TANDBERG Maestro MXP Assembly instructions

Installation Sheet
TANDBERG Maestro MXP
12 3
4
Unpacking Mounting camera Codec cover
Access cables Connecting cables
5
Cables
Microphones
Remote Control
PC
Display
S-VIDEO
DVI-I/VGA
COMPOSITE
Camera
LCD
Speakers
Amplifier
Codec
Microphones
VGA
ISDN BRI 1-6
ISDN PRI
LAN
POWER
1
2
3
4Codec Interface
Digital Video out
Push button
Detachable
cable cover
1
3
2
Maestro unit:
TANDBERG 6000 codec
Codec Cover
LCD Screen
Speakers
Amplifier
Ethernet/LAN cable
2x Microphone cables
VGA to DVI-A cable, for PC
S-video cable, for display
ISDN cables
T1/PRI cable
Power cable
This box contains:
Accessories box:
TANDBERG Percision HD Camera
2x Table microphones
TANDBERG Remote Control TRC3
4x AAA Batteries
TANDBERG Tracker
Scart adapter
Composite cable
Power cables
Plug adapter US
VGA to DVI-A cable, for projector
S-video cable, for projector
RS-232 split cable
Installation Sheet
User Manual, CDROM
Registration card
D13311.02

System Configuration
TouchtonesSnapshot
Presets
TIP
If the menu is not already present, press
the OK/Menu key on the remote control
to open the menu. Navigate the menu
with arrow keys and OK.
2Language
Open ‘General’. Select language.
Press ‘Save’ to save changes.
Please read the user manual for further details.
5LAN Configuration
Open ‘Network - LAN Settings’.
Make IP/H.323 configuration and press
‘Save’.
1Open the Control Panel
Choose ‘Control Panel’ from the main menu
and press OK
4ISDN Configuration
Open ‘Network - ISDN-BRI Settings’.
Make ISDN configuration and press ‘Save’.
3Monitor Configuraion
Single Monitor: In ‘General’, set Dual Monitor: Off
Dual Monitor: In ‘General’, set Dual Monitor: On
Press ‘Save’ to save changes.
D13311.02