TESmart PKS0201A10 User manual

English
User
Manual EDID PKS0201A10 & PKS0401A10
2x1 DisplayPort KVM Switch
4x1 DisplayPort KVM Switch
PKS0201A10 & PKS0401A10

English

Preface
It’s our great honor that you have chosen the DisplayPort KVM Switch produced by our company, Tesla Elec
Technology Co.,Ltd. In this user manual, you will learn how to operate and use this product. Please read this user
manual comprehensively before use. If you have any questions, comments or suggestions, please contact us via
the following email:
[e-mail].
Copyright Notice
The user manual, compiled by Tesla Elec Technology Co.,Ltd, shall not be duplicated or translated by any person or
organizations without written permission. This user manual shall not be used for commodity transaction in any
form or by any means (electronically, mechanically, photocopying or recording, etc.) or be used for any business
practices or profitable activities. The ownership of the trade names and brand names adopted in this user manual
belongs to their companies.
Address of Manufacture
Tesla Elec Technology Co.,Ltd 2F,
Building C, Xingzhisheng Industrial Park, No.12,
Xiawei Industrial Zone, Zhangkengjing Road,
Guanlan Street,
Longhua District, Shenzhen City,
Guangdong Province, China

Contents
1. Safety Tips and Warnings··································01
2. Battery Description···········································02
3. Warranty Information········································03
4. Preface··························································04
5. Features·························································05
6. Packing List·····················································06
7. Panel Description·············································07
7.1 2X1 Panel Description
7.2 4X1 Panel Description
8. Connection Description·····································09
8.1 Connection Diagram
8.2 Connection Preparation
8.3 Connection Steps
8.4 KVM Workbench
9. Function Description········································19
8.1 EDID Emulator
8.2 Auto scan mode
8.3 Mouse Wheel Switching
10. Switching Method············································21
10.1 Front Panel Button
10.2 IR Remote Control
10.3 Keyboard Hot Keys
10.4 Mouse Gesture Mode
11. Change Hot Key Combinations···························27
12. Pass Through Mode Description·························28
12.1 Introduction of Pass Through Mode
12.2 Keyboard and Mouse Compatible Model List

1. Safety Tips and Warnings
Tips: Please read the safety tips and warnings for DP KVM Switch comprehensively before use. Use this
produce in accordance with its instructions, safety tips and warnings to prevent unnecessary
damage to the product and potential dangers to users.
Keep the product away from water.
Do not expose this product and its battery to open fire or overheating environment. Dispose the waste
battery in accordance with instructions.
Unplug the power supply of this product in thunderstorm days or when it has been not used for a long
time.
Do not touch the product and the power cord with wet hands so as to lower the risk of electric shock
and damage to the product. Do not let the product get wet or become damp.
Keep the product away from ignition sources, such as heat sinks, heat accumulators, stovepipes and
other heat production settings (including audio amplifiers).
Use the product in accordance with its instructions and do not block its vents.
Users shall not remove and repair the product without authorization.
Clean the product with dry cloth.
ZH
01
EN
1. Safety Tips and Warnings

2. Battery Description
Caution: Improper disposal of the lithium battery may
cause an explosion. Do not throw the
battery into fire. Keep the battery away from
children. Dispose the waste battery in
accordance with local regulations.
Tips: By default, the remote control is not equipped
with batteries, due to the safety requirements of
some express companies. Install AAA dry cells
before use.
open
2. Battery Description
02
EN

We warrant that this product will be free of defects in material and workmanship for a period of
one (1) year from the date of shipment. If within the period of warranty this product proves
defective under normal use, we will repair or replace this product, provided that the product has
not been subjected to mechanical and electrical damage, or other abuse or modifications. If it
fails under conditions other than those covered, its repair will be charged in accordance with
the current price of parts and labor in effect at the time of repair. Such repairs are warranted for
six (6) months from the day of reshipment to the buyer.
3. Warranty Information
ZH
03
EN
3. Warranty Information

Dear Users,
DP KVM Switch can greatly facilitate your management of audio-video equipment and video
devices. 2x1/4x1 DP KVM Switch can easily integrate cross-platform computer devices. Thus,
you can easily control 2~4 computer devices with only 1 DisplayPort display. This switch
supports using USB hubs and USB keyboard and mouse. You can connect printer, USB drive,
bar code scanner or other USB 2.0 devices to this KVM. This product also supports several
other switching modes. You can switch input ports with front panel button, IR signals and
keyboard hot keys. At the same time, with EDID emulators in each input port, it can keep PCs
always having correct display information.
4. Preface
Tips: If you need to control more computers or conduct more complex and professional switching, you
can also choose other products of our company. For more details, please visit our official website:
www.tesmart.com.
4. Preface
04
EN

5. Features
ŸControl 2~4 computers with only 1 set of keyboard, mouse and monitor
ŸSupport resolution up to 3840x2160@60Hz 10bit 4:4:4
ŸSupport Unix/Windows/Debian/Ubuntu/Fedora/MacOS X/Raspbian/Ubuntu for
Raspberry Pi and other Linux based systems
ŸAvailable to use keyboard and mouse without any delay after switching input ports
ŸSupport keyboard and mouse pass through mode to improve KM compatibility
ŸWith USB 2.0 hub port, it is possible to connect bar code scanner, USB drive or other USB
devices
ŸWith EDID emulators in each input port, it can keep PCs always having correct display
information
ŸSupport IR signals, front panel button, keyboard hot keys mouse wheel and mouse gesture
to control KVM to switch input ports
ŸSupport hot-plug and the devices connected to the KVM can be added or removed at any
time without turning off the computers
ŸSupport HDR 10 and Dolby Vision
ZH
05
EN
5. Features

6. Packing List
Tips: After receipt of the product, please check the packing list carefully to make sure that no components have
been lost and no damage to the product has been caused during transportation. If you have any
problems, please contact us at any time.
Ÿ1 * 2x1/4x1 DisplayPort KVM Switch
Ÿ1 * IR Remote Control
Ÿ1 * DC 5V Power Adapter
Ÿ1 * User Manual
Ÿ2/4 * DP Cables (Depends on the KVM input ports number)
Ÿ2/4 * USB Type-A to Type-B Cables (Depends on the KVM input ports number)
6. Packing List
06
EN

7. Panel Description
125
34
ZH
07
EN
7. Panel Description
7.1 2X1 Panel Description
ID
Name
Function
1
Power switch
Turn on or turn off power supply.
2
USB connection status
indicators
LEDs will be lit (blue) if the KVM's USB ports are connected to the computers' USB
ports.
3
Input selection status
indicators
The corresponding LEDs will be lit (blue) to indicate the current selected PC.
4
Input selection button
Select input sources.
5
IR receiver
Receive IR remote signal.

ID
Name
Function
6
DC 5V
5V DC power supply.
7
DisplayPort output port
Connect to DisplayPort display for video output.
8
Standard USB 2.0 port
Connect to USB 2.0 device.
9
Keyboard and mouse
input
For USB keyboard and mouse input.
10
KVM Input port groups
Each group contains a DisplayPort (left) and an USB port (right). Connect
the ports to corresponding input devices for signal input.
11
EDID emulator switch
Enable or disable EDID emulator.
7. Panel Description
08
EN
678910 11

ZH
09
EN
7. Panel Description
7.2 4X1 Panel Description
ID
Name
Function
1
IR receiver
Receive IR remote signal.
2
Input selection button
Select input sources.
3
Input selection status
indicators
The corresponding LEDs will be lit (blue) to indicate the current selected PC.
4
USB connection status
indicators
LEDs will be lit (blue) if the KVM's USB ports are connected to the computers' USB
ports.
5
Power switch
Turn on or turn off power supply.
12345

7. Panel Description
10
EN
ID
Name
Function
6
DC 5V
5V DC power supply.
7
DisplayPort output port
Connect to DisplayPort display for video output.
8
Standard USB 2.0 port
Connect to USB 2.0 device.
9
Keyboard and mouse
input
For USB keyboard and mouse input.
10
KVM Input port groups
Each group contains a DisplayPort (left) and an USB port (right). Connect
the ports to corresponding input devices for signal input.
11
EDID emulator switch
Enable or disable EDID emulator.
EDID
678910 11

8.1 2X1 Connection Diagram
8. Connection Description
ZH
11
EN
8. Connection Description
Barcode
Scanner USB Driver Printer Keyboard Mouse
DP Cable USB Cable
PC 2
Tips: Please refer to Chapter 9.1 for the detailed information about EDID emulator.
PC 1
DP Cable
Monitor

4X1 Connection Diagram
EDID
Barcode
Scanner USB Driver Printer Keyboard Mouse
DP Cable USB Cable
PC 4
DP Cable
Monitor
Tips: Please refer to Chapter 9.1 for the detailed information about EDID emulator.
PC 3 PC 2 PC 1
8. Connection Description
12
EN

8.2 Connection Preparation
ŸTake into consideration all devices required to be connected and prepare a workbench
large enough before the connection.
ŸLay out the cables properly to facilitate the layout of power supply as a lot of power
sockets and plug boards will be adopted in connection.
ŸPrepare different sticker labels to mark cables as a lot of cables will be adopted in
connections.
（ D P Cable + U S B Type A to B Cable）
DP DP USB Type-BUSB Type-A
USB Type-C
ZH
13
EN
8. Connection Description

8.3 Connection Steps
1. Connect PC1 with 1 DP cable and 1 USB Type-A to Type-B cable, use DP end to connect PC1
to the DP port on the KVM, use USB Type-A end to connect PC1 and Type-B end to connect
the KVM (As shown below, take 4X1 DP KVM as the example).
2. Connect PC 2 in the same way as shown above (2X1 DP KVM).
Connect PC 2~4 in the same way as shown above (4X1 DP KVM).
8. Connection Description
14
EN

4. Connect an USB 2.0 device to KVM's standard USB 2.0 port.
3. Connect external mouse and keyboard to KVM's keyboard and mouse input port.
Tips: For normal use of hotkeys, we recommend
you use the full-key external keyboard with a
separate [Scroll Lock] key (as shown above).
ZH
15
EN
8. Connection Description