Teac DV228 User manual

DV228

purchaser's
except cabinet, front panel, knob, removable accessories
owner's
of TEAC

cabinet getting hit.
damage to the unit, please
Where the main plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
skin or eyes
Do not place the player in the following positions:z
emitting
Reads picture CDs to display a photo slideshow.
cause
high quality sound
options.
Various display options available for different screens and video chapter
navigation.
If the air humidity is very high, don't put the unit in dusty places.
Collected dust may cause the unit to fail.
Don't place the DVD player on beds, sofas, rugs or similar places
where ventilation and heat dissipation is easily blocked.
extend
containers

USB playback supported file formats: JPEG, MP3, WMA, AVI
USB PORT

DV228
V-MODE
CLEAR
SLOW
STEP
DEFAULT
USB COPY
-
+
ACCESSORY LIST
connections
a. For a basic composite AV connection, use AV cables with RCA plugs. Connect the yellow plug to the video jack, the white plug to the
white audio (L) jack, and the red plug to the red audio (R) jack.
b. For a component AV connection, use the YPbPr jacks.
c. To use S-Video, the TV must also have an S-video input jack. Use a S-Video cable to connect both devices.
d. To use digital sound output, use a coaxial audio cable to connect to the COAXIAL audio output jack.

NOTE: If a USB flash drive is connected while no disc is loaded in the player, the player will read the USB drive automatically and start file playback.

During disc playback, press the OSD key on the remote control to
view the following information displays:
Press the FWD key to fast forward playback and cycle through
the following speeds: 2x, 4x, 8x, 16x, 32x
Press the REW key to fast rewind playback and cycle through
the following speeds: 2x, 4x, 8x, 16x, 32x

The player will start looping playback from A-B.
Pressing the A-B key for the third time will cancel the looping playback.

To play media from a USB flash drive, connect the USB drive to the USB
port at the side of the unit. Press the USB/DVD button to enter USB
Mode. The player will read the drive and start playback automatically.
Press STOP to return to the file/folder view if you wish to choose a
different file or file type.
to start
press it again to switch the
sound back on.