Tenmars TM-4001 User manual

Hot-Wire
Air Velocity Meter
User’s
Manual
TM-4001 / TM-4002
/ TM-4003
TENMARS ELECTRONICS CO., LTD
HB2TM4001002

CONTENTS
1. PREFACE............................................................. 2
2. GENERAL DESCRIPTION .................................. 2
3. SPECIFICATIONS (23 ℃ ±5 ℃ )............................. 3
4. INSTRUMENT DESCRIPTION............................ 6
5. LCD DESCRIPTION ............................................ 7
6. POWER ON/OFF ............................................... 10
7. Auto power off .................................................... 10
8. BACKLIGHT ....................................................... 10
9. CHANGE AIR VELOCITY UNIT......................... 10
10. CHANGE UNIT....................................................11
11. CHANGE FUNCTION .........................................11
12. TIME CONSTANT SETTING MODE ..................11
13. AIR FLOW SETTING MODE ............................. 12
14. DATA HOLD........................................................ 12
15. SINGLE DATA RECORD ................................... 12
16. VIEWING OR CLEARING DATA RECORDS .... 13
17. MAX/MIN/AVG.................................................... 13
18. PRECAUTIONS ................................................. 14
19. SOFTWARE INSTALLATION(TM-4003)............ 15
20. COMPUTER GRADE......................................... 15
21. EXTERNAL DC POWER ................................... 16
22. SAFETY AND MAINTENANCE STANDARDS .. 16
23. BATTERY REPLACEMENT............................... 17
24. END OF LIFE ..................................................... 17

TM-4001/4002/4003
2
1. PREFACE
Thank you for purchasing out product.
Please, read the operating instructions in details
before you use this Hot-Wire Velocity meter, so
you will operate the meter correctly. This meter
can be operated in industry and home.
WARNING
Non-compliance warning and/or operating
instructions may damage the instrument or
its parts or injuring the operator.
2. GENERAL DESCRIPTION
Fast response probe.
Air flow volume.(Use platinum-resistors sensor)
Telescoping probe.
Instant/ AVG/ 2/3V MAX flow measurement.
Max/AVG/Min & data hold function.
Low batter indication “ ”.
LCD triple display with LED backlight.
Manual data memory and read function
(99 records). (TM-4001/TM-4002)
Humidity measurement. (TM-4002/TM-4003)
Calculate dew point temperature, wet bulb
temperature. (TM-4002/TM-4003)
Absolute pressure measurement. (TM-4003)
Auto power off with disable function.
USB PC serial interface. (TM-4003)
Data logging capacity(8000 records).(TM-4003)
Sampling interval : Max 24 hours; Min 1S.
(TM-4003)

TM-4001/4002/4003
3
3. SPECIFICATIONS (23℃±5℃)
Air velocity measurement:
Unit Range Resolution Accuracy
m/s 0.01~25.00 0.01
±(3%of
reading
+1.6%FS)
Km/hr(kph) 0.02~90.00 0.1
mph 0.12~55.9 0.1
Knots(kts) 0.11~48.6 0.01
Ft/min(fpm) 0~4921.0 0.1
Beaufort 1~10 1 -
Air flow(volume) calculate:
Unit Range Resolution Accuracy
CMM 0~9999 0.1 -
CFM 0~9999 0.1 -
Temperature Measurement:
Unit Range Resolution Accuracy
℃-20~50 0.1 ±1℃
℉-4~122 0.1 ±1.8℉
Humidity(TM-4002、TM-4003):
Unit Range Resolution Accuracy
%RH 20~80 0.1 ±3.5%RH
%RH <20,>80 0.1 ±5.0%RH

TM-4001/4002/4003
4
Absolute pressure(TM-4003):
Unit Range Resolution Accuracy
hPa 350~1100 0.1 ±2hPa
mmHg 263~825 0.1 ±1.5mmHg
inHg 10.3~32 0.1 ±0.1
Meter Dimension: 156x73x35mm(Lx W x H).
Probe Dimension:
Wire length: 160cm
Probe length: 128cm
Probe diameter of tip: 1.6cm
Probe diameter of base: 3.2cm
Meter weight: 250g.(without batteries)
Probe weight: 240g.
Power supply: UM-4(AAA)1.5V*6PCS or
AC100~240V DC9V/0.5A(9mm).
Battery life: 10 hours.
Operating temperature & humidity:
-20°C to +50°C, <80 %RH.
Storage temperature & humidity :
-10°C to +50°C, <70 %RH.
Data output: USB PC serial interface. (TM-4003)
Display: 60mm(W) x 47mm(L) monochrome
LCD and backlight.

TM-4001/4002/4003
5
Standard accessories:
UM-4(AAA)1.5V battery×6 PCS,
User’s manual, USB cable.(TM-4003),
AC100~240V DC9V/0.5A.(9mm)×1(TM-4003),
Install CD disk (TM-4003).
EMC: This test was designed in accordance with
EMC standards in force and its
compatibility has been tested in
accordance with EN61326-1 (2006).
WARNING
To ensure that the accuracy of the
meter, we recommend for calibration
once a year.

TM-4001/4002/4003
6
4. INSTRUMENT DESCRIPTION
1. HOLD Button 12. Enter Button
2. Power Button 13. DC power
3. MAX/MIN Button 14. USB
4. Left/read Button 15. Probe Jack
5. Mode Button 16. Holder
6. Display 17. Battery holder
7. Backlight Button 18. Battery cover
8. Unit Button 19. Hot-wire sensor
9. Up Button 20. Humidity sensor
10. Right/record
Button
21. Temperature
sensor
11. Down Button

TM-4001/4002/4003
7
5. LCD DESCRIPTION
First window: Air velocity display
zSET : Setting mode indication.
zREC : Record mode indication.
zHOLD : Data hold indication.
zMAX : Maximum measured display indication.
zMIN : Minimum measured display indication.
zAVG : Average measured display indication.
z[] : Low battery indication.
z[ ] : Auto power off indication.
zm/s: Meters per second.
zKnots : knots.
zkm/hr : Kilometers per hour.
zmile/hr : Miles per hour.
zft/min : Feet per minute.
zBeau for : Beaufort.

TM-4001/4002/4003
8
Second window: Temperature, humidity, air velocity
and Absolute pressure display.
zWET: Wet bulb temperature indication.
zDEW: Dew point temperature indication.
z%RH: humidity indication.
z℃: Degree Celsius.
z℉: Degree Fahrenheit.
zhPa: Hectopascal indication.
zinHg: Inch of mercury.
zmmHg: Millimeter of mercury.
zCFM: Cubic feet per minute.
zCMM: Cubic meters per minute.
z2/3V MAX : 2/3V Maximum mode is selected
indication.
z×10: Multiply reading by ten
z×100: Multiply reading by hundred.
z×1000: Multiply reading by thousand.
Third window: Air flow setting and record display
Sample: Sampling indication.
INTV: Sample interval indication.
Area: Duct area indication.
TC: Average time constant indication.
AVG: Average mode is selected indication.

TM-4001/4002/4003
9
K: Number of records by one thousand.
[ ]: Round duct diameter dimension indication.
[ ]: Rectangle duct XY dimension
indication.
h: Hour indication.
m: Minute indication.
S: Second indication.
in: Inches indication.
cm: Centimeter indication.
ft2: Square feet indication.
m
2: Square meters indication.

TM-4001/4002/4003
10
6. POWER ON/OFF
Press button to turn on or turn off the power.
7. Auto power off
The duration of auto power off time is 15 minutes.
If you want disable auto power off, please hold
button and press button at the power
shutdown mode. When you see the “n-SL” display
on the LCD, that means the auto power off function
is off. If you want enable auto power off, please
restart the meter.
8. BACKLIGHT
Press button to turn on the backlight, pres this
button again to turn it off.
The backlight time is 15 seconds.
9. CHANGE AIR VELOCITY UNIT
Press button to change the air velocity unit.
m/s→knots→km/hr→mile/hr→ft/min→Beaufort

TM-4001/4002/4003
11
10. CHANGE UNIT
Press button and button to change
unit.
℃＜＝＞℉, m＜＝＞ft
11. CHANGE FUNCTION
Press button and button to change
function.
Temperature→Humidity(TM-4002、TM-4003)→Dew
point temperature(TM-4002、TM-4003)→Wet blub
temperature(TM-4002、TM-4003)→Air flow→2/3
max air flow →Absolute pressure (TM-4003)
12. TIME CONSTANT SETTING MODE
Press button to select TC and press
button to into the time constant setting mode and
press to exit the time constant setting mode.
Time constant setting mode operation:
1. Press to into time constant setting mode.
2. In the setting the time constant setting mode that
can press , , , button to change
the digit and press to confirm.

TM-4001/4002/4003
12
13. AIR FLOW SETTING MODE
Press button to select Area and press
button to into the air flow setting mode and press
to exit the air flow setting mode.
Air flow setting mode operation:
1. Press button or button to selected
Area or the area of a circle, square area, and
press button to into setting the size of
area.
2. In the setting the size of area that can press
, , , button to change the digit
and press to confirm.
14. DATA HOLD
Press button to enable or disable hold
function.
※The HOLD function will be unavailable if
calibration function is enabled.
15. SINGLE DATA RECORD
Press button to record the current measured
result.

TM-4001/4002/4003
13
16. VIEWING OR CLEARING DATA
RECORDS
Press button to read the data records and
press or wait 15 second to exit.
Press button for more than 2 seconds to
clear the data records.
※The Viewing or cleared Data Records function
will be unavailable if calibration, MAX/MIN,
HOLD function is enabled.
17. MAX/MIN/AVG
Press button simultaneously lockup data
maximum and minimum and average value of
measuring data.
Press button for more than 2 seconds to
disable this feature.

TM-4001/4002/4003
14
18. PRECAUTIONS
zKeep the meter away from electromagnetic
interference (EMI) which may cause erratic
readings.
zPlease turn off the meter to avoid the sensor
burned when you have finished testing the high
wind speed (more than 20m/s) and remove the
probe.
zTo extend the probe, hold the handle in one
hand while pulling on the probe tip with the other
hand. Do not hold the cable while extending the
probe.
zRemove the sensor protective cover, make sure
the sensor window is fully exposed and the
orientation is facing direction of air (wind) flow.
Air Source

TM-4001/4002/4003
15
zTo retract the probe, hold the handle in one hand
while pushing on the probe tip with the other
hand. If the probe antenna binding, please
gently straightened probe, and then the rest of
the extension of section pressure back and don’t
pull the cable.
19. SOFTWARE INSTALLATION(TM-4003)
Please refer to the TM-4003 installation CD
execution.
20. COMPUTER GRADE
zCPU：Pentium Ⅲ1000MHZ.
zRAM：SDRAM 256MB.
zHard disk：200MB.
zOS：Windows 2000，Windows XP.
zDisplay : 800×600 256 color.

TM-4001/4002/4003
16
21. EXTERNAL DC POWER
External AC to DC adapter: Voltage 9VDC.
Socket: Pin positive, Ground casing negative.
External diameter 5.5mm internal diameter 2.1mm
22. SAFETY AND MAINTENANCE
STANDARDS
•Do not put this device in direct sunlight or where
it is hot and/or damp.
•Operating altitude: below 2,000m.

TM-4001/4002/4003
17
23. BATTERY REPLACEMENT
Turn off the power and unplug all cables, remove
the battery and replace into the new battery.
Please use the correct specification of the battery
and correctly installed in the battery holder.
24. END OF LIFE
Caution: This symbol indicates
that equipment and its
accessories shall be subject to a
separate collection and correct
disposal.
WARNING
If the LCD displays” ”symbol, please
replace the battery immediately.
WARNING
If not using the meter, please remove the
battery to avoid possible damage.

TM-4001/4002/4003
18

TENMARS ELECTRONICS CO., LTD
6F, 586, RUI GUANG ROAD, NEIHU,
TAIPEI 114, TAIWAN.
E-mail: [email protected]
http://www.tenmars.com
Professional Electrical and
Environment Test & Measurement
Instruments:
Battery Capacity / Impedance Tester, TACHO
Meter ,LED light meter, Temperature & Humidity
meter ,Infrared Thermometer, Sound level
meter ,Light meter, EMF meter, UV Light meter,
RF meter, Hot wire Anemometer, CO meter
Anemometer, Lan cable tester, CO2meter,
Solar power meter, Radiation meter,
Clamp meter, Multimeter, Phase Rotation test,
Digital Insulation tester
Our products of high quality are selling
well all over the world