6
Specification 9
- T -
Tools 1
Troubleshooting 6
TVI 2

xSEE615
12 ZipNVR.com
© 2021 System Q Ltd
- V -
Video 2, 6
Video Loss 6
Voltage drop 6
- W -
WEEE Declaration 10