Tascam DR-60DmkII User manual

REFERENCE MANUAL
D01231320A
DR-60D)"
Linear PCM Recorder

2TASCAM DR-60DMKII
Contents
1 – Introduction................................................................. 5
Features.......................................................................................................... 5
Conventions used in this manual......................................................... 6
2 – Names and functions of parts .................................... 7
Front panel.................................................................................................... 7
Left side panel ...........................................................................................10
Right side panel ........................................................................................ 11
Rear panel ................................................................................................... 12
Top panel..................................................................................................... 13
Bottom Panel ............................................................................................. 13
Home Screen.............................................................................................. 14
Recording Screen.....................................................................................16
Menu item list............................................................................................18
Using menus ..............................................................................................19
Basic operation..........................................................................................20
3 – Preparation ................................................................22
Powering the unit.....................................................................................22
Power sources ...................................................................................22
Using AA batteries...........................................................................22
Using an AC adaptor (sold separately) ....................................23
Using an external battery pack (sold separately)................23
Using USB bus power .....................................................................24
Turning the power on and off (putting it in standby)................25
Starting up the unit.........................................................................25
Shutting down (putting the unit in standby) .......................25
Resume function..............................................................................26
Setting the date and time.....................................................................26
Inserting and removing SD cards.......................................................27
Inserting the SD card......................................................................27
Removing the card..........................................................................27
SD card write protection switches............................................28
Preparing an SD card for use ...............................................................29
Camera connection and attachment ...............................................29
Connecting monitors and headphones..........................................30
Monitoring..................................................................................................30
Enabling monitoring ......................................................................30
Selecting the monitored signal..................................................31
4 – Recording ................................................................... 32
Selecting file format, sampling frequency,
and maximum file size ........32
Preparing the recording inputs ..........................................................33
Connecting microphones ............................................................33
Recording an external device (LINE IN) ..................................34
Setting the input types .................................................................34
Using phantom power...................................................................35
Using plug-in power.......................................................................36
Adjusting the input level/Muting ......................................................36
Using the limiter .......................................................................................38
Using the low-cut filter ..........................................................................39
Set where to save the file......................................................................39
Overview of recording modes ............................................................39
Recording (MONO/STEREO recording) ............................................40
Make recording settings ...............................................................40
Starting the recording ...................................................................41
File names when recording in MONO/STEREO ....................41
Simultaneously recording two files at different input levels
(DUAL REC)..................................................................................................42
Enabling dual recording................................................................42

TASCAM DR-60DMKII 3
Contents
Starting dual recording .................................................................43
Dual recording file names ............................................................44
Recording 4 channels .............................................................................44
Making 4-channel recording settings .....................................44
Starting 4-channel recording......................................................45
File names when recording in 4-channel...............................46
Recording automatically (AUTO REC)...............................................46
Creating and changeover to a new file during continued
recording (Track increment).................................................................48
Manual track increment during recording ............................48
Automatic track increment by file size....................................48
Mark function ............................................................................................49
Adding marks manually to a recording...................................49
Adding marks automatically to a recording..........................49
Moving to a mark position ...........................................................49
Recording the moment before pushing RECORD (PRE REC)...50
Delaying the start of recording (REC DELAY) ...............................50
Self-timer function...................................................................................51
Using the auto tone function ..............................................................51
Setting the auto tone function...................................................51
Setting auto tone length ..............................................................52
Adjusting the volume of the auto tone and the slate tone......52
Adding slate tones...................................................................................52
Recording duration .................................................................................53
5 – Working with Files and Folders (BROWSE screen) ...54
Screen navigation ....................................................................................54
Icons on the BROWSE screen ...............................................................55
File operations...........................................................................................55
Folder operations.....................................................................................56
Creating a new folder .............................................................................57
6 – Playback .....................................................................58
Adjusting playback volume .................................................................58
Setting the playback area (AREA) ......................................................58
Selecting a folder for the playback area (1)....................................59
Selecting a folder for the playback area (2)....................................60
Selecting files for playback (skip).......................................................60
Playback.......................................................................................................61
Pausing ................................................................................................61
Stopping.............................................................................................. 61
Rewinding and fast-forwarding (search) ...............................61
Changing the playback position................................................ 61
Repeat playback (REPEAT) .................................................................... 61
Moving back a few seconds for replay (jump-back playback)...62
Playback of files recorded using dual recording..........................62
7 – QUICK button operations ......................................... 63
Features of the QUICK button .............................................................63
Opening the quick menu ......................................................................64
Closing the quick menu ................................................................65
Deleting the selected file (Quick Delete)........................................65
Dividing the selected file (DIVIDE) ....................................................65
Increasing the perceived overall sound pressure to enhance
listenability (Level Alignment) ............................................................67
Using the playback equalizer ..............................................................68
Setting mic input gain with the quick menu.................................68
8 – Mixer ...........................................................................69
Making mixer settings............................................................................69
Using the MS decoder ............................................................................70
Decoding the input sound as you record ..............................70

4TASCAM DR-60DMKII
Contents
Decoding the playback sound ...................................................71
MS decoder settings.......................................................................71
9 – Connecting with a computer.................................... 72
Transferring files to a computer .........................................................73
Transferring files from a computer....................................................73
Disconnecting from a computer........................................................73
10 – Settings and Information ....................................... 74
Viewing Information (INFORMATION)..............................................74
File information page..................................................................... 74
Card information page ..................................................................75
System information page.............................................................75
System Settings and Formatting (SYSTEM) ...................................76
Setting the automatic power saving function .....................76
Setting the backlight......................................................................76
Adjusting the display contrast....................................................76
Setting the type of AA batteries................................................76
Setting the phantom power voltage .......................................76
Restoring the factory settings ....................................................77
Using QUICK FORMAT ....................................................................77
Using FULL FORMAT.......................................................................77
Setting the format of file names ........................................................78
File name format .............................................................................78
Setting the WORD item .................................................................78
Resetting the number (COUNT).................................................78
11 – Using the REMOTE jack ...........................................79
Footswitch (TASCAM RC-3F) ................................................................79
Setting footswitch operation......................................................79
Using the footswitch ......................................................................80
Remote control (TASCAM RC-10)........................................................80
Setting the wired remote control .............................................80
Using the wired remote control ................................................80
Overview of mode functions ......................................................80
12 – Messages .................................................................. 81
13 – Troubleshooting......................................................84
14 – Specifications ..........................................................86
Ratings..........................................................................................................86
Inputs and outputs..................................................................................86
Analog audio input and output .................................................86
Control input and output .............................................................87
Audio performance.................................................................................87
Computer compatibility ........................................................................87
Other specifications................................................................................88
Dimensional drawings ...........................................................................89

TASCAM DR-60DMKII 5
1 – Introduction
Thank you very much for purchasing the TASCAM DR-60DMKII
Linear PCM Recoder. Please read this Owner’s Manual carefully in
order to maximize your use of all the unit’s features. We hope that
you will enjoy using this recorder for many years to come.
After you have finished reading this manual, please keep it in a safe
place for future reference.
You can also download the Owner’s Manual from the TEAC Global
Site (http://teac-global.com/).
Features
This recorder includes audio inputs and outputs that are suitable
for use with digital single-lens reflex (DSLR) cameras, enabling the
recording of high-quality audio with DSLR video.
• Compact audio recorder that uses SD/SDHC cards as recording
media
• TASCAM original High Definition Discrete Architecture (HDDA)
microphone preamps provide high-quality recording inputs
• In addition to ordinary stereo recording, simultaneous recording
of up to four channels is possible
• Four channels can be mixed down to two for stereo output
• Recording levels can be adjusted independently for the 1/L, 2/R
and 3-4 inputs
• Dual recording function allows two files to be recorded
simultaneously at different levels
• 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format) recording
possible
• Broadcast Wave Format (BWF) supported as WAV recording
format
• XLR mic/line inputs can provide phantom power (+24V/+48V)
TRS mic/line inputs (1/L and 2/R) support +24dBU input when
set to LINE
• Stereo mini jack input supports mics that require plug-in power,
allowing the input of video mics and other high-output mics
(+10dBV maximum input level)
• Slate tone functions (automatic/manual) simplify synchronization
of video files when editing
• CAMERA OUT connector allows the high-quality audio from this
unit to be output to a DSLR camera for recording
• CAMERA IN connector enables convenient monitoring of audio
from a DSLR camera
• Auto-record function starts recording automatically when a set
sound input level is detected
• Mid-side decoding function can be used with MS mics
• Auto-record function can automatically start and stop recording
at set levels
• Can start recording a new file automatically when a maximum
file size set in advance is reached without interrupting recording
• A QUICK button is available for easy access to various functions
• Track incrementing function allows a recording to be split by
creating a new file when desired
• Pre-recording (PRE REC) function allows the unit to record the 2
seconds of sound before recording is activated
• Limitter function is available to reduce the level automatically in
case of excessively large input.
• Low cut filter conveniently reduces low-frequency noise
• Self-timer function to start recording after a set period of time.
• Jump back and play function allows the last several seconds of
the currently played file to be replayed again by simply pressing
a button

6TASCAM DR-60DMKII
1 – Introduction
• Delay function that eliminates time lags caused by differences in
the distances of two sets of inputs from the sound source
• DIVIDE function allows files to be split where desired
• MARK function convenient for moving to specific locations
• Equalizers function for playback, and level alignment function to
enhance the perceived overall sound pressure
• File name format can be set to use a user-defined word or the
date
• Resume function to memorize the playback position before the
unit is turned off (enter standby).
• 3.5 mm (1/8”) line/headphones output jack
• 128 x 64 pixel LCD with backlight
• Mini-B type USB 2.0 port
• Operates on 4 AA batteries, an AC adaptor (sold separately:
TASCAM PS-P515U), external battery pack (sold separately:
TASCAM BP-6AA)or USB bus power
• Tripod mounting threads (bottom) and DSLR screw attachment
that allows attachment and removal with a coin (top)
• Dedicated remote control jack (for use with RC-10 and RC-3F (sold
separately) )
• HOLD switch to prevent accidental operation
• Handles on the front left and right sides protect the screen and
can be used to attach a shoulder belt
Conventions used in this manual
In this manual, we use the following conventions:
• When we refer to buttons, connectors and other parts of this unit
and other equipment, we use a bold font like this: MENU button.
• When we show messages, for example, that appears on the unit’s
display, the typeface looks like this: REPEAT .
• SD memory cards are called “SD cards”.
• We refer to digital single-lens reflex cameras as “DSLR cameras”
or “DSLRs”.
• Words that appear on the computer display are shown in
quotation marks like this: “DR-60DMKII”
• Additional information is provided as necessary as tips, notes
and cautions.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
CAUTION
Failure to follow these instructions could result in injury, damage
to equipment or lost recording data, for example.

TASCAM DR-60DMKII 7
2 – Names and functions of parts
Front panel
1Handles
Attach a strap, for example, here.
2Display
Shows a variety of information.
3DATA dial (ENTER/MARK)
Turn to select items and change values on setting screens.
Use also to change the playback position in a file.
Push to confirm selections on setting screens and to answer “YES”
to confirmation pop-up messages.
Press during recording to add a mark manually. (See “Adding
marks manually to a recording” on page 49.)
Press the .or /button while pressing and holding this
dial to move to the previous or next mark, respectively. (See
“Moving to a mark position” on page 49.)
4MONITOR SELECT button
When not playing back, press to open the monitoring source
selection pop-up menu.
When playing back dual-recorded files, press to switch between
files.
5MENU button
When the Home Screen or MIXER screen is open, press to open
the MENU Screen.
When a setting screen is open, press to move up one level in
the menu. When the MENU Screen is open, press to return to the
Home Screen.
6MIXER button
Press this button to open the MIXER screen.
When the MIXER screen is open, press this button to return to
the Home Screen.

8TASCAM DR-60DMKII
2 – Names and functions of parts
7QUICK button
Press when the Home Screen, BROWSE screen or MIXER screen is
open to show the quick menu pop-up.
The function to be shown depends on the state of the unit when
the button is pressed.
Recorder status Functions shown
Stopped
Delete/divide current playback file, level
align, playback EQ and mic input gain
setting functions
Playing back Level align and playback EQ functions
Recording
standby Mic input gain setting function
Recording
MIXER screen
open Mic input gain setting function
BROWSE screen
open File/folder operations
8DUAL indicator
This lights orange when recording in dual recording mode.
94CH indicator
This lights orange when recording in 4-channel recording mode.
0REC indicator
This blinks when in recording standby and lights red when
recording.
q1/L knob and PEAK indicator
Use this knob to adjust the input level from the 1/L connector on
the left side of the unit.
The 1/L PEAK indicator lights when the 1/L input level is about
to cause distortion. This also lights if distortion occurs in the
analog circuitry during mic input, but this does not light if
distortion occurs in the analog circuitry during line level input.
(See “Adjusting the input level/Muting”on page 36.)
wInput switch (1/L)
Set the input type for the 1/L connector and whether phantom
power is on or off.
e2/R knob and PEAK indicator
Use this knob to adjust the input level from the 2/R connector
on the left side of the unit.
The 2/R PEAK indicator lights when the 2/R input level is about
to cause distortion. This also lights if distortion occurs in the
analog circuitry during mic input, but this does not light if
distortion occurs in the analog circuitry during line level input.
(See “Adjusting the input level/Muting”on page 36.)
rInput switch (2/R)
Set the input type for the 2/R connector and whether phantom
power is on or off.
t3-4 knob and PEAK indicator
Use to adjust the input level from the 3/4 connector on the left
side of the unit.
The 3-4 PEAK indicator lights when the 3-4 input level is about
to cause distortion.

TASCAM DR-60DMKII 9
2 – Names and functions of parts
y.button
During playback or when stopped in the middle of a file, press to
return to the beginning of the file.
When stopped at the beginning of a file, press to skip to the
beginning of the previous file.
Press and hold to search backward.
Press this button while pressing and holding the DATA dial to
return to the previous mark.
On the setting screens, use this button to move the cursor left.
On the BROWSE Screen, press this button to move up a level.
uStop(8) [HOME] button
Press this button during playback to cause the playback to pause
at the current position. Press this button during pause time to
return to the beginning of the playback file.
Press this button during recording or recording standby to cause
the recording to stop.
When any other screen is open, press this button to return to the
Home Screen. Use this button to answer “NO” to a confirmation
message.
i/button
When stopped or playing back, press to skip to the next file.
Press and hold to search forward.
On the setting screens, use this button to move the cursor right.
Press this button while pressing and holding the DATA dial to
move to the next mark.
On the BROWSE Screen, press this button to move down a level.
If a file is selected, the file is loaded and the unit returns to the
Home Screen and stops.
o7(playback) button
When the Home Screen is displayed and playback is stopped,
press this button to start playback.
During playback, press this button to start jump-back playback.
(See “Moving back a few seconds for replay (jump-back
playback)” on page 62.)
When a file or folder is selected in the BROWSE screen, press this
button to return to the Home Screen and play the file or the first
file in the folder from the beginning.
pSLATE button
Press and hold during playback to record a slate stone. (See
“Adding slate tones”on page 52.)
a0(record) button
Press when stopped to start recording standby
Press when recording to pause recording (resume recording
standby).

10 TASCAM DR-60DMKII
2 – Names and functions of parts
Left side panel
NOTE
Do not apply excessive force when plugging in external devices to
connect them to this unit or during use. In particular, be careful
when using a standard-to-mini plug adapter, because the appli-
cation of unintended force could result in damage to the device.
s1/L connector (XLR/TRS)
These are balanced analog XLR/TRS combo jacks for microphone
and line level inputs.
XLR (1: GND, 2: HOT, 3: COLD)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
d3-4 connector (3.5mm stereo mini jack)
This TRS analog input jack can provide plug-in power.
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
f2/R connector (XLR/TRS)
These are balanced analog XLR/TRS combo jacks for microphone
and line level inputs.
XLR (1: GND, 2: HOT, 3: COLD)
TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
CAUTION
• Confirm that phantom power is OFF before connecting a line
level device to a 1/L connector or 2/R connector. If you connect
a line level device while phantom power is being supplied, that
device and this unit could be damaged.
• When using a condenser microphone, before connecting to and
disconnecting from a 1/L connector or 2/R connector, confirm
that the phantom power for that jack is OFF. If you connect or
disconnect a mic while phantom power is being supplied, that
mic and this unit could be damaged.
• Do not connect an unbalanced dynamic mic to an XLR connector
when phantom power is being supplied. Doing so could damage
that mic and this unit.
gCAMERA IN connector (3.5mm stereo mini jack)
Connect to the audio output of a camera.
Refer to the camera’s operation manual to identify this connector
on the camera. (See “Camera connection and attachment” on
page 29.)
hREMOTE connector (2.5mm TRS jack)
Connect a TASCAM RC-3F footswitch or TASCAM RC-10 wired
remote control (both sold separately) here to enable remote
starting and stopping of playback and other functions. (See “11 –
Using the REMOTE jack” on page 79.)

TASCAM DR-60DMKII 11
2 – Names and functions of parts
jCAMERA OUT (LOW) volume control
Use to adjust the volume output from the CAMERA OUT (LOW)
connector.
kCAMERA OUT (LOW) connector (3.5mm stereo mini jack)
Connect a camera external mic connector.
Refer to the camera’s operation manual to identify this connector
on the camera. (See “Camera connection and attachment” on
page 29.)
Right side panel
NOTE
Do not apply excessive force when plugging in headphones
and external devices to connect them to this unit or during use.
In particular, be careful when using a standard-to-mini plug
adapter, because the application of unintended force could result
in damage to the device.
lSD card slot
Insert an SD card here.
;button
Press and hold this button to turn the unit’s power ON or
OFF(Standby). (See “Turning the power on and off (putting it in
standby)” on page 25)

12 TASCAM DR-60DMKII
2 – Names and functions of parts
zHOLD switch
Shift to the top end (in the direction of the arrow) to engage the
hold function.
All buttons are inoperative when hold is ON.
xUSB port
Use the included USB cable to connect with a computer USB
port. (See “9 – Connecting with a computer” on page 72.)
Power can be supplied through the USB cable provided with the
unit or an AC adaptor (sold separately: TASCAM PS-P515U).
CAUTION
Always connect the recorder directly to a computer. Do not use a
USB hub.
cPHONES volume control
Use to adjust the volume output from the PHONES jack.
vPHONES jack (3.5mm stereo mini jack)
Connect stereo headphones to this stereo mini jack.
Use the PHONES control to adjust the volume.
CAUTION
Before connecting headphones, lower the PHONES volume to
the minimum level. Failure to do so could result in a sudden loud
noise that could harm hearing, for example.
bCAMERA OUT (HIGH)/LINE OUT volume control
Use to adjust the volume output from the CAMERA OUT (HIGH)/
LINE OUT jack.
nCAMERA OUT (HIGH)/LINE OUT jack (3.5mm stereo mini jack)
Use this to connect with the line input jack of an amp or other
equipment.
Use the CAMERA OUT (HIGH)/LINE OUT control to adjust the
volume.
Rear panel
mBattery compartment cover

TASCAM DR-60DMKII 13
2 – Names and functions of parts
,Battery compartment
Install batteries (4 AA batteries) in this compartment to power
the unit. (See “Using AA batteries” on page 22.)
Top panel
.DSLR attachment bracket
Use this bracket, which is preinstalled on the unit, with the DSLR
mounting screw.
If you do not want to use this bracket, use a coin or other tool to
remove the four attachment screws.
/DSLR mounting screw (1/4-inch)
Use to attach this unit to the bottom of a camera or a rack that
supports camera mounting screws, for example.
Bottom Panel
!Tripod mounting threads (1/4-inch)
Use to attach this unit to a tripod.
CAUTION
• Tighten the unit securely to the tripod or microphone stand to
prevent it from falling off.
• Place the tripod or microphone stand on a level surface when
using it with this unit.
• Some tripods have different screw specifications that make direct
connection impossible. Use a commercially-available adapter
with such tripods.
@Video camera pin hole
When using a tripod with a pin for video cameras, align this hole
with the pin when attaching the unit to the tripod.

14 TASCAM DR-60DMKII
2 – Names and functions of parts
Home Screen
NOTE
When monitoring, some meters, icons and other items will
change to recording screen appearance.
1Monitoring mode
This shows what audio is now being monitored.
Indicator Meaning
MIX Mix of channels 1-4,
or dual recording mode main file
SUB Dual recording mode sub file
1+2 Mix of channels 1-2
3+4 Mix of channels 3-4
CAM CAMERA IN jack sound input
CH1 Channel 1 sound input
1-M Left channel of dual recording mode main file
1-S Left channel of dual recording mode sub file
CH2 Channel 2 sound input
Indicator Meaning
2-M Right channel of dual recording mode main file
2-S Right channel of dual recording mode sub file
CH3 Channel 3 sound input
3-M Left channel of dual recording mode main file
3-S Left channel of dual recording mode sub file
CH4 Channel 4 sound input
4-M Right channel of dual recording mode main file
4-S Right channel of dual recording mode sub file
2Repeat playback setting
One of the following icons appears according to the current
setting.
Single file playback
Single file repeat playback
All file repeat playback
3Playback area
This shows the current playback file area.
ALL All files in the MUSIC folder
FOLDER All files in the selected folder
4Current playback file number/total number of files
This shows the current file number and total number of files in
the current playback area.
5Elapsed time
This shows the elapsed time (hours: minutes: seconds) of the
current file.

TASCAM DR-60DMKII 15
2 – Names and functions of parts
6Power supply status
When a battery is being used, a battery icon shows the amount
of power remaining in bars (“ ”, “ ”, “ ”).
The battery is almost dead and the power will soon turn off
(standby) if the icon has no bars“ ”.
When using the PS-P515U AC adaptor (sold separately) or USB
bus power, “ ” appears.
NOTE
Sometimes a Battery Low warning appears when recording
or conducting other demanding operations even when battery
power remains.
7Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
8Stopped
9Paused
7Playing back
,Fast-forwarding
mFast-rewinding
/Skipping forward
.Skipping backward
8Level meter
These show the levels of the input playback signals.
9Track status display
This icon changes according to the recording mode.
Indicators
(examples) Meaning
Playing a file recorded in MONO or
STEREO mode
/ / / Monitoring in MONO mode
/ Monitoring in STEREO mode
/
Playing a file recorded in DUAL MONO
or DUAL ST mode or monitoring in these
modes
Playing a file recorded in 4CH mode or
monitoring in this mode
0Playback position display
The current playback position is shown by a bar. As playback
progresses, the bar extends to the right.
qFile name
This shows the name of the file playing back unless there are
multiple files recorded in 4-channel recording mode or dual
recording mode. In these cases, it shows the project name.
wRemaining time
This shows the remaining time (hours: minutes: seconds) of the
current file.

16 TASCAM DR-60DMKII
2 – Names and functions of parts
eLevel align status
This icon shows whether the level align function is on or off. (See
“Increasing the perceived overall sound pressure to enhance
listenability (Level Alignment)” on page 67.)
Level align function off
Level align function on
rPlayback equalizer status
This icon shows whether the playback equalizer is on or off. (See
“Using the playback equalizer” on page 68.)
Playback equalizer off
Playback equalizer on
tPeak value in decibels (dB)
The maximum level that occurs in a fixed period of time is
displayed digitally.
Recording Screen
1Monitoring mode
This shows what audio is being monitored now.
Indicator Meaning
MIX Mix of channels 1-4,
or dual recording mode main file
SUB Dual recording mode sub file
1+2 Mix of channels 1-2
3+4 Mix of channels 3-4
CAM CAMERA IN jack sound input
CH1 Channel 1 sound input
1-M Left channel of dual recording mode main file
1-S Left channel of dual recording mode sub file
CH2 Channel 2 sound input
2-M Right channel of dual recording mode main file
2-S Right channel of dual recording mode sub file
CH3 Channel 3 sound input

TASCAM DR-60DMKII 17
2 – Names and functions of parts
Indicator Meaning
3-M Left channel of dual recording mode main file
3-S Left channel of dual recording mode sub file
CH4 Channel 4 sound input
4-M Right channel of dual recording mode main file
4-S Right channel of dual recording mode sub file
2Prerecording or Auto recording function status
“ ” appears when the prerecording function is ON , and in
recording standby.
“ ” appears when the auto recording function is ON , and
recording.
3Recording format
This shows the file recording format.
WAV16, WAV24, BWF16 or BWF24
4Recording sampling frequency
This shows the file recording sampling frequency.
44.1kHz, 48kHz or 96kHz
5Elapsed recording time
The elapsed recording time of the file appears as hours: minutes:
seconds.
6Number of recording channels
This shows the number of recording channels in the file.
ST or MONO
7Auto tone function status
This icon shows whether the auto tone function is on or off. (See
“Using the auto tone function” on page 51.)
No icon Auto tone off
Auto tone on
8Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
09 Recording standby or Recording paused
0Recording
Self-timer recording activated
9Input source
This icon shows the input source.
Indicators
(examples) Meaning
/ / / Mono recording mode input source
/ Stereo recording mode input source
/
Dual recording mode input source and
gain setting for the second recording (0
to –12)
4-channel recording mode input source
0Recording level meters
These show the levels of the input audio.
The bmark at the –12dB position provides a guide when
adjusting the input levels.

18 TASCAM DR-60DMKII
2 – Names and functions of parts
qFile name
This shows the file name that is automatically assigned to a
recording file.
This shows the project name when there are multiple files
recorded in 4-channel recording mode or dual recording mode.
wRemaining recording time
The remaining recording time on the SD card is shown in hours:
minutes: seconds according to the recording mode, sampling
frequency and recording format settings.
eLow cut filter status
This shows whether the low cut filter is ON/OFF. (See “Using the
low-cut filter” on page 39.)
This icon is shown as light letters on a dark background if the
low-cut filter is set to 40 Hz, 80 Hz or 120 Hz for channel 1, channel
2 or channels 3/4.
: Low cut filter off
: Low cut filter on
rLimiter function status
An icon appears if the limiter function setting for channel 1, 2 or
3/4 is set to MONO or LINK . (See “Using the limiter” on page 38.)
: Limiter off
: Limiter on
tSLATE button setting
This shows the SLATE button setting (enable/disabled).
(See “Adding slate tones”on page 52.)
: SLATE button disabled
: SLATE button enabled
yPeak value in decibels (dB)
Peak input level values are shown digitally.
Menu item list
Press the MENU button to open the MENU screen. The items in this
menu are as follows.
Menu item Function Pages
REC MODE Set the recording
source.
page 39, page 40,
page 42, page 44
INPUT SETTING Make input settings. page 36, page 38,
page 39
REC SETTING Make recording
settings
page 30, page 32,
page 48, page 50,
page 51, page 52
AUTO REC Make auto recording
settings. page 46, page 49
PLAY SETTING
Make play area,
repeat playback and
jump-back settings.
page 58, page 61
BROWSE SD card file and folder
operations
page 54, page 59
page 60
OTHERS Show submenu items.
page 26, page 36,
page 74, page 78,
page 79

TASCAM DR-60DMKII 19
2 – Names and functions of parts
The OTHERS submenu appears when OTHERS is selected in the
MENU screen. The menu items contained are as follows.
Submenu item Function Pages
INFORMATION Information about the file, SD card,
and system page 74
FILE NAME File name settings page 78
DATE/TIME Date and time settings page 26
REMOTE
Settings for the TASCAM RC-3F
footswitch and TASCAM RC-10
wired remote control (both sold
separately)
page 79,
page 80
SYSTEM Various system settings page 76
CAUTION
• When in recording standby or recording, only the
INPUT
SETTING and AUTO REC screens are shown.
• When recording, the
AUTO REC setting cannot be changed.
Using menus
Use the MENU screen to make various settings.
1. Press the MENU button to open the MENU screen.
2. Turn the DATA dial to select a menu item (highlighted), and
press the DATA dial or /button to move to various settings
screens.
Example: PLAY SETTING screen
3. Turn the DATA dial to select a menu item (highlighted) to be
set.
Example: AREA is selected.

20 TASCAM DR-60DMKII
2 – Names and functions of parts
4. Press the DATA dial or /button to move the cursor to
highlight the value of the setting.
5. Turn the DATA dial to change the setting.
6. Press the DATA dial or .button to set a different item in the
same menu.
This enables you to select a new item. Turn the DATA dial again
to select an item to be set.
7. Repeat step 3to 6as necessary to set each item.
8. To open the MENU screen (or OTHERS submenu screen), press
the MENU button.
To return to the Home Screen, press the Stop (8) [HOME]
button.
Basic operation
Use the following buttons to operate the various screens.
MENU button:
Opens the MENU screen.
Stop (8) [HOME] button:
When any other screen is open, press this to return to the Home
Screen. Use this to answer“NO” to a confirmation message.
DATA dial:
Turn the DATA dial to select items and change values on setting
screens. You can also turn the DATA dial to change the file
playback position.
Press the DATA dial to confirm items selected on setting screens
and to answer“Yes” to confirmation pop-up messages.
Press the DATA dial during recording to add a mark manually.
(See“Adding marks manually to a recording” on page 49.)
While pressing and holding the DATA dial, press the .button
to jump to the previous mark or press the /button to jump
to the next mark. (See “Moving to a mark position”on page 49.)
/button:
Use this to move the cursor (the highlighted area) to the right on
the screen, and to open folders on the BROWSE screen.
.button:
Use this to move the cursor (the highlighted area) to the left on
the screen, and to close folders on the BROWSE screen.