TESmart PKS0201A10 User manual

USER MANUAL
ENJOY THE VIVID WORLD
DP KVM Switch

1
KVMDP
Features :
Packing List :
1 * 2X1/4X1 DP KVM Switch
1 * DC 5V Power adapter
1 * IR Remote control
1 * User manual
Using only 1 set of keyboard, mouse and monitor to control 2/4
PCs
Support resolution up to 3840*2160@60Hz
Support hot plug, connect or disconnect devices to the KVM
at any time without turning off devices
Support auto switching to monitor computers in a specified
time interval
Support front panel button, keyboard hot keys, mouse gesture
or IR remote control to control KVM to switch inputs
Available to use keyboard and mouse without any delay after
switching input sources
With extra standard USB port, it is possible to connect
barcode scanner, USB hard drive or other USB devices to
KVM
Support mouse and keyboard pass through mode to improve
mouse and keyboard compatibility

2
KVMDP
ID
Name
Description
1
DC 5V
5V DC power supply
2
Display port output
Connect to Display port display
3
Standard USB 2.0
port
Connect to USB 2.0 devices, printers,
USB drives
4
Keyboard and
mouse input
Connect to keyboard and mouse
5
Display port input
Connect to Diaplay port source devices
6
USB data ports
Connect to USB ports of PC
7
Power switch
Turn on or turn off power supply
2x1 Panel Description :
1
11
10987
65
234
12

3
KVMDP
ID
Name
Description
8
USB connection status
LEDs will be lit if the USB Type B
ports are connected to computers,
and computers are on
9
Input selection status
Indicate current selected input source
10
Input selection button
Select input source
11
IR receiver
Receive IR remote signal
12
Mouse and keyboard
pass through mode
status
LED on: Working under pass through
mode
LED off: Working under emulated
mode
2x1 Panel Description :

4
KVMDP
Monitor
PC 2 PC 1
USB driver
Barcode
scanner Printer
Keyboard Mouse
Note: The keyboard hot key is available only when the keyboard is connected
to this dedicated port.
2x1 Connection Diagram :
DP cable DP cable USB Type-A to
Type-B cable

5
KVMDP
4x1 Panel Description :
ID
Name
Description
1
DC 5V
5V DC power supply
2
Display port output
Connect to Display port display
3
Standard USB 2.0
port
Connect to USB 2.0 devices, printers,
USB drives
4
Keyboard and
mouse input
Connect to keyboard and mouse
5
Display port input
Connect to Diaplay port source devices
6
USB data ports
Connect to USB ports of PC
1
11
10987
65
234
12 13

6
KVMDP
4x1 Panel Description :
ID
Name
Description
7
Mouse sensitivity
adjustment button and
indicator
Press the button to adjust the
sensitivity of mouse movement
recongnition
8
Mouse and keyboard
pass through mode
status
LED on: Working under pass through
mode
LED off: Working under emulated
mode
9
IR receiver
Receive IR remote signal
10
Input selection button
Select input source
11
Input selection status
Indicate current selected input source
12
USB connection status
LEDs will be lit if the USB Type B
ports connect to computers, and
computers are on
13
Power switch
Turn on or turn off power supply

7
KVMDP
4x1 Connection Diagram :
Monitor
PC 2 PC 1PC 3PC 4
USB driver
Barcode
scanner Printer
Keyboard Mouse
DP cable DP cable USB Type-A to
Type-B cable
Note: The keyboard hot key is available only when the keyboard is connected
to this dedicated port.

8
KVMDP
Select next input port
Select port by port number
4
Note: 3, 4 are for 4x1 KVM.
HOW TO USE KEYBOARD HOT KEYS:
1. Hit [Scroll Lock] key twice within 2 seconds, the buzzer will beep
once when [Scroll Lock] is pressed the second time .
2. After step 1 enter following hot key commands within 3 seconds,
the KVM will execute the corresponding commands.
HOW TO USE :
1.Setup the connection according to the connection diagram.
2.After all the PCs are started in step 1, then you can switch to any
PC by keyboard hot keys, IR keys or the key pad on the KVM
front panel. (For example, if you want to control the PC connected
to HDMI Input 2 just press the [Select] button on front panel, or
press digit button [2] on remote control, or the keyboard hotkey
commands described following)
Select previous input port

9
KVMDP
F11 Enable or disable buzzer sound
F12
Enable or disable fast
switching mode (Mouse
gesture mode)
If fast switching mode is activated, then double hit left or right bound of the
screen with mouse pointer in 1 second, KVM will switch to previous or next
input.
Turn on auto switching mode
Note: The KVM will automatically loop among all the powered on input source
within a specified time interval. Default auto switching time interval is 6 seconds,
you are able to change this value by following hot key commands:
Increase or decrease auto
switching time interval
Note:1 second per step, the time is up to 250 seconds.
Turn off auto switching mode
Esc
Note: Execute this hotkey command to exit auto switching mode.
F2
+ + Turn on/off keyboard and
mouse pass through mode

KVMDP
F1
+ +
Right
-Ctrl
Right
-Ctrl
Switch the control hotkey
to [Scroll Lock]
The same if you want to change the hotkey from [Right-Ctrl] to
[Scroll Lock], you could do as follows:
1.Press front panel button [Select] until the buzzer is beeping, then
restart the KVM.
2. Execute hotkey command: [Right-Ctrl]+[Right-Ctrl]+[F1] ,
then restart the KVM.
F1
+ + Switch the control hotkey
to [Right-Ctrl]
After you had done either one of above, the hotkey combinations would be
changed to: [Right-Ctrl]+[Right-Ctrl]+[xxx].
Note: xxx refers to keyboard key PageUp, PageDown, 1~4, F11, F12,
SPACE, +/-.
If no [Scroll Lock] key on your keyboard or the [Scroll Lock] key is
used for other functionality, you can take [Right-Ctrl] hotkey instead
of [Scroll Lock] key by below two ways:
1. Press front panel button [Select] until you hear the buzzer is
beeping, then restart the KVM.
2. Execute hotkey command [Scroll Lock]+[Scroll Lock]+[F1] , then
restart the KVM.
Note: For the best compatiblity, it is better to turn on keyboard and
mouse pass through mode. In this mode, the keyboard and mouse
are dynamically mapped to computer, so you are able to use
special keyboard and mouse that with multimedia keys or other
customized keys.
HOW TO CHANGE THE HOT KEYS COMBINATION:
10

KVMDP
11
IR Remote Control:
M P
1 2
34
Remote Control
Note: 1.For the safety request by some express company, the remote control
is not equipped battery by default. Please install the button battery
CR2025 before using it.
2. Unspecified buttons at above are non-functional.
2Switch to input port 2
1Switch to input port 1
3Switch to input port 3
4Switch to input port 4
Note: 3,4 are only available for 4x1 HDMI KVM switch.

KVMDP
Mouse
Model
Keyboard
Model
Zklli
ZM500-5
ME TOO
Z5
FL.SPORTS
G12
Dareu
CK535
Newmen
GX1-KEPLER
Aigo
8362
Aigo
WQ-641
AJAZZ
AK35I
LDK.al
Colourful X800
Acer
KB21-2X
Note: The above list is part of the verified keyboards and mouses
list with special HID protocol.
Verified keyboards and mouses:
12

Warranty Information :
31.00.0210-V004