Tendercare Snugseat Snappi User manual

Snugseat Snappi Playtray Instructions
Document No: 053-29 v1 Page 1 of 4 July 2011
Snappi Playtray Instructions.doc
6.6: Playtray – not suitable for rearward facing Snugseat Snappi
The Snugseat Snappi playtray offers height,
depth and angle adjustment, so that it can be
adapted to suit your needs. It is available in
clear or black. (clear playtray shown for
illustrative purposes Fig 6.6.1).
The playtray comes supplied with the
following:
•2 angle adjustable vertical stems
(marked A and B)
•2 depth adjustment brackets and
thumbscrews (fitted to the tray, also
marked A and B)
Fig 6.6.1
Fig 6.6.2
The playtray is supplied with the
depth adjustment brackets fitted to
the tray (as illustrated in Fig 6.6.2)
These are marked with the letters A
and B as shown.
When attaching the angle adjustable vertical
stems to the depth adjustment brackets,
please ensure that you attach stem A to
bracket A and stem B to bracket B (as
illustrated in Fig 6.6.3).
Fig 6.6.3

Snugseat Snappi Playtray Instructions
Document No: 053-29 v1 Page 2 of 4 July 2011
Snappi Playtray Instructions.doc
Fig 6.6.4
If you purchase the playtray after you have
received the pushchair you will also
receive 2 of each of the following 4 pieces
which are needed in order to mount the
playtray:
•Thumb Screw (A)
•Socket Button (B)
•Mounting Bracket (C)
•Playtray Receiver Bracket (D)
Put the Mounting Bracket (C) onto the
Interface tube underneath the seat shell so
that the tube with the welded nut is facing the
outside. (See Fig 6.6.5)
Fig 6.6.5
Fig 6.6.6
Put the Thumb Screw (A) into the hole on
the short vertical tube of the Playtray
Receiver Bracket (D). Then put the long
horizontal tube into the outer tube of the
Mounting Bracket (C) (See Fig 6.6.6)
D
B
C
A

Snugseat Snappi Playtray Instructions
Document No: 053-29 v1 Page 3 of 4 July 2011
Snappi Playtray Instructions.doc
Align the hole in the long horizontal tube of
the Playtray Receiver Bracket (D) with the
hole in the welded nut on the Mounting
Bracket (C). Using a 4mm Allen Key, screw
the Socket Button (B) through both holes until
tight (See Fig 6.6.7). Repeat these steps on
the other side of the seat. You are now ready
to mount the playtray to the seat. Locate the
2 vertical stems on the bottom of the tray into
the 2 receivers on the seat unit. Position the
tray to the required height, and then secure it
in place by tightening the thumbscrews.
Fig 6.6.7
To adjust the angle of the playtray, loosen the 2
angle adjustors (see Fig 6.6.8).
Once loose, adjust the angle as required and
retighten.
N.B. the angle adjustors are toothed, and may
require some force to move. The angle adjustors
move in 5-degree increments.
Fig 6.6.8
Fig 6.6.9
To adjust the depth of the playtray,
loosen the 2 thumbscrews under
the base of the tray (See Fig 6.6.9).
Slide the tray in or out to the
required depth, and then retighten
the screws.

Snugseat Snappi Playtray Instructions
Document No: 053-29 v1 Page 4 of 4 July 2011
Snappi Playtray Instructions.doc
Notes:
•We recommend that the playtray is removed before making any adjustments to the seat or
seat tilt, and is then refitted and adjusted accordingly once the seat is in the desired
position. When adjusting the Tilt in Space facility, the angle of the playtray must be adjusted
to the new horizontal position (see above instructions for how to adjust the angle of the
tray).
•All items must be removed from the playtray before making any adjustment to the tray or
seat to avoid the risk of causing accidental harm to the occupant.
•The playtray must be removed before folding the pushchair.
•The playtray must be removed when transporting the chair in specially adapted vehicles.
•The playtray cannot be used at the same time as the rain cover.
•Never leave you child unattended with the play tray fitted, especially when items are
positioned on the tray.
•Extra care must be taken when placing food or drink on the tray.
•Maximum carrying capacity of the play tray is 5kg.