Tenda W330R User manual

Wireless-N Broadband Router
1

Wireless-N Broadband Router
Copyright Statement
is the registered trademark of
Shenzhen Tenda Technology Co., Ltd. All the
products and product names mentioned herein are
the trademarks or registered trademarks of their
respective holders. Copyright of the whole product
as integration, including its accessories and software,
belongs to Shenzhen Tenda Technology Co., Ltd.
Without the permission of Shenzhen Tenda
Technology Co., Ltd, any individual or party is not
allowed to copy, plagiarize, imitate or translate it into
other languages.
All the photos and product specifications mentioned
in this manual are for references only. As the
upgrade of software and hardware, there will be
changes. And if there are changes, Tenda is not
responsible for informing in advance. If you want to
know more about our product information, please
visit our website at www.tenda.cn.
1

Wireless-N Broadband Router
Contents
Chapter 1: Introduction.......................................................1
Package Contents...........................................................2
Chapter 2: Getting to Know the Wireless-N Broadband
Router...................................................................................3
The Rear Panel................................................................3
The Front Panel...............................................................4
Hardware Installation......................................................6
Chapter 3: Getting to Connect the Wireless-N Broadband
Router...................................................................................7
How to Set the Network Configurations for My
Computer.........................................................................7
How to Check the Network Connection........................9
Chapter 4 Basic Configurations.......................................10
How to Access the Web-based Configuration Utility.10
Setup Wizard .................................................................11
Chapter 5: Advanced Settings .........................................16
LAN Settings .................................................................16
WAN Settings—PPPoE.................................................17
WAN Settings—Static IP...............................................19
WAN Settings—L2TP....................................................20
2

Wireless-N Broadband Router
WAN Settings—PPTP....................................................21
MAC Address Clone......................................................22
DNS Settings.................................................................23
Chapter 6: Wireless Settings............................................25
Wireless Mode...............................................................25
Basic Settings ...............................................................30
Wireless Security Settings...........................................31
WPS Settings.................................................................40
WDS Settings ................................................................42
Advanced Wireless Settings........................................45
Wireless Access Control..............................................47
Wireless Connection Status.........................................48
Chapter 7: DHCP Server...................................................49
DHCP Server List ..........................................................50
Chapter 8: Virtual Server..................................................51
Single Port Forwarding.................................................51
Port Range Forwarding ................................................53
Port Trigger Settings.....................................................55
ALG Service Settings....................................................58
DMZ Settings.................................................................61
UPnP Settings ...............................................................62
Chapter 9: Traffic Control.................................................63
Traffic Control ...............................................................63
3

Wireless-N Broadband Router
Chapter 10: Security Settings..........................................66
Client Filter Settings.....................................................66
URL Filter Settings........................................................68
MAC Address Settings .................................................70
Prevent Network Attack................................................71
Remote Web Management ...........................................72
Local Web Management ...............................................73
WAN Ping.......................................................................74
Chapter 11: Routing Settings...........................................75
Routing Table ................................................................75
Static Route...................................................................76
Chapter 12: System Tools ................................................77
Time................................................................................77
DDNS..............................................................................77
Backup/Restore.............................................................79
Firmware Upgrade ........................................................80
Restore to Factory Default Settings............................81
Reboot............................................................................82
Change Password.........................................................82
System Log....................................................................84
Appendix A: Product Features.........................................85
4

Wireless-N Broadband Router
Chapter 1: Introduction
Thank you for choosing the W330R Wireless-N Broadband
Router. W330R utilizes advanced MIMO technology and
increases over 8 times transmission range of ordinary
802.11g products. Compatible with IEEE802.11n (Draft 2.0)
and IEEE802.11g/b standards, it can provide up to 300Mbps
stable transmission rate. Additionally, it integrates router,
wireless access point, four-port Gigabit switch and firewall in
one. In addition, its extraordinary intelligent software, Setup
Wizard,makesthedevice’sinstallationmoreconvenient.
It supports WDS (Wireless Distribution System) function for
repeating and amplifying the signals to extend the wireless
network coverage. Besides, it can disable SSID broadcast
manually. WPS (PBC and PIN) encryption method, port filter
and MAC address filter can protect your network from
malicious attack. W330R can be managed through
local/remote Web management interface anywhere.
Moreover, the WMM function can make your voice and video
more smooth. Powerful and exquisite, it is the best choice for
SOHOs and small-sized enterprises to share the wireless
network.
1

Wireless-N Broadband Router
Package Contents
¾One W330R Wireless-N Broadband Router
¾One Ethernet Network Cable
¾One Quick Installation Guide
¾One Power Adapter
¾One CD-ROM
If any of listed items are missing or damaged, please contact
the Tenda reseller from whom you purchased for replacement
immediately.
2

Wireless-N Broadband Router
Chapter 2: Getting to Know the
Wireless-N Broadband Router
The Rear Panel
Here is the description of the back panel. The RJ-45 ports for
cable connection and Reset button are located on the back
panel as shown below.
3

Wireless-N Broadband Router
Connections:
Rear Panel
Interface Description
LAN Ports(1-4) Connect to Ethernet devices (such as
computers, switches, hubs).
RESET
Note: After pressing the RESET button for
7 seconds, the configurations you have set
will be deleted and the device will restore
to the factory default settings.
WAN Connect to DSL Modem, Cable Modem or
community broadband
DC IN Receptor for the supplied power adapter.
The Front Panel
There are the Router’s LED indicators on the front panel as
shown below.
4

Wireless-N Broadband Router
LEDS:
Note: The device's ports are 10/100/1000Mbps. When the
speed is at 1000Mbps, the LED indicators will be green; when
at 10/100Mbps, the LED indicators will be red.
LED
Indicator Status Description
POWER Always
ON
The POWER indicator is Always ON
when it is powered on and works
properly.
SYS Blinking The SYS is blinking regularly when
the system works normally.
Always
ON Indicates the correct connection of
the WAN ports.
WAN Blinking Indicates the Router is
transmitting/receiving data packets.
WLAN Blinking Indicates the wireless signal is OK.
Always
ON Indicates the correct connection of
the LAN ports.
LAN(1/2/
3/4) Blinking Indicates the Router is
transmitting/receiving data packets.
WPS Blinking Indicates the Router is negotiating
with WPS clients in WPS Mode
(PBC).
5

Wireless-N Broadband Router
Hardware Installation
1. Please connect the LAN
port of the router to the
network adapter of your
computer with one cable.
2.Please use the delivery-
attached power adapter to
power the router.
3.Please connect your
broadband line provided
by your ISP to the WAN
port of your router.
IMPORTANT:
Please use the included power adapter. Use of a
different power adapter could cause damage and
void the warranty for this product.
6

Wireless-N Broadband Router
Chapter 3: Getting to Connect the
Wireless-N Broadband Router
For easy and fast configuration, the following steps for
network configuration are required.
How to Set the Network Configurations for My
Computer
Right click “My Network
Places” and select
“Properties”.
Right click “Local Area
Network Connection”
and select “Properties”.
Select “Internet Protocol
(TCP/IP)”and click
“Properties ”.
7

Wireless-N Broadband Router
Select “Obtain an IP
address automatically”
and “Obtain DNS server
address automatically”.
Click “OK” to save the
configurations.
Or select “Use the
following IP address”
and enter the IP address,
Subnet mask, Default
gateway as shown right.
Of course, you need to
input the DNS server
address provided by your
ISP. Otherwise, you can
use the Router’s default
gateway as the DNS proxy
server. Click “OK” to save
the configurations.
8

Wireless-N Broadband Router
How to Check the Network Connection
Select“Start”— ”Program
s”—“Accessories”
—“Command Prompt”.
Input the “ping
192.168.0.1” and press
“Enter”. If the screen
displays as the right figure,
it means your PC is
connected to your router
successfully.
If not, please make sure
the hardware installation
and network adapter are
OK. After all preparations
are made, please proceed
to Chapter 4 for more and
advanced configuration.
9

Wireless-N Broadband Router
Chapter 4 Basic Configurations
This section is to show you how to configure your new
Wireless-N Broadband Router through the Web-based
Configuration Utility.
How to Access the Web-based Configuration
Utility
To access the Router’s
Web-based Utility, launch a
web browser such as
Internet Explorer or Firefox
and enter the Router’s
default IP address,
http://192.168.0.1. Press
“Enter”.
Please input the “admin” in
both User Name and
Password. Click “OK”.
10

Wireless-N Broadband Router
Setup Wizard
Here is the “Welcome to
Setup Wizard” for
configuring your Router
quickly. Click “Next”.
In this screen, select one
mode of your Internet
connection you use. If you
are not clear, press the
“Detect” button or contact
your Internet Service
Provider, and click “Next”.
ÎConnection Mode 1:
ADSL Virtual Dial-up (Via
PPPoE)
Enter the Account and
Password provided by
your ISP, and click
“Next”.
ÎConnection Mode 2:
Dynamic IP (Via DHCP)
If your connection mode
11

Wireless-N Broadband Router
is Dynamic IP, it means
your IP address keeps
changing every time you
connect. You do not need
to enter the information
like Mode 2 or Mode 3.
ÎConnection Mode 3:
Static IP
In this screen, fill the
network address
information from your ISP
in the IP Address, Subnet
Mask, Gateway and
Primary DNS server
fields and click “Next”.
ÎConnection Mode 4:
L2TP
Select L2TP(Layer 2
Tunneling Protocol) if
your ISP use a L2TP
connection, your ISP will
provide you with a
username and password
please fill in the
12

Wireless-N Broadband Router
parameters.
L2TP provides two
access modes.
If the L2TP offered by
your ISP is Dynamic IP:
Please select Dynamic
IP .
If the L2TP offered by
your ISP is Static IP:
Please fill in the
parameters provided by
your ISP.
After configuration, please
click “Next”.
ÎConnection Mode 5:
PPTP
If the connection is “PPP
Tunneling Protocol”,
please input the following
parameters provided by
your ISP: Server IP
Address, User Name,
and Password.
13

Wireless-N Broadband Router
PPTP provides two
access modes.
If the PPTP offered by
your ISP is Dynamic IP:
Please select Dynamic
IP.
If the PPTP offered by
your ISP is Static IP:
Please fill in the
parameters provided by
your ISP.
After configuration, please
click “Next”.
Click “Apply”, select
“Reboot” in System Tools
of the left menu and press
the “Reboot the router”
button.
It is rebooting now, please
wait for a few
minutes and DO NOT
power off it.
14

Wireless-N Broadband Router
Click the “System Status”
in the left menu of the
Web-based Utility to find
out the current network
and system information. If
the “Connection Status” is
“Connected”,
Congratulations you on
completing the Router’s
basic settings. You are on
the Internet now. If you
want to configure more,
please proceed to the
following explanations for
Advanced Settings.
15
Table of contents
Other Tenda Wireless Router manuals