TERMA AVIOR User manual

USER GUIDE
V.0.2.R2

USER GUIDE
V.0.2.R2
AVIOR
USER GUIDE
V.0.2.R2

USER GUIDE
V.0.2.R2

USER GUIDE
V.0.2.R2
Table of contents
1. Introduction 3
2. Explanation of symbols 4
3. Description of the device structure 5
4. Device setup 7
5. Warnings 14
6. Contraindications and recommendations 15
7. Warranty 17
8. Incident application form 19

USER GUIDE
V.0.2.R2
1. INTRODUCTION
Wishing you satisfaction of AVIOR usage, we thank you for your choice.
AVIOR device is a response for the patients who are suffering from crurotalar and knee joint disfunctions Due to
its adaptavity it enables to perform independent movements: flexion, extension, abduction, adduction and
multidimensional movement of the foot and also flexion and extension of the knee. Construction of AVIOR device
enables the complex crurotalar and knee joint rehabilitation based on self-assisted, active and resistance
exercises.
This manual provides all the needed information concerning AVIOR device proper functioning.
The manufacturer is entitled to change the content of the manual when it’s needed. The updated version of the
manual will be available to download from the manufacturer's website www.termamed.pl from the "Downloads"
section.
Manufacturer:
Terma Sp. z o.o.
80-298 Gdansk
Czaple 100
Poland
T: [phone]
F: [phone]
email: [email protected]
www.termamed.pl

USER GUIDE
V.0.2.R2
2. EXPLANATIONS OF SYMBOLS
It is mandatory to read the safety statements before using the device. The safety statements are classified as
follows:
Safety warnings and essential usage details.
Safety of exploitation warnings. Unless followed, may result in minor personal injury and/or
product/property damage.
Mark of the active part of the device described on the illustrated scheme and explained in
table.

USER GUIDE
V.0.2.R2
3. DESCTIPTION OF THE DEVICE STRUCTURE
Versatility of AVIOR possible settings enables to perform the therapy of various disfunctions of crurotalar joint.
The structure of the device is explained on the model below.
6
3
5
2
1
8
10
12
9
11
4
7

USER GUIDE
V.0.2.R2
The list of components:
1
Lever
Adaptive element that enables to perform self-assisted exercised of the
crurotalar and knee joint.
2
External frame
Base element enabling to attach other components.
3
Clamp lever 1,2,3
Clamp elements enabling to define the position of the shin stabilization (6).
4
Foot platform
Foot positioning element.
5
Transport handle
Handle that enables safe and comfortable transportation of the device info
needed room.
6
Mounting pin
Adaptive element which installed in the lever (1) or external frame (2)
enables to perform exercises of the knee joint. When the mointing pin is
removed, exercises of the crurotalar joint can be performed.
7
Main frame
Base element that enables to attach other components.
8
Shin stabilization
Shin stabilisation positioning element.
9
Abduction and adduction
knob
Clamps defining the position of the foot platform against the saggital axis of
the device.
10
Reciprocating movement
lock
Clamps defining the position of the foot platform against the rail.
11
Wheel
Element that enables safe and comfortable transportation of the device info
needed room.
12
Adjustable mounting
element
Positioning element with possibility to adjust the height of the shin
stabilization in the structure of the device. This element is compatible with
the shin stabilization (8).
13
Expanders
Weight defining elements enabling to perform resistance exercises (not
mentioned on the model).

USER GUIDE
V.0.2.R2
4. Device set up
The device reaches the Customer folded. It needs to attach the lever (1) to the main frame (6) using the knob V.1
(2) which is described on the page 5.
Visualizations below advice how to perform a chosen technique of rehabilitation.
4.1. Flexion and extension of the knee:
Abduction and adduction knob locked (9),
Reciprocating movement knob (10) unocked,
Mounting pins (6) installed,
Shin stabilization (8) removed.

USER GUIDE
V.0.2.R2
4.2. Flexion and extension of the crurotalar joint:
Abduction and adduction knob (9) locked,
Reciprocating movement knob (10) locked,
Mounting pins (6) off,
Shin stabilization (8) installed (clamp levers (3) closed).