Taylor Turbo Charge 8752 Installation guide
Quit
Main
Controls Operating Procedures Troubleshooting QuizParts
The purpose of this training program is to inform
operators on the importance of product safety
and quality, while also reducing the number of
nuisance service calls generated from innocent
operator error. After completion of this program,
operators should have a good understanding of
the machine’s parts, controls, and operational
procedures.
Please refer to the Operator’s Manual for
complete instructions on using and maintaining
your Taylor freezer.
Course Content
Quit
Main
Controls Operating Procedures Troubleshooting QuizParts
Controls
Controls
Mix Low Indicator
When the MIX LOW indicator is
flashing, the mix tank has a low
supply of mix and should be
refilled as soon as possible.
Note: Foam in the mix, or on
the mix sensors, may create
erroneous mix level conditions.
The machine will continue to
operate during a MIX LOW
condition.
Quit
Main
Controls Operating Procedures Troubleshooting QuizParts
Controls
Controls
Mix Out Indicator
When the MIX OUT indicator is
flashing, the mix tank has an
insufficient supply of mix to
operate the freezer. The AUTO
mode is locked out and the freezer
shuts down.
To begin operation, add mix to the
tank and press the AUTO key.
Note: Foam in the mix, or on the
mix sensors, may create
erroneous mix level conditions.
This manual suits for next models
1
Table of contents
Other Taylor Commercial Food Equipment manuals
Taylor
Taylor 358 User manual
Taylor
Taylor 444 User manual
Taylor
Taylor Wawa C708 User manual
Taylor
Taylor 8664 User manual
Taylor
Taylor C850 User manual
Taylor
Taylor C300 NP User manual
Taylor
Taylor C722 User manual
Taylor
Taylor 490 User manual
Taylor
Taylor C712 Installation guide
Taylor
Taylor C602 User manual
