Teltonika FM5300 User manual

FM5300 User Manual
V3.44

2
Table of contents
1.................................................................................................................................................... 6
2INTRODUCTION ..................................................................................................................... 6
2.1 ATTENTION............................................................................................................................ 6
2.2 INSTRUCTIONS OF SAFETY ......................................................................................................... 7
2.3 LEGAL NOTICE........................................................................................................................ 7
2.4 ABOUT DOCUMENT ................................................................................................................. 7
3BASIC DESCRIPTION ............................................................................................................... 8
3.1 PACKAGE CONTENTS ................................................................................................................ 8
3.2 BASIC CHARACTERISTICS ........................................................................................................... 8
3.3 MECHANICAL FEATURES ......................................................................................................... 10
3.4 TECHNICAL INFORMATION ABOUT INTERNAL BATTERY! ................................................................. 11
3.5 FM5300 HARDWARE MODIFICATION FOR EXTERNAL BACKUP BATTERY............................................ 11
3.6 ELECTRICAL CHARACTERISTICS.................................................................................................. 12
3.7 ABSOLUTE MAXIMUM RATINGS............................................................................................... 14
4CONNECTION AND PINOUT.................................................................................................. 14
4.1 SIM CARD INSERT SCHEME...................................................................................................... 14
4.2 INSTALLING FM5300 DRIVERS ................................................................................................ 16
4.3 NAVIGATE LED..................................................................................................................... 17
4.4 STATUS LED ........................................................................................................................ 17
4.5 SOCKET 210 PINOUT ........................................................................................................... 18
4.6 USB................................................................................................................................... 19
4.7 ACCESSORIES........................................................................................................................ 19
5FIRMWARE .......................................................................................................................... 24
5.1 UPDATING FIRMWARE USING USB CABLE .................................................................................. 24
6OPERATIONAL BASICS.......................................................................................................... 25
6.1 OPERATIONAL PRINCIPLES....................................................................................................... 25
6.2 OPERATIONAL MODES ........................................................................................................... 25
6.3 ACCELEROMETER .................................................................................................................. 25
6.4 VIRTUAL ODOMETER ............................................................................................................. 26
6.5 VOICE FUNCTIONALITY ........................................................................................................... 26
6.6 PROFILES............................................................................................................................. 27
6.7 FEATURES............................................................................................................................ 27
Scenarios.................................................................................................................................. 27
Trip........................................................................................................................................... 28
Geofencing............................................................................................................................... 28
iButton list ............................................................................................................................... 28
7CONFIGURATOR................................................................................................................... 28
7.1 STARTUP........................................................................................................................... 28
7.2 CONFIGURATOR STRUCTURE.................................................................................................... 29
Buttons area ............................................................................................................................ 30
Information area...................................................................................................................... 30
Profiles/global parameters selection area............................................................................... 30
7.3 PARAMETERS CONFIGURATION ................................................................................................ 31
Global parameters Settings ..................................................................................................... 31
Settings and configurable parameters menu .......................................................................... 33
7.3.1.1 System Settings .................................................................................................................. 33
7.3.1.2 GSM Settings ...................................................................................................................... 35
7.3.1.2.1 GPRS........................................................................................................................... 35
7.3.1.2.2 Data limits functionality............................................................................................. 35
7.3.1.2.3 SMS ............................................................................................................................ 35
7.3.1.2.4 Operator List .............................................................................................................. 37

3
7.3.1.3 Features ............................................................................................................................. 38
7.3.1.3.1 Mode.......................................................................................................................... 38
7.3.1.3.2 Scenarios.................................................................................................................... 40
7.3.1.3.3 Trip............................................................................................................................. 40
7.3.1.3.4 Geofencing................................................................................................................. 41
7.3.1.3.4.1 Geofencing settings ........................................................................................... 41
7.3.1.3.4.2 AutoGeofencing settings ................................................................................... 42
7.3.1.3.5 iButton List................................................................................................................. 44
7.3.1.4 I/O ...................................................................................................................................... 44
7.3.1.4.1 FM5300 available I/O list ........................................................................................... 44
7.3.1.4.2 I/O configuring ........................................................................................................... 47
7.3.1.4.3 I/O properties ............................................................................................................ 48
7.3.1.5 CAN .................................................................................................................................... 51
7.3.1.5.1 CAN interface parameters.......................................................................................... 51
7.3.1.6 Configurable parameter values and Global parameter values........................................... 53
7.3.1.6.1 Configurable parameters ........................................................................................... 53
7.3.1.6.2 Global parameters ..................................................................................................... 56
7.4 READ RECORDS*(* NEW FUNCTIONALITY AVAILABLE WITH FM5300M VERSION) ............................ 57
8PROFILE SWITCHING ............................................................................................................ 60
8.1 PROFILE SWITCHING DEPENDENCE ON GSM OPERATOR ............................................................... 60
8.2 PROFILE SWITCHING DEPENDENCE ON I/O EVENT ........................................................................ 62
Example #1 .............................................................................................................................. 63
Example #2 .............................................................................................................................. 63
9DATA ACQUISITION ............................................................................................................. 64
9.1 GPS DATA ACQUISITION ......................................................................................................... 64
Min. Period .............................................................................................................................. 65
Min. Distance........................................................................................................................... 65
Min. Angle ............................................................................................................................... 65
9.2 I/O DATA ACQUISITION .......................................................................................................... 66
Configuration........................................................................................................................... 66
Event generation ..................................................................................................................... 66
10 SLEEP/DEEP SLEEP MODES .............................................................................................. 67
SLEEP MODE ............................................................................................................................... 67
DEEP SLEEP MODE....................................................................................................................... 68
11 FEATURES AND SCENARIOS ............................................................................................. 69
11.1 ECO DRIVING/GREEN DRIVING SCENARIOS ................................................................................ 69
Mounting Requirements.......................................................................................................... 70
Configuration........................................................................................................................... 72
Data output ............................................................................................................................. 72
11.2 OVERSPEEDING SCENARIO ...................................................................................................... 73
Mounting Requirements and Working Conditions .................................................................. 73
Configuration........................................................................................................................... 73
11.3 IMMOBILIZER SCENARIO ......................................................................................................... 74
Configuration........................................................................................................................... 74
11.4 AUTHORIZED DRIVING SCENARIO ............................................................................................. 74
Configuration........................................................................................................................... 74
11.5 COM1 AND COM2 WORKING MODES .................................................................................... 74
Silent Mode.............................................................................................................................. 74
FM Log Mode........................................................................................................................... 75
LLS Mode.................................................................................................................................. 75
11.5.1.1 LLS Mode Configuration ................................................................................................... 75
11.5.1.2 LLS Polynoms Configuration............................................................................................. 75
Multipacket support ................................................................................................................ 76
LCD Mode Configuration ......................................................................................................... 76
RFID HID Mode Configuration ................................................................................................. 76

4
RFID MF7 Mode Configuration ................................................................................................ 77
Garmin Mode Configuration.................................................................................................... 77
11.5.1.3 Settings............................................................................................................................. 77
11.5.1.4 Firmware Configuration ................................................................................................... 78
COM TCP Link Mode ................................................................................................................ 78
TCP Link Mode (Binary)............................................................................................................ 79
NMEA Log Mode...................................................................................................................... 79
12 SMS COMMAND LIST ...................................................................................................... 80
12.1 GETSTATUS .......................................................................................................................... 81
12.2 GETWEEKTIME ...................................................................................................................... 81
12.3 GETOPS ............................................................................................................................... 82
12.4 READOPS # .......................................................................................................................... 82
12.5 GETNMEAINFO...................................................................................................................... 82
12.6 GETCFGTIME ........................................................................................................................ 82
12.7 GETGPS ............................................................................................................................... 83
12.8 LOADPROFILE# ..................................................................................................................... 83
12.9 CPURESET ............................................................................................................................ 83
12.10 RESETALLPROF ................................................................................................................. 83
12.11 GETVER .......................................................................................................................... 83
12.12 GETIO............................................................................................................................. 84
12.13 GETINFO ......................................................................................................................... 84
12.14 DELETERECORDS............................................................................................................... 85
12.15 READIO #........................................................................................................................ 85
12.16 SETDIGOUT #### XYZW................................................................................................. 85
12.17 GETPARAM #### ............................................................................................................. 85
12.18 SETPARAM #### #........................................................................................................... 85
12.19 FLUSH #,#,#,#,#,#,#........................................................................................................ 86
12.20 GETGNSS ........................................................................................................................ 86
12.21 SN X............................................................................................................................... 86
12.22 BANLIST.......................................................................................................................... 87
12.23 CRASHLOG ...................................................................................................................... 87
12.24 BRAMINFO ...................................................................................................................... 87
12.25 ODINFO .......................................................................................................................... 87
12.26 GETCONTSENS.................................................................................................................. 88
12.27 SAVECONTSENS ................................................................................................................ 88
13 CAN ................................................................................................................................. 88
13.1 GENERAL DESCRIPTION........................................................................................................... 89
13.2 CONFIGURATION................................................................................................................... 90
13.3 EXAMPLE............................................................................................................................. 91
13.4 AUTOCAN DESCRIPTION ........................................................................................................ 94
Configuration........................................................................................................................... 95
CAN monitoring ....................................................................................................................... 96
Offline configuration................................................................................................................ 97
AutoCAN ID list ........................................................................................................................ 97
13.5 AUTOCAN CONFIGURATION OVER SMS ................................................................................. 112
SMS command format: .......................................................................................................... 112
Parameter ID explanation: .................................................................................................... 112
AutoCAN element IDs ............................................................................................................ 112
AutoCAN element parameters............................................................................................... 113
Example of AutoCAN parameter configuration over SMS: .................................................... 114
Parameter value reading ....................................................................................................... 114
RFID .......................................................................................................................................... 114
14 GARMIN ........................................................................................................................ 115
14.1 SUPPORTED GARMIN FMI PROTOCOLS ................................................................................... 116
Standard protocols ................................................................................................................ 116

5
Enhanced protocols ............................................................................................................... 117
14.2 SUPPORTED FEATURES ON TAVL CLIENT APPLICATION ................................................................. 117
14.3 TEXT MESSAGING ................................................................................................................ 117
14.4 DESTINATION MESSAGE........................................................................................................ 118
14.5 ETA REQUEST MESSAGE ....................................................................................................... 118
14.6 CONNECTION AND PINOUT.................................................................................................... 118
15 LLS SENSOR ................................................................................................................... 119
15.1 SPECIFICATIONS .................................................................................................................. 120
15.2 HARDWARE ....................................................................................................................... 120
15.3 CONNECTING LLS TO FM5300 ............................................................................................. 120
16 GPRS COMMANDS ........................................................................................................ 128
17 DEBUG MODE................................................................................................................ 131
18 FM5300 REMOTE LOG ................................................................................................... 131
19 MOUNTING RECOMMENDATIONS ................................................................................ 135
19.1 CONNECTING WIRES............................................................................................................ 135
19.2 CONNECTING POWER SOURCE............................................................................................... 135
19.3 CONNECTING IGNITION WIRE ................................................................................................ 135
19.4 CONNECTING GROUND WIRE ................................................................................................ 136
19.5 CONNECTING ANTENNAS...................................................................................................... 136
19.6 MODULE INSTALLATION ....................................................................................................... 137
20 CHANGE LOG ................................................................................................................. 137

6
1
2INTRODUCTION
2.1 Attention
Do not disassemble the device. If the device is
damaged, the power supply cables are not isolated or
the isolation is damaged, before unplugging the power
supply, do not touch the device.
All wireless data transferring devices produce
interference that may affect other devices which are
placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in the predefined
location.
The programming must be performed using a second
class PC (with autonomic power supply).
The device is susceptible to water and humidity.
Any installation and/or handling during a lightning
storm are prohibited.
FM5300 has USB interface;
Please use cables provided with FM5300 device.
Teltonika is not responsible for any harm caused by
using wrong cables for PC <-> FM5300 connection.
This sign on the packaging means that the electric and
electronic equipment to be utilized must be stored
separately.

7
2.2 Instructions of safety
This chapter contains information on how to operate FM5300 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device!
To avoid mechanical damage, it is advised to transport the FM5300 device in an impact-
proof package. Before usage, the device should be placed so that its LED indicators are visible,
which show the status of operation the device is in.
When connecting the connection (2x10) cables to the vehicle, the appropriate jumpers of
the power supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the 2x10 connection must be
disconnected.
The device is designed to be mounted in a zone of limited access, which is inaccessible for
the operator. All related devices must meet the requirements of standard EN 60950-1.
The device FM5300 is not designed as a navigational device for boats.
2.3 Legal Notice
Copyright  2 Teltonika. All rights reserved. Reproduction, transfer, distribution or
storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.
Garmin and the Garmin logo are registered trademarks, all rights reserved.
Other products and company names mentioned here may be trademarks or trade names
of their respective owners.
2.4 About document
This document contains information about the architecture, possibilities, mechanical
characteristics, and configuration of the FM5300 device.
Acronyms and terms used in document:
PC Personal Computer
GPRS General Packet Radio Service
GPS Global Positioning System
GSM Global System for Mobile Communications
SMS Short Message Service
AC/DC Alternating Current/Direct Current
I/O Input/Output.
Record AVL data stored in FM5300 memory. AVL data contains GPS and I/O information
AVL packet - Data packet that is being sent to server during data transmission. AVL packet
contains from 1 to 50 records.
Geofence a virtual geographic area of interest that can be defined by a radius or polygon
for t            
generates an event when crossing a defined area.

8
3BASIC DESCRIPTION
FM5300 is a terminal with GPS and GSM connectivity, which is able to determine the
 and transfer them via the GSM network. This device is perfectly suitable for
applications, which need location acquirement of remote objects. It is important to mention that
FM5300 has additional inputs and outputs, which let you control and monitor other devices on
remote objects. FM5300 also has a USB port for device status log output and entering
configurations.
3.1 Package contents
1
Usually the FM5300 device sample is supplied to the customer in a cardboard box
containing all the equipment that is necessary for operation. The package contains:
FM5300 device
Input and output power supply cable with 2x10 connection pins
4 screws for assembling device
GPS/GLONASS antenna
GSM antenna
USB cable
Port 1/2 cable
Port 3 cable
Card with link to drivers and configurator
3.2 Basic characteristics
GSM/GPRS features:
Teltonika TM11Q quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
GPRS class 10;
SMS (text, data).
GPS features:
Fastrax IT600 32 channel GPS/GLONASS receiver;
Protocol NMEA-0183: GGA, GGL, GSA, GSV, RMC, VTG;
Up to -160 dBm sensitivity.
GLONASS features:
NV08C-CSM 32 tracking channels;
Protocol NMEA-0183: GGA, GGL, GSA, GSV, RMC, VTG;
GPS/GALILEO/SBAS: L1 1575.42 MHz;
GLONASS: L1 1597.5-1609.5 MHz;
Up to -160 dBm sensitivity.
1
Package content depends on Order Code, and can be customized by customer needs.

9
GNSS GGG303 Module features:
Navigation Systems; GPS/GLONASS/GALILEO/QZSS;
Protocol NMEA-0183: GGA, GGL, GSA, GSV, RMC, VTG;
Up to -162 dBm sensitivity.
Hardware features:
-M3 processor;
16 MB internal Flash memory;
Built-in accelerometer.
Internal backup battery included
Interface features:

USB port;
4 digital inputs;
4 analog inputs;
4 open collector digital outputs;
;
;
LEDs indicating device status;
2xRS232 ports;
Audio interface;
CAN messages 2.0 A, B Active support. Speed up to 1 Mbit/s.
Optional features (enable with FM5300M):
The memory can save 47,615 records;
Roaming enabling/disabling;
Offline working mode;
Records importing using USB;
Remote logs reading via SMS/GPRS
Overvoltage protection (new devices with order code FM5300 Vxxxxx):
Description
Voltage
Duration
Normal operation
10-30V
Unlimited
Protection turns on, device turns off.
34V
Unlimited
Maximum voltage
<70V
Unlimited
Maximum voltage impulse
90V
5 mili seconds

10
3.3 Mechanical features
Table 1 FM5300 physical interfaces and operation environment
Part name
Physical specification
Operation environment
Navigation LED
LED
Operation temperature:
-
Storage temperature:
- 
 95 %
(non condensating)
Modem LED
LED
GNSS
Antenna connector SMA
female outer shell, female inner pin
GSM
Antenna connector SMA
male outer shell, male inner pin
Socket 2x10
Tyco Micro MATE-N-
or similar
USB
Mini USB socket
Port1
RS232 port channel 1 (RJ45 socket)
Port2
RS232 port channel 1 (RJ45 socket)
Audio port
RJ9
Figure 1 FM5300 view & dimensions in mm (tolerance ±2mm)

11
3.4 Technical Information about internal battery!
Ni-MH Rechargeable battery, 8.4V, 550 mA.
FM5300 operating time with internal backup battery depends on temperature, data
sending frequency (SMS and GPRS), and accumulator age, number of charge/discharge cycles.
For example:
In sleep mode a new FM5300 device, operating time approximately 15 hours
In deep sleep mode 137 hours
Operating time for a new FM5300 device, working in normal mode (records are
being acquired every 10 sec. and sent in packets of 4 records every 60 sec.), is
approximately 2 h 30 min.
3.5 FM5300 hardware modification for external backup battery.
Special version of FM5300 allows to connect additional external backup battery. Such
FM5300 modification should be purchased by special order. Contact sales manager for details.
Operating from backup accumulator:
Uext > Ubat -> Uext.
Ubat > Uext -> Ubat
FM5300 should be connected only with 8 V Sealed lead rechargeable batteries
(accumulators). Teltonika is not responsible for any harm caused by using wrong accumulator
type.
Connect any capacity 8 
Time of charging the accumulator increases while using the accumulator with higher capacity.
Operation (discharge) temperature -40  C (check with accumulator datasheet)
Operation (charge) temperature -20  C (check with accumulator datasheet).
Operating time depends on temperature, data sending frequency (SMS and GPRS), and
accumulator age, number of charge/discharge cycles.

12
3.6 Electrical characteristics
Table 2 Electrical characteristics
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
SUPPLY VOLTAGE
Supply Voltage (Recommended Operating Conditions)
11.8
-
30
V
Supply Voltage
(for internal rechargeable battery charging proper
functioning)
11.8
-
30
V
POWER SUPPLY CURRENT (HARDWARE VERSION WITH INTERNAL BATTERY)
Deep Sleep, average, Icc.ds
-
1.5
4
mA
Sleep, average, Icc.ds, Vcc=12V
-
35
-
mA
Sleep, average, Icc.ds, Vcc=24V
-
20
-
mA
Ucc=12.6V, all modules fully working, internal battery is
charging, Icc1
-
-
315
mA
Ucc=12.6V, all modules fully working, internal battery is
charged, Icc2
-
-
245
mA
Ucc=25.2V, all modules fully working, internal battery is
charging, Icc3
-
-
158
mA
Ucc=25.2V, all modules fully working, internal battery is
charged, Icc4
-
-
123
mA
SUPPLY CURRENT (HARDWARE VERSION WITH EXTERNAL BATTERY)
Deep Sleep, average, Icc.ds
-
1.5
4
mA
Ucc=12.6V, all modules fully working, external battery is
charging, Icc5
-
-
566
mA
Ucc=12.6V, all modules fully working, external battery is
charged, Icc6
-
-
245
mA
Ucc=25.2V, all modules fully working, external battery is
charging, Icc7
-
-
283
mA
Ucc=25.2V, all modules fully working, external battery is
charged, Icc8
-
-
123
mA
DIGITAL OUTPUT (OPEN DRAIN GRADE)
Drain current (Digital Output OFF)
-
-
120
uA
Drain current (Digital Output ON, Recommended
Operating Conditions)
-
-
300
mA
Static Drain-Source resistance (Digital Output ON)
-
-
300
mOhm
DIGITAL INPUTS

13
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Input resistance (DIN1, DIN2, DIN3)
15
-
-
kOhm
Input Voltage (Recommended Operating Conditions)
0
-
Supply
voltage
V
Input Voltage threshold (DIN1)
-
7,5
-
V
Input Voltage threshold (DIN2, DIN3, DIN4)
-
2,5
-
V
ANALOG INPUTS
Input Voltage (Recommended Operating Conditions),
Range1
0
-
10
V
Input resistance, Range1
-
120
-
kOhm
Input Voltage (Recommended Operating Conditions)
Range2
0
-
30
V
Input resistance, Range2
-
147
-
kOhm
OUTPUT SUPPLY VOLTAGE 1-WIRE2
Supply Voltage
3,3
-
3,9
V
Output inner resistance
-
7
-
Ohm
Output current (Uout > 3.0V)
-
30
-
mA
Short circuit current (Uout = 0)
-
130
-
mA
CAN INTERFACE
Internal terminal resistors CAN bus
-
No
-
Ohm
Differential input resistance
19
30
52
kOhm
Recessive output voltage
2
2.5
3
V
Differential receiver threshold Voltage
0.5
0.7
0.9
V
Common mode input voltage
-30
-
30
V
When connecting a COM port to an active external device keep in mind that
the first power supply must be connected to FM5300, and then the external
device should be powered. Connecting external devices when FM5300 is
powered off is not recommended.
2
-1-wire Supply voltage PIN is dedicated for 1-wire devices ONLY, do not use it for any other purpose.

14
3.7 Absolute Maximum Ratings
Table 3 Absolute maximum ratings
VALUE
CHARACTERISTIC DESCRIPTION
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-32
32
V
Digital output clamp threshold voltage (Absolute
Maximum Ratings), (Idrain = 2mA)
36
V
Digital Input Voltage (Absolute Maximum Ratings)
-32
32
V
Analog Input Voltage (Absolute Maximum Ratings)
-32
32
V
Voltage on Supply Voltage 1-Wire (Absolute
Maximum Ratings)
0
10
V
Voltage on Data Input/Output 1-Wire (Absolute
Maximum Ratings)
0
10
V
Voltage on CANH, CANL (Absolute Maximum
Ratings)
-58
58
V
4CONNECTION AND PINOUT
4.1 SIM card insert scheme

Gently open FM5300 case using screwdrivers

15

Take off FM5300 case and insert SIM card
as shown

Assemble device as shown and put screws
into the holes



16
Screw all 4 screws
Device is ready
4.2 Installing FM5300 drivers
Software requirements
-bit and 64-bit: Windows XP with SP3 or later, Windows Vista,
Windows 7.
http://www.microsoft.com or
http://avl1.teltonika.lt/downloads/tavl/Framework/dotnetfx35setupSP1.zip).
Drivers
Please download Virtual COM Port drivers from Teltonika website:
http://avl1.teltonika.lt/downloads/FM11/vcpdriver_v1.3.1_setup.zip
Installing drivers
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM5300 device
connected to the computer. Click Nextin driver installation window (figures below):
Figure 2 Driver installation window
This will launch the   
button again:
Figure 3 Driver installation window

17
Setup will continue installing drivers and will display a window about successful process in
the end. Click Finishto complete setup:
Figure 4 Driver installation window
You have now installed drivers for FM5300 device successfully.
4.3 Navigate LED
Table 4 Navigate LED operation
Behaviour
Meaning
Permanently switched on
GPS signal is not received
Blinking every second
Normal mode, GPS is working
Off
GPS is turned off because:
Deep sleep mode
Or GPS antenna short circuited
4.4 Status LED
Table 5 Status LED Operation
Behaviour
Meaning
Blinking every second
Normal mode
Blinking every 2 seconds
Deep sleep mode
Blinking fast for a short time
Modem activity
Blinking fast constantly
Boot mode
Off
Device is not working
Or Device firmware being flashed

18
4.5 Socket 2 10 pinout
(-)EXT. BAT
10
20
(+) EXT. BAT
OUT 2
9
19
OUT 1
OUT 3
8
18
OUT 4
AIN 2
7
17
AIN 1
AIN 4
6
16
AIN 3
DIN 2
5
15
DIN 1
DIN 4
4
14
DIN 3
1W. PWR
3
13
1W. data
CAN L
2
12
CAN H
(-)GND
1
11
(+)VCC (10 30)V DC
Figure 5 2x10 socket pinout
Table 6 2x10 SOCKET PINOUT DESCRIPTION
Pin
Nr.
Pin Name
Description
1
(-)GND
( -  V DC*
2
CAN L
SAE J1939 CAN interface Low channel
3
1W. PWR
Power supply pin for Dallas 1-
4
DIN 4
Digital input. Channel 4
5
DIN 2
Digital input. Channel 2
6
AIN 4
Analog input, channel 4. Input range: 0 30V/ 0 10V DC
7
AIN 2
Analog input, channel 2. Input range: 0 30V/ 0 10V DC
8
OUT 3
Digital output. Channel 3. Open collector output
9
OUT 2
Digital output. Channel 2. Open collector output
10
Ext. Battery 
This pin is used connected with pin 20 (Ext. Battery (+)). The function of
these pins is to disconnect the internal accumulator during shipment or
storage. When pin 10 and pin 20 are connected, the internal
accumulator is on, while disconnected the internal accumulator is off.
11
(+)VCC (10...30) V DC
Power supply pin
12
CAN H
SAE J1939 CAN interface High channel
13
1W. data
Data channel for Dallas 1-
14
DIN 3
Digital input, channel 3
15
DIN 1
Digital input, channel 1 (RESERVED FOR IGNITION LINE)
16
AIN 3
Analog input, channel 3. Input range: 0 30V/ 0 10V DC

19
Pin
Nr.
Pin Name
Description
17
AIN 1
Analog input, channel 1. Input range: 0 30V/ 0 10V DC
18
OUT 4
Digital output. Channel 4. Open collector output
19
OUT 1
Digital output. Channel 1. Open collector output
20
Ext. Battery (+)
This pin is used connected with pin 10 (Ext. Battery (). The
function of these pins is to disconnect the internal accumulator during
shipment or storage. When pin 10 and pin 20 are connected, the
internal accumulator is on, while disconnected the internal
accumulator is off.
4.6 USB
When FM5300 is connected to a PC it creates a STM Virtual COM Port, which can be used
as a system port (to flash firmware and configure the device).
Figure 6 COM-Ports
4.7 Accessories
Note: Teltonika does not provide any additional equipment like panic
buttons, door sensors or other, except of 1 wire devices: TTJ-101 thermo
sensor and I-Button. These devices are not included in FM5300 package and can
be offered by special order only.

20
1 –Wire devices
One of the FM5300 features is realized 1-Wire data protocol, which enables connection of
up to three thermometers (DS1820, DS18S20 and DS18B20) and I-Button DS1990A see Figure 7
Digital thermometer DS1820 and TTJ 100 connection scheme. Figure 8 show FM5300 and 1-wire
devices connection schemes.
Left row of pins
1
3
4
1
2
2
J1
J2
J3
U1
Right row of pins
1W. PWR
(FM5300 pin3)
1
1W. Data
(FM5300 
pin13)
2
1
Vpp (+5 Volts
DC) power
source for external
digital sensor
GND
(FM5300 pin1)
3
2
Output from
external digital
sensor
Digital Input
4
Figure 7 Digital thermometer DS1820 and TTJ 100 connection scheme