Taylor 5703 User manual

Outside
Facing Panel
Specifications
!Calculates Body Mass Index (BMI) based on weight and user-
entered height
!Weight Capacity: 400 lbs or 180 kgs or 28 st 8 lbs
!Weight Graduation: 0.2 lb or 0.1kg or ¼ Lb
!Height Range: 3'0” - 7'0” (90 - 215 cm)
!Measures weight and BMI simultaneously in about 10 seconds
!Weight-only feature with automatic step on
!Data can be stored for up to 4 individuals
!User selectable units of measure (lb / feet), (kg / cm) or (st / feet)
!Low battery indicator
!Operates on 1 lithium battery (included)
Why it is important to monitor your Body Mass Index (BMI):
Maintaining proper weight is essential to healthy living. Obesity
has been linked to a higher risk of heart disease, diabetes and
some forms of cancer. The Body Mass Index (BMI) is calculated
from a person's weight and height, and is a widely accepted
measurement of weight by most.
Always consult a physician before beginning any diet or exercise
program.
How Taylor's BMI Scale Works:
The scale will calculate your BMI based on your height and weight.
Once you input your height into the scale and step on the platform,
the scale will display your weight and your BMI number. A 16-point
bar graph will rank your BMI results as “Under”, “Normal”, or
“Over” recommended BMI levels for your height and weight.
Thank you for purchasing a Taylor® Precision Product. Your Taylor®
Scale is an example of superior design and craftsmanship. Please
read this instruction manual carefully before use. Keep these
instructions handy for future reference.
Precautions
Lifetime Warranty
1. OVERLOAD WARNING: remove the weight immediately when the
scale displays “Err”; otherwise, permanent damage to the scale will
occur.
2. “C” display indicates an Initialization error with incorrect
measurement. To correct, step off the platform and allow the display
to turn off. Then step on the scale again and remain still while the
scale computes.
3. The product is intended for home / consumer use only; it is not
intended for professional use in hospitals or medical facilities.
4. Do not disassemble the product. Other than replacing the battery, it
contains no user serviceable parts.
5. Clean after use with a lightly dampened cloth. Do not use solvents or
immerse the product in water.
6. Your scale contains sensitive electronic parts. Avoid rough treatment.
Do not drop, kick, or jump on it. Treat it with care to ensure the best
performance.
7. Do not store the scale where you store cleaning chemicals. The vapors
from some household products may affect the electronic components
of your scale. Do not store the scale on its side.
8. This scale is a sensitive weighing device. To prevent run down of the
battery, do not store anything on the scale.
9. Do not dispose of batteries in fire. Batteries may explode or leak.
Remove the battery if the scale will not be used for a long period of
time.
This scale is warranted against defects in materials or workmanship for the life of the
original purchaser from date of retail purchase. It does not cover damages or wear resulting
from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair.
Do not return to retailer.
Should this scale require service (or replacement at our option) while under warranty, please
pack the item carefully and return it prepaid, along with store receipt showing date of
purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada del Sol, Suite A
Las Cruces, New Mexico 88001 USA
There are no expressed warranties except as listed above. This warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
For additional product information, or warranty information in Canada or elsewhere outside
the USA, please contact us through www.taylorusa.com.
© 2008 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor®
and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products
and its affiliated companies. All rights reserved.
Made to our exact specifications in China.
Not legal for trade.
www.taylorusa.com
Instruction Manual
Body Mass Index
(BMI) Scale
Leading the Way in Accuracy®
5703 07.08
5703

Weight Only Operation To Measure Weight and Body Mass Index (BMI)
Your Taylor® Body Mass Index Scale will operate as a basic weight-
reading scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may
simply step on the scale to obtain your current weight. Please read
the following section for additional directions regarding weight-
only operation.
1. Your scale has been set at the factory to measure in pounds and
inches/feet (Lb-feet). On the bottom of the scale, there is a slide switch
that can change the measurement units to kilograms/centimeters or
stone/feet-inches. If you wish to change the measurement units, move
the switch to (kg-cm) or (st-feet). If necessary, use a small tool which
will not damage the scale.
2. Place the scale on a flat, hard surface. Carpeted
or uneven floors may affect accuracy.
3. Step onto the scale platform and remain still.
The display will show “0” running from left to
right while it computes your weight.
4. Your weight will appear on the display (LCD).
5. The scale will automatically turn off.
To enter your height into memory:
1. Press and hold the (SET) button for 2 seconds to
enter Body Mass Index mode. Memory number 1
will appear on the screen.
1. While the scale is off, press either the por q
button to enter BMI Calculation mode. Press p/
qagain to scroll to the memory number where
your height is saved.
2. Press (SET) to confirm the memory selection.
3. The scale will first display your height data. Wait
for the display to show “00”, then step on the
platform and stand still. The scale will show a
moving “0“ pattern while it computes your weight
and BMI.
2. Press p/ qbutton to scroll to the desired memory
number.
3. Press (SET) to select the memory number displayed.
The height digits will appear on the screen.
4. Press p/ qbutton to increase / decrease the
height digits. Press and hold the button to advance
the digits quickly. Note: if the scale is set to weigh in
pounds or stones, the height will display in feet (')
and inches (“). If the scale is set to weigh in
kilograms, the height will be in centimeters (cm).
5. Press (SET) button to confirm displayed height.
“SET” appears on the display and the scale turns
off automatically. Your height is saved into memory.
IMPORTANT: The scale needs to be initialized after battery
installation. The scale may also need to be initialized if it is moved or
bumped. At all other times, you may step directly on the scale
for a weight reading.
To initialize the scale, simply press lightly on the scale platform. The
display will show “----“ and automatically turn off. Your scale is now
ready for use.
IMPORTANT: The scale needs to be initialized after battery installation.
The scale may also need to be initialized if it is moved or bumped. At
all other times, you may directly proceed with the following
instructions for programming your height into memory.
To initialize the scale, simply press lightly on the scale platform. The
display will show “----“ and automatically turn off. Your scale is now
ready for use.
Running Zeroes
Description of Parts
Battery Installation and First Time Setup
1. Some models have a static cling label on the lens to prevent scratching.
Please remove before use.
2. This scale operates on one CR2032 lithium battery (installed). There is a
red strip under the Lithium battery cover to prevent battery drain in
shipping. Please remove the strip before continuing with these
instructions.
3. Open the battery compartment on the bottom of scale by pushing the
tab in direction of the “open ” arrow and lifting up the cover.
4. Remove the old battery from the compartment.
5. Place the new battery with the “+” signs up into the battery
compartment.
6. Close the battery compartment cover.
7. The scale needs to be initialized before first use or after battery
replacement. Press lightly on the scale platform. The display will show
“----“ and automatically turn off. Your scale is now ready for use.
8. Replace the battery when “Lo” is displayed, or if readings become dim
or irregular.
9. Remove the battery if the product will not be used for a long time.
SET
Enter Body Mass Index (BMI) mode.
Confirm button for height value
(Down / Up)
Change height values
Select user memory
Inside
Running Zeroes
BMI Display Graph
and number
To Program Your Height Into Memory
In order to measure body mass index (BMI), you must first save your
height into one of the scale's memory numbers. The scale uses this as a
factor in BMI calculations. Your height will be stored into memory for
future use, thus eliminating the need to enter it before each reading.
Note: if you did not enter your height data before stepping on the scale,
the display will show “----“ and then turn off. To obtain a BMI reading,
follow the steps in the preceding section “To program your height into
memory”.
General Information about Body Mass Index
1. Maintaining proper weight is essential to healthy living. Obesity has been
linked to a higher risk of heart disease, diabetes and some forms of
cancer. The Body Mass Index (BMI) is the most widely accepted
measurement of weight according to health professionals.
The Taylor “BMI Display Graph” which appears on the LCD screen is
divided into a 16-point bar chart.
“Under” range = First 5 bars; correspond to BMI numbers
<= 14, 15, 16, 17, 18.
“Normal” range = Middle 6 bars; correspond BMI numbers
19, 20, 21, 22, 23, 24.
“Over” range = Last 5 bars; correspond to BMI numbers
25, 26, 27, 28, >= 29.
Anyone, male or female, with a BMI of 25 to 29 is considered over weight and a
body mass index of 30 is considered obese. Remember to eat right and
exercise.
2. It is recommended to measure BMI or weight at the same time period daily.
3. Use this product without clothing for best accuracy. Clothes can vary in
weight and affect calculations.
4. For best results, choose a consistent time to use this scale, such as in the
morning.
4. Your weight appears in the center of the display.
Your BMI number appears in the lower right of the
screen. The Taylor “BMI Display Graph” appears
at the bottom of the screen. This graph ranks your
general condition: Under, Normal, or Over. See
the section “General Information about Body Mass
Index” for recommended levels.
5. Your weight and BMI information will display for 5
seconds, and then the scale will turn off
automatically.
6. NOTE: You have approximately 30 seconds to complete each
programming step. If no buttons are pressed within 30 seconds, the
scale will turn off automatically to conserve battery power. If this
occurs, simply repeat the programming steps above.