OUTDOOR EMERGENCY PHONES
VOIP-500 – Single Button Native
VoIP Emergency Phone
Copyright
2012
Talk-A-Phone
Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, WEBS, WEBS Contact and Scream Alert are registered trademarks of Talk-A-Phone Co. Cisco, the Cisco
logo, and Cisco Systems are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All rights reserved.
Description
The VOIP-500 Series Phone is an outdoor-rated, ADA-compliant hands-free
Voice over IP (VoIP) Emergency Phone for use in locations such as: parking
facilities, college campuses, medical centers, and industrial parks.
Features
•Exceptional sound clarity during conversation (over 90dB, configurable)
and paging (over 100dB, configurable)
•Unit can be paged remotely by security as part of Talk-A-Phone’s Wide-
Area Emergency Broadcast System (requires WEBS Contact® software)
•Ethernet connectivity and full IP compatibility with existing routers and
LAN infrastructure
•Additional Layer 2 switch Ethernet port to connect other devices (e.g. IP
Video Cameras)
•Supports standard SIP protocol
•Configuration and firmware upgrades through Web GUI
•Power over Ethernet (PoE, 802.3af), 12V DC, 24V AC/DC
•Cast metal raised letter and Braille signage for ADA compliance
•Vandal resistant stainless steel faceplate
•1.5" diameter metal button painted with UV-resistant finish
•Auxiliary inputs and outputs to integrate with CCTV, LED Blue
Lights, Scream Alert®, Gates and other Access Points
•Three LED indicators for hearing impaired (call placed, call
received, help on the way)
•Built-in auto-dialer can dial six numbers: if first number doesn't
answer or is busy, dials next number
•Auto-answer allows security to monitor and initiate calls with
Emergency Phone
•Automatically inform the attendant of emergency phone location via recorded message
Specifications
Construction: 12 gauge (2.8mm) #4 brushed stainless steel faceplate
Dimensions: Front Panel: 9.5 (241) W x 11.75 (298) H in (mm)
Back Box: 6.4 (163) W x 9.75 (248) H x 2.71 (69) D in (mm)
Weight: 8 lbs (3.6 kg)
Storage Temperature: -40º F to +149º F (-40º C to +65º C)
Operating Temperature: -40º F to +131º F (-40º C to +55º C)
Relative Humidity: Up to 95% non-condensing
Protection: Circuit board conformal coated
Mounting: Flush mount (surface mount options available)
Communication: Full Duplex 2-way hands-free communication
Digit Capacity: Up to 30 digits, including pauses, for each of six phone numbers
Call Control Signaling: SIP (RFC3261 compliant)
NOTE: Not all features of the VOIP-500 Series Phone are available when used in conjunction with analog telephony adaptor devices or
with Public Switched Telephone Network (PSTN).
For example, the round robin dialing feature (See "VOIP-500 Configuration and Operation Manual", Section 4.5.1) and voice message
functionality (See "VOIP-500 Configuration and Operation Manual", Section 4.7) of the VOIP-500 Series Phone may not operate as
described in the manual when used in conjunction with equipment such as a Model VOIP-1-2-4-8 interface, 3rd party gateways, and/or
PSTN interfaces such as T1, PRI, or loopstart trunks.
Talk-A-Phone’s VOIP-500 Series Phone has tested compatible
with Cisco UCM 7.1 and UCM 8.6. The Cisco Compatible logo
signifies that Talk-A-Phone’s product has undergone
interoperability testing by Talk-A-Phone together with Cisco and
a third-party test house based on testing criteria set by Cisco.
Talk-A-Phone is solely responsible for the support and warranty
of its product. Cisco makes no warranties, express or implied,
with respect to Talk-A-Phone’s product or its interoperation with
the listed Cisco product(s) and disclaims any implied warranties
of merchantability, fitness for a particular use, or against
infringement.