Safety instruction
Suspension
Installation
Specification
Caution
Product content
Features
Application
Welcome to use EKL-081 conference speaker cabinet which features
compact contour, clear and delicate sound to suit for conference rein-
forcement application.
Please read user manual carefully before operation and keep it for
reference in future.
1. The speaker cabinet consists of one 8 inch 35mm cone woofer and
one 25mm ferrite tweeter. The woofer features elastic and durable
cloth surround for quick MFLF response and sufficient dynamic,
symmetric magnet design for low THD.
2. The crossover is designed with low consumption OFC inductor, high
quality film capacitor for reliable performance and prominent sound
3. The trapezoidal enclosure and acoustic foam eliminate standing wave
inside to make MFLF purer and frequency response flatter. The slender
cabinet suits for various installations.
4. HF filtering function to adjust sound brightness and HF detail; vocal
mode and music mode to meet the requirement of different
application;
EKL-081 speaker cabinet×2
User manual×1
Rated Power：200W (AES)
Rated Impedance：8Ω
Frequency Response（±3dB）：75Hz-18KHz
Sensitivity（1W/1M）：94dB
Coverage：H90°× V60°
Max SPL：114dB
Crossover：two way
Crossover Frequency：3700Hz
Installation：suspension
Connection：1×NL4speakon (IN1+、1-)
Enclosure：12mm MDF
Finish：black painting
Unit：tweeter：1″×1（25mm, 25mm exit）70 magnet
woofer：8″×1（35mm）120 magnet
Dimension（mm）：255 x 265 x 420（W×D×H）
Net Weight：7.4kg
Note: the above data is obtained from the test of Takstar
laboraroty, and Takstar has the final interpretation right!
1. Please make sure the power and impedance of power amplifier match
with that of the speaker cabinet. The unmatched situation leads to
equipment damage or bad sound.
2. Put the front side of the speaker cabinet to the audience to ensure the
sound effect.
3. Ask professional technician for installation.
4. Handle with care to avoid the speaker cabinet damage.
To avoid electric shock, over temperature, catching fire, explosion,
mechanical risk and hurt or property loss caused by improper use, please
read the following items carefully before operation:
1. Make sure the power of connected equipment matches with that of
this product before operation. Adjust the volume to proper level during
operation. Do not operate at high volume level to avoid hearing loss.
2. If abnormal phenomenon (smoke, abnormal smell) happens, please
turn off the power switch and disconnect the power plug with power
socket, and send the product to local dealer for maintenance.
3.The product and accessories should be put in dry and ventilated place
rather than humid or dusty environment. Prevent the product from
liquid, rain, water, over-colliding, throwing, vibrating, vent hole covered
to avoid function destroyed.
4. When the product needs to be installed on wall or ceiling, please fix it
tightly to avoid dropping risk.
5. Please abide by safety rules during operation. Do not use the product
in the place prohibited by regulation or law to avoid accident.
6. Do not disassemble or repair the product by yourself to avoid hurt. If
you have question or need service, please contact the local dealer.
Conference reinforcement, used with EKA-3A/EKA-3D/EKA-403D/
EKA- 3N/EKA-403N power amplifier
Column speaker
EKL-081
Operation
Playing mode selection:If you need music mode, set the switch to Music.
If you need vocal mode, set the switch to Speech mode. N means no
processing for the sound.
