Takstar EKT-081 User manual

音箱系列说明书
EKT-081音箱系列说明书
和家庭K歌系统而设计、开发的一款高品质卡拉OK音箱。该音
箱的特点是麦克风人声歌唱语音效果突出，并且演唱轻松，在
音乐表现上也具备高品质的音效，高、中、低频衔接流畅，结
合箱体容积和导相管、吸音棉的调节，使得这款音箱在低频方
面有上佳的表现，较有扎实的低频力度和低频下潜深度。使用
前请您仔细阅读说明书，以便能正确的操作使用。
若存在有疑问或者您有宝贵的建议，可通过拨打
得胜官方服务热线400 6828 333 或微信扫描二维码关
注得胜官方公众号与我们联系。
欢迎使用EKT-081卡拉OK音箱。该产品是针对小型KTV场合
适用于KTV包房、家庭K歌。
该音箱的低音扬声器所使用的纸盆阻尼特性和刚性良好，以
确保了扬声器在不同频率段工作时，不至于引起失真，海绵
折环也选用了耐腐蚀性较强的进口海绵压制而成，且弹性良
好，以确保扬声器能承受较大的振幅和动态。
一般来说音箱的中高频更容易触动人的听觉心理，在中频段
的调试如果把握不当，容易使人产生听觉疲劳、烦燥感。所
以在三寸高音纸盆材料选用上，选用了在中、高频频率段具
有响应特性平滑、人声和音乐在中高频表现保真度较高的纸
盆，结合耐高温音圈，使得这款三寸高音的音色细腻的同时
更能承受长时间的音乐功率。结合了人耳的生理听觉特性，
在分频器元件上对高频进行了适当修饰，音色上把握了“中
音准、透，高音细、亮而不噪”的准则，使音箱在KTV房间内
大声压歌唱、播放音乐时，有着较为满意的效果体现，且不
会出现中高频的毛刺感，避免造成人耳的听觉疲劳。
9TKT101S1A
产品特性
适用场合
EKT-081音箱
说明书
1. 确保功率放大器和音箱的功率、阻抗相匹配，过高功率的失衡搭
配易导致设备损坏。
2. 音箱横向吊挂安装，角度调整为朝向于听众区。
3. 音箱的安装需由专业工程人员进行，应固定牢靠，并选择安装在
不易碰触的位置。
4. 搬运音箱时，请小心轻放，保护好音箱不受损坏。
注意事项
标准配置
为避免电击、高温、着火、辐射、爆炸、机械危险以及使用不当等
可能造成的人身伤害或财产损失，使用本产品，请仔细阅读并遵守以
下事项:
1. 使用产品时请确认所连接设备与本产品功率是否匹配以及合理调整
音量大 小，不要在超过产品功率及大音量下长时间使用，以免造成
产品异常和听力损伤；
2. 使用中若发现有异常（如冒烟、异味等），请立即关闭电源开关并
拔掉电源插头，然后将产品送经销商检修；
3. 本产品及附件都应放置在室内干燥通风处，勿长期存放在潮湿、灰
尘多的环境，使用中避免靠近火源、雨淋、进水、过度碰撞、抛
掷、振动本机及覆盖通风孔，以免损坏其功能；
4. 若产品需要固定于墙壁或天花板上时，请确保固定到位，防止因固
定强度不足导致产品发生跌落危险；
5. 使用该产品时需遵守相关安全规定，法律法规明确禁止使用场合请
勿使用本机，以免导致意外事故；
6. 请不要自行拆机改装或维修，以防止出现人身伤害，如有问题或服
务需求请联系当地经销商跟进处理。
安全警示
技术参数
注：以上数据由得胜实验室测试得到，并拥有最终解释权！
额定功率：240W(AES)
额定阻抗：8Ω
频率响应：40Hz-18KHz(±3dB)
灵敏度：92dB
覆盖角度：H100°×V 50°
声压级：111dB
分频模式：无源二分频
分频点：1900Hz
吊挂／安装：横向吊挂
接线方式：按压式接线盒
箱壳：15厘中纤板
表面处理：黑色贴皮
高频：3″×2(13芯)55磁钢
低频：8″×1（35芯)100+100双磁钢
规格（mm）：445×205×280（W×D×H）

Welcome to use EKT-081 karaoke speaker cabinet. This product is a
high-quality karaoke speaker cabinet designed and developed for KTV
and home karaoke audio system. It features outstanding human voice
via microphone, easy singing, and high-quality sound effects in music
performance. There is smooth transition among bass, midrange and
treble. The cabinet volume, coupled with the debugging of the vent
tube and acoustic foam, makes the speaker also perform well in low
frequency with powerful and deep bass.
Please read the user manual for better operation and keep it for
reference in future.
User Manual
EKT-081
Features
The cone used in the woofer has good damping and rigidity to
ensure that the speaker will not cause distortion when working in
different frequencies. The surround is made of imported sponge
with strong corrosion resistance and has strong elasticity, thus
making the speaker able to withstand greater amplitude and
dynamic range.
Generally speaking, people's auditory system is more sensitive to MF
& HF. If the debugging of the MF is not correct, it is easy to cause
auditory fatigue and irritability. Therefore, the tweeter features a
three-inch cone with flat frequency response and high fidelity of
human voice and music performance in MF & HF. A heat-resistant
voice coil makes this tweeter sound delicate and able to withstand
high music power for a long time. Combining the physiological and
auditory characteristics of the human ear, the MF is appropriately
modified on the crossover element to make sure that the midrange
is accurate and transparent, and the treble is delicate, bright but not
dry. Thus, the speaker has relatively satisfactory sound effect when
people sing at loud pressure in a KTV room and there will be no
burrs, so as to prevent users from hearing fatigue due to long-term
listening.
Specification
Rated Power: 240W (AES)
Rated Impedance: 8Ω
Frequency Response: 40Hz-18KHz (±3dB)
Sensitivity: 92dB
Covering Angle: H100°×V50°
SPL: 111dB
Crossover: passive, two-way
Crossover Frequency: 1900Hz
Installation: horizontal flying
Wiring Method: push-type terminal
Enclosure: 15mm MDF
Finish: black veneer
HF: 3″×2 (13mm voice coil), 55mm magnet
LF: 8″×1 (35mm voice coil), 100mm+100mm double magnet
Dimensions (mm): 445×205×280 (W×D×H)
Caution
1. Make sure that the power and impedance of the power amplifier are
matched with those of the speaker. Unbalanced matching can
cause damage to the equipment.
2. The speaker is suspended horizontally and adjusted to face the
audience area.
3. The installation of the speaker should be carried out by engineering
professionals. It should be firmly fixed and installed in a location
that is not easy to access.
4. When transporting the speaker, please handle it carefully to protect
it from damage.
Note: The data is tested by Takstar Laboratory and Takstar has the
final interpretation right!
Safety instruction
In order to avoid possible personal injury or property damage
caused by electric shock, high temperature, fire, radiation, explosion,
mechanical hazards and improper use, please read and observe the
following items carefully before using the product.
1. When using the product, please confirm whether the power of the
connected device matches the power of the product, and adjust the
volume of the device. Do not use it for a long time when the power
of the product is exceeded or at a high volume to avoid product
failure and hearing damage.
2. If there is any abnormality (such as smoke, odor, etc.) during use,
please turn off the power switch and unplug the power plug
immediately, and then send the product to the dealer for
maintenance.
3. The product and accessories should be placed indoors in a dry and
ventilated place. Do not store them in a humid and dusty
environment for a long time. Avoid getting close to fire, rain, water,
excessive collision, throwing, vibrating the machine and covering
the ventilation holes during use, so as not to damage its function.
4. If the product needs to be fixed on the wall or ceiling, please make
sure to fix it in place to prevent it from falling down.
5. When using the product, you must abide by the relevant safety
regulations. Please do not use the product in the occasions that are
clearly prohibited by laws and regulations to avoid accidents.
6. Please do not disassemble, refit or repair the product by yourself to
prevent personal injury. If you have any questions or service needs,
Application
KTV, home karaoke
Product Content
EKT-081 speaker cabinet
User manual