Teledyne T360 User manual

MODEL T360/T360M
CARBON DIOXIDE ANALYZER
Operation Manual
Also supports operation of:
T360U/GFC 7000E CO2 Analyzer
(when used in conjunction with T360U/GFC 7000E Addendum, PN 07273)
© Teledyne Advanced Pollution Instrumentation (TAPI)
9480 Carroll Park Drive
San Diego, CA 92121-5201
USA
Toll-free Phone: [phone]
Phone: [phone]
Fax: [phone]
Email: [email protected]
Website: http://www.teledyne-api.com/
Copyright 2011-2012 07272B DCN6552
Teledyne Advanced Pollution Instrumentation 13 December 2012

i
ABOUT TELEDYNE ADVANCED POLLUTION INSTRUMENTATION (TAPI)
Teledyne Advanced Pollution Instrumentation, Inc. (TAPI) is a worldwide market
leader in the design and manufacture of precision analytical instrumentation used
for air quality monitoring, continuous emissions monitoring, and specialty process
monitoring applications. Founded in San Diego, California, in 1988, TAPI
introduced a complete line of Air Quality Monitoring (AQM) instrumentation,
which comply with the United States Environmental Protection Administration
(EPA) and international requirements for the measurement of criteria pollutants,
including CO, SO2, NOX and Ozone.
Since 1988 TAPI has combined state-of-the-art technology, proven measuring
principles, stringent quality assurance systems and world class after-sales
support to deliver the best products and customer satisfaction in the business.
For further information on our company, our complete range of products, and the
applications that they serve, please visit www.teledyne-api.com or contact
[email protected]m.
NOTICE OF COPYRIGHT
© 2011-2012 Teledyne Advanced Pollution Instrumentation. All rights reserved.
TRADEMARKS
All trademarks, registered trademarks, brand names or product names appearing
in this document are the property of their respective owners and are used herein
for identification purposes only.
07272B DCN6552

Model T360/T360M Operation Manual Teledyne API
ii
This page intentionally left blank.
07272B DCN6552

iii
SAFETY MESSAGES
Important safety messages are provided throughout this manual for the purpose of avoiding personal
injury or instrument damage. Please read these messages carefully. Each safety message is associated
with a safety alert symbol, and are placed throughout this manual; the safety symbols are also located
inside the instrument. It is imperative that you pay close attention to these messages, the
descriptions of which are as follows:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying message for
specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or the
instrument.
Technician Symbol: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the central
safety grounding point for the instrument.
CAUTION
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other tha
That for which it was intended, unpredictable behavior could ensue with
possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es)!
For Technical Assistance regarding the use and maintenance of this instrument or any
other Teledyne API product, contact Teledyne API’s Technical Support Department:
Telephone: [phone]
Email: [email protected]
or access any of the service options on our website at http://www.teledyne-api.com/
07272B DCN6552

Model T360/T360M Operation Manual Teledyne API
iv
CONSIGNES DE SÉCURITÉ
Des consignes de sécurité importantes sont fournies tout au long du présent manuel dans le but d’éviter
des blessures corporelles ou d’endommager les instruments. Veuillez lire attentivement ces consignes.
Chaque consigne de sécurité est représentée par un pictogramme d’alerte de sécurité; ces pictogrammes
se retrouvent dans ce manuel et à l’intérieur des instruments. Les symboles correspondent aux
consignes suivantes :
AVERTISSEMENT : Risque de choc électrique
DANGER : Oxydant puissant
AVERTISSEMENT GÉNÉRAL / MISE EN GARDE : Lire la consigne
complémentaire pour des renseignements spécifiques
MISE EN GARDE : Surface chaude
Ne pas toucher : Toucher à certaines parties de l’instrument sans protection ou
sans les outils appropriés pourrait entraîner des dommages aux pièces ou à
l’instrument.
Pictogramme « technicien » : Toutes les opérations portant ce symbole doivent
être effectuées uniquement par du personnel de maintenance qualifié.
Mise à la terre : Ce symbole à l’intérieur de l’instrument détermine le point central
de la mise à la terre sécuritaire de l’instrument.
MISE EN GARDE
Cet instrument doit être utilisé aux fins décrites et de la manière décrite dans
ce manuel. Si vous utilisez cet instrument d’une autre manière que celle pour
laquelle il a été prévu, l’instrument pourrait se comporter de façon imprévisible
et entraîner des conséquences dangereuses.
NE JAMAIS utiliser un analyseur de gaz pour échantillonner des gaz
combustibles!
07272B DCN6552

v
WARRANTY
Warranty Policy (02024 F)
Teledyne Advanced Pollution Instrumentation (TAPI), a business unit of Teledyne
Instruments, Inc., provides that:
Prior to shipment, TAPI equipment is thoroughly inspected and tested. Should
equipment failure occur, TAPI assures its customers that prompt service and support
will be available.
COVERAGE
After the warranty period and throughout the equipment lifetime, TAPI stands ready
to provide on-site or in-plant service at reasonable rates similar to those of other
manufacturers in the industry. All maintenance and the first level of field
troubleshooting are to be performed by the customer.
NON-TAPI MANUFACTURED EQUIPMENT
Equipment provided but not manufactured by TAPI is warranted and will be repaired
to the extent and according to the current terms and conditions of the respective
equipment manufacturer’s warranty.
Product Return
All units or components returned to Teledyne API should be properly packed for
handling and returned freight prepaid to the nearest designated Service Center.
After the repair, the equipment will be returned, freight prepaid.
The complete Terms and Conditions of Sale can be reviewed at
http://www.teledyne-api.com/terms_and_conditions.asp
CAUTION – Avoid Warranty Invalidation
Failure to comply with proper anti-Electro-Static Discharge (ESD) handling and packing instructions
and Return Merchandise Authorization (RMA) procedures when returning parts for repair or
calibration may void your warranty. For anti-ESD handling and packing instructions please refer to
“Packing Components for Return” in the Primer on Electro-Static Discharge section of this manual,
and for RMA procedures please refer to our Website at http://www.teledyne-api.com under
Customer Support > Return Authorization.
07272B DCN6552

Model T360/T360M Operation Manual Teledyne API
vi
This page intentionally left blank.
07272B DCN6552

vii
ABOUT THIS MANUAL
This manual, PN 07272, provides operation instructions for Models T360 and T360M,
and supports operation of the Model T360U (when used in conjunction with the
T360U/GFC7000E Addendum, PN 07273). This manual is comprised of multiple
documents as listed below.
Part No. Rev Name/Description
07272 B T360 Carbon Dioxide Analyzer Operation Manual
05233 C Menu trees and software documentation (inserted as Appendix A of this manual)
06879 1/4/2011 Spare Parts List (located in Appendix B, this manual)
05235 C Repair Request Questionnaire (inserted as Appendix C of this manual)
Interconnects and Schematics included in Appendix D of this manual
0691201 B Interconnect Wire List (located in Appendix D of this manual)
06912 B Interconnect Wiring Diagram (located in Appendix D of this manual)
03297 K PCA, 03296, IR Photodetector Preamp and Sync Demodulator
03632 C PCA, 03631, 0-20mA driver
04003 N PCA, 04003, Pressure/Flow Transducer Interface
04089 A PCA, 04088, Opto Pickup Interface
04136 B PCA, 04135 Rev A, Relay
04468 B PCA, 04467, Analog Output Series Res
05803 B SCH, PCA 05802, MOTHERBOARD, GEN-5
06698 D SCH, PCA 06697, INTRFC, LCD TCH SCRN,
06882 B SCH, LVDS TRANSMITTER BOARD
06731 B SCH, AUXILLIARY-I/O BOARD
NOTE
Please read this manual in its entirety before making any attempt made to operate the instrument.
REVISION HISTORY
T360 Manual PN 07272
Date Rev DCN Change Summary
2012 Dec 13 B 6552 Administrative updates; minor technical updates
2011 Jan 12 A 5950 Initial Release
07272B DCN6552

Model T360/T360M Operation Manual Teledyne API
viii
This page intentionally left blank.
07272B DCN6552