Technaxx TX-29 User manual

1
Technaxx®* User Manual
Security Premium Camera Set 10.1 TX-29
Security Premium Camera Set 18.5 TX-30
Important Hint regarding the user manuals:
All languages of the user manual are on the CD enclosed.
Warranty 2 years
Contents
1 Features............................................................................................................................2
2. Package content..............................................................................................................3
3. Product Overview.............................................................................................................3
4. Installation........................................................................................................................6
4.1 How to install TX-29 & TX-30.........................................................................................7
4.2 Antenna installation........................................................................................................7
4.3 Hard disk installation......................................................................................................8
4.4 Add camera to TX-29/TX-30..........................................................................................9
5. Software Functions........................................................................................................10
5.1 Split screen..................................................................................................................10
5.2 Video Manage..............................................................................................................10
5.4 Video playback.............................................................................................................15
5.5 Video backup...............................................................................................................20
5.6 Color adjust..................................................................................................................21
5.7 PTZ control (not for included cameras)........................................................................21
5.8 Manual record..............................................................................................................22
5.9 Volume.........................................................................................................................22
5.10 Setup Wizard.............................................................................................................22
5.11 Fast network...............................................................................................................22
5.12 Add Camera...............................................................................................................22
5.13 Exit System................................................................................................................22
6. Device Access ...............................................................................................................23
6.1 Access via LAN (local WEB Interface).........................................................................23
6.2 Access via WAN ( global WEB Interface).....................................................................24
6.3 Mobile application (Security Premium).........................................................................25
7. Security Premium PC Client ..........................................................................................29
8. Advanced camera settings.............................................................................................32
9. Troubleshooting.............................................................................................................32
10. Specifications...............................................................................................................33
11. Attachment...................................................................................................................34

2
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device,
to which this user manual belongs, complies with the essential requirements of the
standards referred to the Directive R&TTE 2014/53/EU. The Declaration of Conformity you
find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using
the device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks). Free Email: s[email protected]
If you drill a hole in the wall, please make sure that power cables, electrical cords and/or
pipelines are not damaged. When using the supplied mounting material, we do not take the
liability for a professional installation. You are entirely responsible to ensure that the
mounting material is suitable for the particular masonry, and that the installation is done
properly. When working at higher altitudes, there is danger of falling! Therefore, use
suitable safeguards.
Security Premium Camera Set 10.1" TX-29
Security Premium Camera Set 18.5" TX-30
1. Features
Recorder & Receiver & Monitor in one device Wireless transmission with 2.4GHz via
Plug & Play HD LCD monitor screen HD camera video resolution 1280x720 (720P)
Built-in camera microphone for audio recording PIR sensor with ~8m distance at day &
night Push message via APP when motion is detected Wireless camera connection with
up to 4 cameras (TX-29) & up to 8 cameras (TX-30) Windows split-screen function with
real-time/routine/event surveillance Hard disk storage function & USB backup function
Network operation via LAN cable connection Mobile viewing via free iOS & Android APP
(Technaxx Security Premium) Easy monitoring via PC (PC Client software) Worldwide
PC access (DDNS) [www.technaxxp2p.de] IP66 camera protection class against waterjet
& dust Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old devices
or batteries into the domestic waste. Cleaning: Protect the
device from contamination and pollution (use a clean drapery).
Avoid using rough, coarse-grained materials or
solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH &
Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany

3
2. Package contents
TX-29: Monitor with Stand, AC/DC Adapter 12V/2A, Wall bracket & screws & dowels, HDD
bracket & screws, Antenna, Outdoor Camera with AC/DC Adapter 12V/1A, Wall bracket &
screws & dowels, Antenna, Waterproof end cap, General: USB Mouse, Network Cable
(2m), CD, User Manual, [*HDD not included]
TX-30: Monitor with Stand, AC/DC Adapter 12V/3A, Wall bracket & screws & dowels,
Antenna, Outdoor Camera with AC/DC Adapter 12V/1A, Wall bracket & screws & dowels,
Antenna, Waterproof end cap, General: USB Mouse, Network Cable (2m), CD, User
Manual, [*HDD not included]
3. Product Overview
The main use of the device is local on the display. The TX-29 & TX-30 are recorder,
receiver and display in one device. They can be used for example as surveillance device.
TX-29 supports up to 4 cameras, TX-30 supports up to 8 cameras. Both need a HDD (not
included) for recording and push notifications. The devices are supported by a local and a
global WEB interface as well as a APP which is available for Android and iOS (Security
Premium).

4
TX-29
TX-30
No.
Name
Function
1
AUTO key
Adjusts the screen display automatically.
2
MENU key
Activates and exits the OSD menu settings of the display (monitor)
3
← key
Moves the OSD menu or decreases the selected item value or
decrease volume of the display (monitor).
4
→ key
Moves the OSD menu or increases the selected item value or
increase volume of the display (monitor).
5
Screen key
Turn on/turn off the display screen.(monitor)
6
LED
Indicator
The power LED lights up green when the display screen is turned on.
The power LED lights up red when the display screen is turned off.
7
HDMI
connector
HDMI output signal can be connected to another HD monitor for
displaying.
8
Net
For a wired connection, connect this to a spare port on your home
router (without this connection no access over the internet).
9
USB Ports
USB 2.0 Ports for mouse & external device(USB disk)
10
Power
socket
Connect the power adapter here.(DC12V/2A or DC12V/3A)
11
Power
On/Off
Turns ON/Off the monitor (only TX-30)

5
IP Camera:
No.
Name
Function
1
IR (Infrared) LEDs
The camera will use these in low-light conditions to generate a
black and white image, even in total darkness.
2
Lens
The business end of the camera. For a reliable and clear
image, ensure that the lens stays clean and unobstructed. To
clean, use a dedicated lens cleaning solution and cloth,
available from all good photography stores. (viewing angle:
H:57.4° V:42.8°)
3
Light Sensor
Detects the amount of light available and turns on the IR LEDs
when necessary.
4
Mounting bracket
The supplied mounting bracket can be screwed onto any flat
surface.
5
Power socket
Connect the power adapter here.(DC12V/1A)
6
RJ45 Ethernet
connector
For a wired connection, connect this to a spare port on your
home router. It’s recommended to use wired connection when
the distance between monitor and camera is beyond the
wireless transmission range.
7
Antenna
The included antenna connects here.
8
Housing
Made of metal. Protects the internal technique from weather.
9
Microphone
Allows the camera to pick up nearby sounds, and stream them
with the video.
10
PIR (Passive
infrared) Sensor
This is an electronic sensor that measures infrared light
radiating from objects (human body) in its field of view.
(viewing angle: H:120° V:60°)

6
4. Installation
Figure 4-1
1
DC12V/1A
6
Computer
2
AC Wall Socket
7
Internet
3
DC12V/2A/3A
8
Smartphone
4
USB Mouse
9
Router
5
RJ45 Cable
Safety cautions
• Make sure product is fixed correctly and stable if fastened in place.
• Do not operate if wires and terminals are exposed.
•Do not put a container with liquid near X-29 & TX-30 (like vase).
•NVR should put at a ventilation place, and prevent clogged the ventilation hole.
•Check the power voltage, in case if damage by wrong voltage.

7
4.1 How to install TX-29 & TX-30
See figure 4-1 above and follow the steps below.
①Plug in the included USB mouse to one of the USB connector.
②Connect the output of the supplied 12V power adapter into the power socket on the
NVR.
③Plug the power adapter into the wall socket.
④Connect the output of the supplied 12V power adapter into the power socket on the
Camera.
⑤Plug the power adapter into the wall socket.
Wait for a few minutes till the TX-29/TX-30 and the IP camera finished startup. So far, the
local surveillance system was done.
⑥If you want to remote access this system with a Smartphone or computer, you should
connect the TX-29/TX-30 to your home wireless router with a RJ45 network cable and
make sure the router has been linked to internet. For Smartphone installation see chapter
6.3 Mobile application (Security Premium).
4.2 Antenna installation
Use a clockwise motion to connect the antenna. Make sure the antenna is connected firmly
but not excessively. You can adjust antenna horizontal or vertical direction to get best
reception.
Monitor
Camera

8
4.3 Hard disk installation
Note: Select HDD (See chapter 11. Attachment) and suitable for devices. HDD needs to be
formatted manually for normal recording. HDD is needed for recording (Time, Motion,
Sensor), playback of recordings, saving log files and sending out Push Notifications.
TX-29 (HDD has to be 2.5 inch, max. 4TB)
1. Remove the screws of
the device back cover.
2. Combine the HDD bracket
and HDD with screws.
3. Connect the data and
power cable.
4. Fix HDD to the device
mid-plate with screws.
5. Fix the back cover with
screws.
TX-30 (HDD has to be 3.5 inch, max. 4TB)
1. Remove the HDD cover.
2. Put in the HDD
3. Fix HDD with screws
4. Connect the data and
power cable.
5. Place the HDD cover
back on.
6. Fix the HDD cover with
screws.

9
4.4 Add camera to TX-29/TX-30
The included camera in the kit have been paired with NVR at the factory, no need execute
this operation. If you want to add more cameras to NVR, follow the below steps:
1
DC12V/1A
4
USB Mouse
2
AC Wall Socket
5
RJ45 Cable
3
DC12V/2A/3A
①Connect a new IP camera to the NVR with a network cable, then power the IP camera
on, wait for about 1 minute.
②Click the mouse right button on the main interface and click “Video Manage”Select
the protocol “N1” and press “refresh”->select the camera in the search list and press “Match
code”and answer with yes.
Note: Match code only works with cameras of the TX-29 or TX-30 system (additional
cameras).
③After about 30 seconds the new camera will be occurred in the “added device” list, and
status displays ”Connect success”. Now the camera is connected via WIFI with the NVR,
④After the camera has successfully connected with the NVR either connect more
cameras or unplugs the network cable from the camera and plug it back into the router or
NVR depending which network cable you used
⑤Now you can place the camera up to 40m (open field) away of the NVR. It is also
possible to use the repeater function of the camera if you have at least two cameras. For
repeater function see chapter 5.2 Video Manage.
Note: It is also possible to connect the camera and NVR by network cable to the router or
the same network. The camera should be nearby the router. When you have set this up you
can go on with step ②above.

10
5. Software Functions
Following operations can be seen by clicking the right button of the mouse on the display
monitor.
5.1 Split screen
To change the number of views on the monitor right clicks on the monitor with the mouse.
Select: x1 = 1 channel view, x4 = 4 channel view, x6 = 6 channel view, etc.
5.2 Video manage
Select the camera from the upper list you want to add. See chapter 4.4.
Protocol
There are three different protocols to select Standard, N1 and ONVIF.
Standard: Shows mostly all IP cameras that are connected to the
network after pressing refresh.
N1: Shows the IP cameras of the TX-29 & TX-30 system that are not
connected to NVR (WiFi: But have already matched to NVR) after
pressing refresh. IP cameras that have matched via WiFi with NVR
can only connect to one NVR (TX-29 or TX-30). IP cameras that are
connected over the Ethernet cable to the network can be connected
to more than one NVR.
ONVIF: Shows all the IP cameras with activated ONVIF protocol after
pressing refresh
Refresh
Search IP CAM information. The list will be updated.
Match Code
Is for adding new IP cameras to the NVR, the NVR and the IP camera
need to match together via the password key process. After that we
can connect the wireless NVR device.
Auto Add
All cameras you see in the list will be added automatically, when the
network connection of the cameras are under good condition.
Modify
Select a camera from the search list. You can edit the IP Address of
the selected camera, Username & Password.