TELUS ADC-SG130Z User manual

Automation Hub
Installation
Guide
ADC-SG130Z
Before You Start
What’s in the box?
Automation Hub Ethernet Cable Power Supply
You’ll need:
Ethernet Cable
Smartphone or
Tablet
Existing Internet
Modem
Optional
Network Switch Network Switch
Power Supply
For additional instructions and tips,
visit telus.com/AutomationHub or
scan the QR code:
Locate Your Modem
1
Overview
Power
Z-Wave
Wi-Fi
Communication
Data
Reset
Z-Wave
WPS
LEDs
Buttons
Ethernet
Power
Ports
Inside
communications
closet
Near TV or
digital box Near electrical
panel in basement
or garage
Possible Locations
Unable to nd your modem?
Modems come in different shapes and sizes. If you need help locating
your modem, support agents are available 24/7 at 1-855-255-8828.

Connect to Modem
2Connect Power 3
You’ll need:
Automation Hub Power Supply
You’ll need:
Ethernet CableAutomation Hub
Booting Up
4
5minutes
Flashing
Flashing
(slow)
Solid
Flashing
Solid
Off
Off
Off
Alternative: Connect with Network Switch
You’ll need:
Ethernet Cable (x2)Network Switch
Automation Hub Power Supply (x2)
NOTE
The Network Switch is only required if there are no available LAN ports
on your existing modem. If you unplug a device to free up a port on
your modem, make sure you plug that device into the Network Switch.

Get the TELUS SmartHome App
5
Forgot your SmartHome Security log in?
Learn how you can recover it.
Password
Email/Username
Log in
SmartHome Security
Download the TELUS SmartHome app,
then log in with your My TELUS credentials.
Add Automation and Video Devices
6
telus.com/securitysetup
telus.com/SmartHomeGuides
telus.com/SmartHomeGuides
Visit telus.com/SmartHomeGuides for
instructions on installing your devices.
TELUS SmartHome
Add Device to Your Account
7Return to Home Screen 8
TIP
If you have smart light
bulbs or smart plugs, make
sure to install these rst.
TELUS SmartHome

Nice Work, You’re All Done!
Our customer support agents are available 24/7 at
1-855-255-8828.
For additional installation instructions, videos and trouble-
shooting, please visit telus.com/SmartHomeGuides or
scan the QR code below.
Additional Support
LED Reference Guide
Power LED
Flashing
Solid
Off
Device powered on
Device powered off
Device booting
Data LED
Flashing
Solid
Off
Device transferring or receiving data over
Ethernet
No data is being transferred over Ethernet
Device transferring or receiving data over
Ethernet
Communication LED
Flashing
(slow)
Flashing
(5 quick blinks)
Solid
Off
Connected to TELUS SmartHome
No local or Internet connection
Local connection, no Internet
Communication test initiated
LED Reference Guide Troubleshooting (Factory Reset)
Wi-Fi LED
Flashing
Solid
Off
Active
Inactive
WPS mode
Z-Wave LED
Flashing
(quickly)
Solid
(15 seconds)
Flashing
(slowly)
Off
In Add mode
Normal operation
Adding new device
Device added
Device removed
In Remove mode
(Add process) (Remove process)
Additional states (All LEDs)
Flashing
(simultaneously)
Flashing
(escalating)
Reset in progress
Firmware upgrade in progress
NOTE
If you have issues connecting the device to a TELUS account,
power cycle the Automation Hub (unplug the power cable from the
Automation Hub and plug it back in to restore power). If issues
persist, reset the device to factory defaults.
Flashing
Solid
30 seconds