TECLOCK SSC-650P User manual

User’s Manual
Bluetooth Digital Pitch Caliper
Type : SSC-650P/650E/650C
Features
➢Measuring easily Pitch hole to hole or Pitch edge to hole
➢Resolution ：0.01mm
➢Wireless communication ：Bluetooth
1
Flat plate Cone
Q-148-1-E ver1.1

Description
2
■Measuring Pitch hole to hole or Pitch edge to hole
Flat plane cone
Dimensions
Edge to Hole
plane cone
Unit : mm
Dimensions
Unit : mm
■Measuring Pitch edge to hole
Flat plane
Cone
Cone
■Measuring Pitch hole to hole
Dimensions
Unit : mm

Description
★Operation
①Button
There are two functions, Basic one and Advanced one.
②Button
In the case of measuring, Data transmission. In the case of setting, Data enter.
③Button
Preset by long press. In the case of setting, Data change.
④Serial communication（Bluetooth/RS232/USB）
It is able to transmit the measuring data and set the mode data by serial communication.
Transmission specification are 4800bps, 7 bits, even parity and 2 stop bits.
[1] Basic functions : MODE button⇒Short press( < 1 sec )
DATA
MODE
SET
3
★Measuring Pitch hole to hole
ワーク
Flat plane cone
Work
MODE
DATA
SET
set the preset value
Enter the preset
value
Short press
Long press
Bluetooth mode
reset pairing information
display the MAC address
Preset value
SSC-650P 10.00mm
SSC-650E 10.00mm
SSC-650C 20.00mm

[2] Advanced functions : MODE button⇒Long press( ≻1 sec)
(2) not available with Simple profile
(3) Active configuration displays first
[3] Switching off [4]Favorite setting : DATA button⇒Long Press( ≻1 sec)
SET button⇒Long Press( ≻2 sec)
[5] Replacing the battery
Act.
Deact.
4
Unit
mm
inch
Bluetooth Profile
Simple
Paired and Secure
HID
(1)Activation/Deactivation
Favorite setting
Power Off
Standby
Set “0.00”
Set DATA Mode
Set HOLD Mode
Set SET Mode
Set PRESET Mode

[6] Operation via Bluetooth
6.4. Bluetooth Connection :
1° Activate Bluetooth compatible software and hardware (Master: PC, Display Unit).
2° Start the instrument. By default the Bluetooth® module is active and the instrument is available for
connection (advertising mode).
3° If no connection is established during the advertisement period reactivate the Bluetooth® module
using the bt / On menu.
4° Instrument is ready to communicate (connected mode.)
6.5. Only with paired profile:
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), pairing information on the instrument must be
cleared using the bt/ rESEt menu.
6.6. Bluetooth® Specifications:
6.1. HID mode（External Key board mode）
①Set HID mode by Advanced function.
②Set BT On mode by Advanced function.
③Reset Bluetooth mode by Basic function.
④Pairing connection the instrument to the PC.
（Instrument name：S_Cal EVO HID）
⑤Send the measured data by the DATA button.
6.2.Pair mode
①Set Pair mode by Advanced function.
②Set BT On mode by Advanced function.
③Reset Bluetooth mode by Basic function.
④Pairing connection the instrument to the PC.
（Instrument name：SY295）
⑤Send the measured data by the DATA button.
6.3.Bluetooth configuration
Display status Operating mode
off Bluetooth disconnected
blinking Bluetooth advertising
on Bluetooth connected
reset : clear pairing information
MAC : display the MAC address
Simple : profile without pairing
Pair : paired and secured profile
HID : virtual keyboard
Items Specification
Frequency band 2.4GHz
Modulation GFSK
Max output power Class3(1mW)
Range
≦15m（open space），1-5m(industrial environment)
Version Bluetooth4.*
5

[7]仕様
[8]Maintenance
Carefully dry all mechanical parts of the instrument after contact with liquids to ensure proper
operation and avoid corrosion.
Don’t use aggressive products (alcohol, trichloroethylene or others) to clean plastic parts.
Don’t expose the instrument to direct sunlight, heat or humidity.
6
Items SSC-650P SSC-650E SSC-650C
Resolution(mm)
Measuring Range(mm) 5～150/10～150 10～150 20～150
Indication Error(mm) ±0.03 ±0.03 ±0.03
Repeatabirity(mm)
Max slider speed(m/sec)
Display refresh rate(times/sec)
Data output
Mean power consumption(μA)
Battery life
Woking temperature(℃)
Storage tempaerature(℃)
Weight(g) 235 265 300
Battery
Span(mm)
Fixed jaw Flat plane Cone Flat plane Cone
Slider jaw Flat plane Cone Cone Cone
45
about 6 months(general using)
5～40
-10～60
CR2032
258
0.01
±0.01
2.5
min 10
Bluetooth

[9]Description of Bluetooth® module:
This module is based on Nordic Semiconductor nRF8001 μBlue Bluetooth Low Energy Platform. The
nRF8001 is a single chip transceiver with an embedded baseband protocol engine, suitable for ultra-low
power wireless applications conforming to the Bluetooth Low Energy Specification contained within v4.0
of the overall Bluetooth specification. The nRF8001, used in the current revision of ISP091201, is a
product using a ROM for the baseband protocol engine.
[10]Certification
7
contains bluetooth module ISP091201D
Region Certification
USA FCC ID : 2AAQS-ISP091201
Canada IC : 11306A-ISP091201
Brazil Anatel : 0516-14-4534
Korea South MSIP-CRM-iNs-ISP091201
Mexico IFT : RCPSYIS14-0655
Japan 001-A06167
Taiwan CCAH18LP2040T6
EU
India WPC : ETA-1003/2-17-/RLO(WR)

CERTIFICATE OF CALIBRATION
We hereby certify that this product has been calibrated and found to be in accordance with the
applicable NATIONAL STANDARDS and TECLOCK STANDARDS, Equipment used in this calibration
has traceable accuracy to the NATIONAL LENGTH and FORCE STANDARD.
Notice for use
Be sure to conduct a routine check for this product according to the purpose of use before use. This
product is precision instrument, periodically considering frequency of use, environmental conditions and
method of use.
It is not guaranteed for the performance of this product, which has been repaired or disassembled by
other than TECLOCK.
For appearance and other design improvement, this products
subject to change without advance notice.
TECLOCK Corporation
TECLOCK SmartSolutions Corporation
http://www.teclock.co.jp
HEAD OFFICE
2-10-3 MARUTA-CHO, OKAYA-SHI, NAGANO-KEN 394-0042
PHONE:[phone], FACSIMILE:81-266-22-4914
E-mail:[email protected]