Team C TS2 User manual

1:10 SCALE 2WD ELECTRIC PRO RACING TRUCK
All manuals and user guides at all-guides.com
all-guides.com

Notice
This manual is written in english language only. If you need a manual in your language please visit our
website or contact your distributor!
Diese Anleitung wurde in englischer Sprache verfasst. Sollten sie eine Anleitung in ihrer Sprache
benötigen, besuchen sie unsere website oder konaktieren sie ihren Vertriebsagenten.
Questo manuale è stato scritto in inglese. Se avete bisogno del manuale nella tua lingua, si prega di
visitare il nostro sito web o contattate il proprio distributore.
Este manual está escrito en Inglés. Si necesita el manual en su idioma, por favor visite nuestro sitio
web o contacte con su distribuidor.
Ce manuel est écrit en langue anglaise. Si vous avez besoin d'un manuel dans votre langue
s'il vous plaît visitez notre site web ou contactez votre distributeur!
Deze handleiding is geschreven in het Engels taal beschikbaar. Als u een handleiding in uw eigen
taal kunt u terecht op onze website of neem contact op met uw distributeur!
Thank you for purchasing this TS2 Competition Truck by Team C. This manual shows instructions and
tips to built and maintain your TS2. Please take some time to read through to get familiar with the shown
steps.
We continually improve our products, due to that, actual parts my be different to the illustrations.
Please check our website for the latest versions manuals and tips before you start to built this model.
Generall Information
THIS IS NOT A TOY!
Not suitable for children under 14 years of age without adult supervision.
This is a high performance vehicle, for safety reason don’t run on public streets, in crowded areas,
environmentally areas or near children or animals.
This model contains rotationg parts and parts which become hot during operation. Care must been
taken to avoid damage or injuries.
This product may require some assembly and routine maintance.
This product is covered by warranty based on material defectives. Crash damage or maintenance
failures are not covered under warranty.
Batteries should be used in good condition only, and need to be fully charged.
Nitro models should be driven outside of buildings only. Inhaling exhaust gases could cause health
damage.
Keep chemicals stored out of the range of small children.
Make sure your model and equipment is in perfect condition before you use it, to ensure savety
and fun while driving.
All manuals and user guides at all-guides.com

DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
反向开关
Transmitter Preparation
27MHzTransmitter Crystal （TX）
Transmitter crystal(TX)
Power Switch
ON
OFF
Antenna
Extend the antenna to the maximum
Length for best performance
The crystal can be replaced to change frequencies.
Note : You must also change receiver crystals!
Do not use AM crystals
Receiver crystal(RX)
Steering Trim
To be used for trimming the steering
operation
Throttle Trim
Steering Dual Rate
To be used to adjust steering servo throw
AA Alkaling Batteries
8X
Open battery cover at the bottom of transmitter.
Install batteries. Follow the direction of batteries
designated in the inside of battery box.
Transmitter Battery Installation
This switch is used for optional parts.
3ch Switch
Reverse Switch
Low Batteries(Light Blinks)
Good Batteries
Battery Level Indicator
Left turn Straight (neutral)
Right turn
Brake
Forward Stop(Neutral)
To be used for throttle operation
Throttle Trigger
Battery Cover
Servo Factory Settings
1
1
2
3
2
To be used for trimming the throttle
operation
3
4
4
All manuals and user guides at all-guides.com

Transmitter Preparation
Battery
A new Ni-MH battery must be charged before it is used.Refer to the charger instruction manual for charging.
Set up the radio control system as indicated below.
6
5
8
Servo
Receiver
Transmitter
10
4
Switch
7
9
Electronic Speed
Controller
Motor
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
11
2
ON
OFF
6
10
ON
OFF
5
8
1
3
Tools required
Needie Nose Pllers Awl Grease Screw Cement
Instant Glue
Hex Wrench
Differential Grease
Molybdenum Grease(Black)
Hex Wrench
Body Reamer
No need to pre-drill precise holes
(1mm to 15mm)can be drilled
Wire Cutters
Sharp Hobby knife
ROUND CUTTER
For trimming bodies!
Start
Finish
Install batteries.(Transmitter)
Extend the antenna.(Transmitter)
Connect the battery
Extend the antenna.(Reveiver)
Center the trims.
Switch on.(Transmitter)
Switch on.(Reveiver)
Make sure the servos are in command.
Switch off.(Reveiver)
Switch off.(Transmitter)
Retract the antenna(Transmitter)
1
8
7
2
5
3
4
6
9
10
11
H154
H162
H096
All manuals and user guides at all-guides.com

1
1Front Suspension
T02014
T02056 3x34.5
T02056 2.3
LR
T02056 3x34.5 Hinge pin front inner
………………………4
……2
T02056 2.3 E-ring
…………4
T02083 M3x15 Screw
T02092 Ball stud-Long
…………………2
TG2003
T02056 2.3
T02037
T02092
T02083 M3x15
TS2023
T02008
T02015
LR
Assemble Both Left And Right
2Front Suspension
All manuals and user guides at all-guides.com

4.0mm
T02043 4.0 E-ring
……………………1
…………………4
T02080 3x6x2.5 Ball Bearing
T02044 Block Carrier
T02044 M3x10 Screw
…………………………2
……………2
T02093 Ball stud-Short
……………………2
T02061 Ball stud-Silvery
…………………1
……………………2
T02044 3x7x0.8 Washer
T02043
T02043
T02043
T02043
T02043
T02080
T02080
T02061
T02080
T02080
T02023
T02023
T02023
T02044
T02044
T02093
T02024
2
T02044 3x7x0.8
3Buffer
4Buffer
All manuals and user guides at all-guides.com
all-guides.com

3
…………8
T02054 2.3 E-ring
T02093 Ball stud-Short
……………………………4
…………2
T02100 5x10x4 all bearing
………………………4
T02054 3x27.5 Hinge pin front outer
…………4
T02042 2x9.8 Shaft
…………2
T02042 4.0 E-ring
T02082 M3x10 Screw
……………2
T02082 M3x10
T02019
LR
LR
Assemble Both Left And Right
5Front Suspension
6Front Suspension
T02054 3x27.5
T02054 3x27.5
T02054 2.3
T02054 2.3
T02054 2.3
T02042 4.0
T02100 5x10x4
T02042
T02042 2x9.8
T02100 5x10x4
T02012
T02093
T02034
T02093
T02011
T02054 2.3
All manuals and user guides at all-guides.com

True-to -scale diagram
4
T02029 4.8mm Ball End-Long TG2024 3x68 Turnbuckle
…………8 ……4
Front Upper-Right
Front Upper-Left
Steering Tip
Assemble as many times as specified
……4
T02082 M3x10 Screw
…2
T02082 M3x22 Screw T02063 5mm Ball stud
……………………2
T02063
T02082 M3x10
T02082 M3x22
TG2005
Turnbuckle
Front Suspension
Front Suspension
Projection.Note direction
Projection.Note direction
Projection.Note direction
approx.51mm
approx.51mm
approx.46mm
TG2024
T02029
T02029
1:1
1:1
1:1
1:1
x2
x1
x1
x1
7
8
9
T02092
T02092
T02093
T02093
T02093
T02093
T02093
Ball stud sponge
Ball stud sponge
Ball stud sponge
Ball stud sponge
Ball stud sponge
Ball stud sponge
Ball stud sponge
All manuals and user guides at all-guides.com

Screw
Cement
Screw
Cement
Screw
Cement
Apply threadlocker(screw cement)
5
…………4
TS2022/TS2024 M3x10 Screw
…………4
TS2024 M3x12 Screw
…………4
TS2023 M3x8 Screw
TS2024 M3x12 Screw
………2
TS2024 M3x15 Screw
……2
TS2023 M3x10 Screw
………2
Front Suspension
Front Suspension
10
11
TS2024 M3x10
TS2022 M3x10
TS2024 M3x12
TS2022
TS2024
TS2023 M3x8
TS2024 M3x12
TS2023
TS2023
TS2024 M3x15
TS2024
TS2023
TS2023 M3x10
TS2023 M3x8
TS2024
All manuals and user guides at all-guides.com

6
…………6
T02082 M3x10 Screw
T02092 Ball stud-Long
…………………2
…………4
T02082 M3x10 Screw T02092
T02082 M3x10 T02018
………………2
T02083 M3x8 Screw
…………2
T02055 3x48 Hinge Pin Rear Inner
T02083 M3x8
T02055
TG2004
T02009
T02014
T02014
Front Suspension
Rear Suspension
Assemble Both Left And Right
Rear Suspension
后悬吊系统
12
13
LR
LR
14
T02082 M3x10
T02082 M3x10
TS2020
All manuals and user guides at all-guides.com

7
T02007 M2.5x25 Screw
…1
T02048 2.37mm Ball
……………………12
T02098 5x8x2.5 ball bearing
T02007 M2.5 Nylon Nut
……………2
……………1
T02099 10x15x4 ball bearing
………2
2.37钢珠
T02049 17x23x1 Washer
……2
T02007 2.5x25
T02098 5x8x2.5
T02099 10x15x4
T02099 10x15x4
T02007
T02007 M2.5
T02047
T02046
T02046
T02098 5x8x2.5
T02049 17x23x1
T02049 17x23x1
T02048 2.37
T02004
T02050 2.6x6x3
……………4
T02083 M3x10 Screw
T02083 M3x10
15 Rear Suspension
16 Differential
Apply Grease
All manuals and user guides at all-guides.com
all-guides.com

Apply Grease Apply threadlocker(screw cement)
Screw
Cement
Screw
Cement
approx.18mm
T02100 5x10x4 Ball bearing
………………4
T02051 5x16.8 Idler gear shaft
T02041 5x8x6.7 Top shaft spacer
……………1
………………1
…………1
T02082 M3x12 Screw
………4
T02082 M3x25 Screw
T02084 M4 Flanged Nylon Nut
……………1
T02082(3x12)
T02006
T02006
T02100
T02100
TS2031
T02100
T02100
T02052
T02041
T02051
T02082(3x25)
T02082(3x25)
T02036
T02084
T02040
T02039
T02039
T02038
T02038
TG2001(86T)
8
Transmission
Motor Mount
Spur Gear
<Right>
<Left>
17
18
19
Screw
Cement
All manuals and user guides at all-guides.com

9
Tighten the screws with one sheet of paper
inserted between both gears.
T02081 3x7x0.8 Washer
T02083 M3x8 Screw T02082 M3x5 Screw H479 M3x3 Screw
………………2
……2 …………1
………2
T02082 M3x10 Screw
……………2
………………2
T02083 M3x8 Screw
T02081 3x7x0.8 T02082 M3x5
H479 M3x3
T02083 M3x8
H479
T02005
T02005
T02083 M3x8
T02082 M3x10
Motor
Rear Suspension
20
21
All manuals and user guides at all-guides.com

10
…………6
TS2025/T02082 M3x10 Screw
…2
T02082 M3x22 Screw
T02063 5mm Plastic Ball stud
……………………2
………………2
T02083 M3x8 Screw
T02063
T02082 M3x22
T02082 M3x10
T02082 M3x10
TS2025 M3x10
T02083 M3x8
T02026
TS2025
Rear Suspension
T02082 M3x22
<Right>
<Left>
………………2
T02034 2x9.8 Shaft T02100 5x10x4 Ball Bearing
………………4
TG2012
T02100
T02100
T02034
T02034
……………2
T02093
T02013
T02093 Ball stud-Short
Rear Suspension
Assemble Both Left And Right
22
23
LR
LR
All manuals and user guides at all-guides.com

11
T02057 3x30.5 Hinge pin Rear outer
…………4
…………2
T02057 2.3 E-ring
T02013 3.1x6x1 Plastic Washer
………………………4
Assemble Both Left And Right
Rear Suspension
Rear Suspension
T02093
T02093
T02029 4.8mm Ball End-Long
TG2024 3x72 Turnbuckle
…………4
…………2
T02029 T02029
TG2024
approx.53mm
Projection.Note direction
T02057 2.3
T02057 3x30.5
T02013
LR
LR
24
25
1:1 x2
Ball stud sponge
All manuals and user guides at all-guides.com

……………………4
………………………8
TG2013 / TG2014 2.3 E-ring
T02096 Shock Piston
………………4
T02097 2.8x1.9 O-ring
…………………8
T02097 3.1x1 Plastic Washer
T02062 5.8x6 Ball stud
T02031 5.8 Ball End
…………………4
………………………4
TG2025/TG2026 8x1 O-ring
Shock Absorber
TG2013
Put a little oil
TG2014
T02096
TG2013
TG2013
TG2014
TG2014
T02096
…………………4
Silicone Oil
Shock Absorber
Front-Short
Rear-Long
Put a little oil
Front-Short
Rear-Long
Front-Short
Rear-Long
12
Assemble as many times as specified
T02097(2.8x1.9)
T02097(3.1x1)
T02062
T02031
T02031
TG2025/TG2026
T02073
T02097(2.8x1.9)
T02097
TG2026
TG2026
T02067
T02097(2.8x1.9)
T02097(3.1x1)
T02097(2.8x1.9)
T02097
TG2025
TG2025
TG2025
T02062
T02031
26
27
x2 x2
x2 x2
x2
x4
All manuals and user guides at all-guides.com
all-guides.com

13
Compress the spring and install
TG2017
TG2018
T02082 M3x15 Screw
……2
T02084 M3 Nylon Nut
………………2
Front-Short
Rear-Long
Shock Absorber
Assemble as many times as specified Assemble Both Left And Right
Front Suspension
TG2025/TG2026 12x1 O-ring
…………4
for adjusting the spring tension
TG2025/TG2026
T02031
T02031
x2
x2
28
LR
x2 LR
29
x4
T02082 M3x15
T02084 M3
All manuals and user guides at all-guides.com

14
T02082 M3x15 Screw
……2
T02084 M3 Nylon Nut
……………2
T02084 M3
T02082 M3x15
Assemble Both Left And Right
Rear Suspension
Rear Suspension
LR
LR
30
31
…………6
TS2022/TS2008 M3x10 Screw
…………6
TS2025/TS2026 M3x12 Screw
TS2022 M3x10
TS2022
TS2025 M3x12
TS2025
TS2026 M3x12
TS2026
TS2026
TS2008
TS2008 M3x10
All manuals and user guides at all-guides.com

15
T02030 4.8 Ball End-Short
……………2
T02030 M3x10 Screw
……………1
T02081 3x7x0.8 Washer
………………4
T02082 M3x8 Screw
…………4
…………………1
SANWA
T02035 1.5 Servo spacer
……2
T02030
T02027
T02028
T02061
T02081
T02035
T02082(2.6x8)
Steering Servo-H(24T) Steering Servo-S(23T)
Select for your servo
Sanwa servo T02028
T02082 M2.6x8 Screw
…………1
Steering Servo-F(25T)
T02061 Ball stud - silvery
T02082
…………2
TS2025 M3x12 Screw
…………4
TS2025 M3x10 Screw
X
Steering Servo-F(25T)
32 Rear Suspension
33 Steering Servo
XMust be purchased separately
X
TS2025 M3x10
TS2025 M3x12
All manuals and user guides at all-guides.com

Must be purchased separately
X
16
………………2
T02083 M3x8 Screw
T02087
T02087
Electronic speed controller
Receiver
Double-sided Tape
Steering Servo
Receiver/Electronic speed controller
……………………1
TS2020 M3x5 Screw
TS2020
T02083 M3x8
34
35
X
X
All manuals and user guides at all-guides.com