Tesco OFR1K10 User manual

OFR1K10 1000W Oil Filled Radiator User Manual OFR1K10 1000W Oil Filled Radiator User Manual OFR1K10 1000W Oil Filled Radiator User Manual
SAFETY GUIDE - PLEASE READ CAREFULLY
Please follow all the safety precautions listed•
below for safety and to reduce the risk of
injury or electrical shock.
Read all the instructions carefully before•
using this appliance and keep them for future
reference.
Retain the manual. If you pass the product•
on to a third party, make sure to include this
manual.
Unplug the appliance from the mains supply•
when not in use, or before cleaning any part
of the appliance.
This appliance is for household use only.•
Do not use outdoors or in damp or wet•
conditions.
Do not immerse the appliance or the electrical•
cord or plug in liquids.
Do not use the appliance near a re, oven or•
other source of heat.
Place the appliance on a stable and at•
surface where there is no risk of it tipping over
or being knocked over.
Ensure that there is enough space for the•
heater while operating. There should be at
least 20 cm clearance around the heater and
1 m above the heater.
DO NOT place the appliance immediately•
below an electrical socket or other appliance.
Do not use the heater in front of or close to an•
open window. Rain may create an electrical
hazard.
Keep ammable and explosive objects away•
from the heater.
DO NOT hang the appliance on a wall,•
furniture, etc.
DO NOT use the heater in the immediate•
surroundings of a bath, a shower or a
swimming pool.
DO NOT place the appliance close to children•
or pets. Never let children operate this
appliance. Close supervision is necessary
when this appliance is used near children.
This appliance is not intended for use by•
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure•
that they do not play with the appliance.
When unplugging the power cord, hold the•
plug top, not the power cord.
Store the appliance away from direct•
sunlight and out of the reach of children.
Do not cover the heater or use it to dry•
laundry or towels.
Never insert any objects into the spaces•
between the heater bars.
Do not place soft objects or fabrics over or•
in close proximity to the heater or otherwise
obstruct the inlet or outlet.
There are no user serviceable parts in your•
appliance. Unauthorised dismantling or
servicing will void the product warranty.
Do not operate the appliance with a•
damaged cord or plug or after the appliance
or any component has been damaged.
Send the heater to a suitably qualied or
appointed service agent for inspection and
repair.
Do not use the appliance for any purpose•
not expressly specied in this manual.
THIS APPLIANCE MUST BE ATTENDED AT ALL•
TIMES WHEN IT IS SWITCHED ON
SPECIAL INSTRUCTIONS
This heater is lled with a precise quantity of
special oil.
Repairs requiring opening of the oil container
are only to be made by the manufacturer or
an appointed service agent who should be
contacted if there is an oil leak.
Regulations concerning the disposal of oil when
scrapping the appliance have to be followed.
PREPARATIONS FOR USE
Remove all exterior packaging from the heater.
If you dispose of any packaging please do so
according to any recycling regulations.
FITTING THE CASTERS
The casters are mounted on a plate, each with a
xing kit of a U-bolt and a wing nut.
CAUTION: It is essential that the casters
are tted before using the heater to
ensure that the appliance is stable and
that adequate clearance is available for
air to ow over the radiator bars.
Prepare a work surface by placing a blanket or1.
similar protection on a table at a convenient
working height.
Lay the radiator on its side so that the base of2.
the radiator hangs over the table end.
Slide the U-bolt through the slot between the3.
end two radiator bars. Position the hooked
end as shown below, ready to engage in the
hole in the caster plate.
CONTROLS AND FEATURES
Handle1.
Temperature control2.
Power selector switches3.
Mains lead storage4.
Mains lead5.
Radiator heated bars6.
Casters7.
Engage the hooked end of the U-bolt through4.
the caster plate.
Rotate the U-bolt so that the threaded end5.
passes through the other hole in the caster
plate.
Lock the caster plate to the radiator with a6.
wing nut.
c
d
e
f
g
Fit the second caster plate in the same way.7.
Your heater is now ready to use. Carefully lift the
heater down to stand on the casters.
Caster plate x 2
U-bolt x 2
Wing nut x 2
CASTER FIXINGS
TILT SWITCH
This appliance includes a tilt switch as a safety
feature. If the appliance is not placed on a at,
level surface, the tilt switch will switch o the
appliance.
ELECTRICAL INFORMATION
Before using this appliance ensure that the voltage
of your electricity supply is the same as that
indicated on the rating plate of the appliance.

OFR1K10 1000W Oil Filled Radiator User Manual OFR1K10 1000W Oil Filled Radiator User Manual
OFR1K10
User manual
1000W Oil Filled Radiator
CAUTION: Do not touch the main body
of the heater when operating - danger
of burns.
CAUTION: Never hold the heater body
when moving the heater. Always
disconnect the heater before moving
and hold the handle at the top of the
control panel when moving it.
AFTER USE
Turn the power selector switches to the ‘0’1.
(o) position. Disconnect the plug from the
mains.
When the heater has cooled you can coil the2.
mains lead around the mains lead storage
reel, pressing the plug into the end of the reel.
Ensure that the lead is coiled loosely with no
kinks, particularly where it exits from under
the reel.
CAUTION: Never use the heater with any
part of the mains lead wound around
the reel. The mains lead must always be
fully unwound when operational.
Allow the heater to cool fully before moving it3.
to a safe place, away from children and pets.
WARRANTY
Your appliance is covered by a warranty for 12
months from the date of purchase. If a fault
develops during this period, please return the
unit to your nearest Tesco store together with the
original receipt as proof of purchase.This warranty
in no way aects your consumer rights
UK: Waste electrical products /batteries
should not be disposed of with household
waste. Separate disposal facilities exist,
for your nearest facilities.
See www.recycle-more.co.uk or in-store
for details.
ROI: Produced after 13th August 2005.
Waste electrical products/batteries
should not be disposed of with household
waste. Please recycle where facilities
exist. Check with your Local Authority or
retailer for recycling advice.
OPERATION & CONTROLS
Position the heater in the room, ensuring1.
there is at least 20cm clearance around the
heater and 1 m above it. Check that the airow
through the radiator bars is unobstructed.
Set the power selector switches to the ‘0’ (o )2.
position.
Unwind the mains lead fully, connect the3.
mains plug to a mains outlet and switch on
the power at the outlet.
Switch on the power selector switches to the4.
low, medium or high power setting. Use the
low power setting for smaller rooms. Use the
medium or high power setting if the room is
larger or if the temperature in the room is very
cold.
For low power (400 W), press switch I to•
the I ‘on’ position.
For medium power (600 W), press switch•
II to the II ‘on’position.
For high power (1000 W), press both•
switches to the III‘both on’position.
The indicators on the switches will light to
show which switches have been pressed.
Turn the temperature control clockwise to the5.
maximum position (Max).
The power indicators on the switches you selected
will light and the heater will begin to warm the
room.
When you feel the room temperature is6.
comfortable, turn the temperature control
anti-clockwise slowly until the power
indicator(s) extinguish.
The thermostat will now switch the heater on and
o to keep the room at this temperature. The light(s)
in the switches will switch o when the thermostat
reaches the temperature you set.
CARE AND MAINTENANCE
Ensure that the appliance has cooled completely
and is disconnected from the mains before
cleaning it.
Use a barely damp cloth to clean the surface of
the appliance. Ensure that no liquids penetrate
the heater casing.
Donotuse abrasivechemicals,steel wool.scouring
or abrasive pads on any part of the heater.
Dry thoroughly before re-use or storage.
SPECIFICATIONS
Model:................................ OFR1K10
Voltage: ............................. 220 - 240 V~, 50 Hz
Power consumption:.... 900 - 1100 W
Net Weight:...................... 5.4 kg
IMPORTANT: THIS APPLIANCE MUST BE
EARTHED.
Tesco Stores Ltd
Delamare Road, Cheshunt, Herts, EN8 9SL
OFR1K10 V0.3