Texecom Veritas Medusa User manual

Instruction Manual
Veritas Medusa
Texecon1
Designed to Perform
Regulatory information
Supplier: Texecom Ltd, St. Crispin Way, Haslingden, Lancashire, 884
4PW, UK.
Weoe Directive: 2002/96/EC {WEEE directive): Products marked with
)t
this symbol cannot be disposed of as unsorted municipal waste
in the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new
-equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
RoHs Directive: 2002/95/EC RoHS Compliant. Hereby, Texecom
declares that this device does not contain lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBS) or polybrominated
depheny ethers (PBDE)
in more than the percentage specified by EU
directive 2002/95/EC, except exemptions stated in EU
directive 2002/95/EC annex.
CE Directive: 2004/108/EC (CE directive): Hereby, Texecom declares that
(
this device is in compliance with the essential requirements
and other relevant provisions of Directive 2004/108/EC.
Maintenance:
Test yearly by the installer
Warranty:
10 year replacement warranty
Security grade:
EN Grade 2 Environmental class: Class IJ
Standards: EN50131-2-2, ?06662:2010
Disclaimer: The
Veritas Medusa is not a complete alarm system, but only
its part. Therefore Texecom does not accept any responsibility or liability
for
any damage that is claimed to be a result of an incorrect functioning
of
the Veritas Medusa detector. Texecom reserves the right to change the
specification without a prior notice.
©1994-2012Texecomltd
I. t"M T ::>ILf\L
79mm
(3.0")
2.5mm (0.1 ") ABS
5. DETECTOR WIRING & SET UP
LED OFF
'·
T
90g (3oz) approx.
-35°C (-31°F) to +60°C (+140°F)
I
-20°C (-4°F) to +55°C (+131°F)
111'1
<0
0'
""<
-v.A
-)>g
.:J. l"ML.:JL MLMfUYI r nv I L"- I IVI"t
Design:
RF Immunity:
Noise reduction circuits with maximum
ground plane.
No false alarms from 80MHz to 1 GHz at
50V/m, equivalent to a 700W uniform
transmitter at 3m (10ft).
Complies with BS EN 61000-4-3: 1997.
Electrostatic Discharge: No false alarm up to 8kV.
Complies with BS EN 61000-4-2: 1995.
Fast Transient Immunity: No false alarms up to ± 1 kV.
High Energy Transient
Immunity:
Conducted RF
Susceptibility:
EMC:
Pulse Count:
Complies with BS EN 61000-4-4: 1995.
No false alarm up to ±tkV. Complies wnh
BS EN 61000-4-5 : 1995.
No false alarms at 1 OVrms. Complies with
BS EN 61000-4-6: 1996.
Independently certified to EN 50130-4: 1996.
Adjustable Pulse Count. Internal link to select.
SLOW
A 0.3 · 3.0m/s
1 -1011/s
.,.
./
6. MOUNTING HEIGHT & SETTING:

7. ANGLING THE DETECTOR
1 • \.-.;:1· •
:. .,
..•
13'1·
12. MOUNTING THE DETECTOR
Mount on a stable surface
12m
40'
8. COVERAGE AT 2m
&
6'7.
'ly, ·_ . -
Bm
._,,_ .• '• ,_ -!
(\lr •,rr, .,, __ , .
. l• .,,,_ .•
10m
32'9"
•
13.WIRING
Do not run cable parallel to mains wiring
12m
40'
9. LENS SELECTION
14. CHOOSING A LOCATION
Avoid common false alarm sources
lr'l- ----..\I;/
'/; I \"
I
l1 4:-@
I
10. CHANGING LENSES
11. MOUNTING THE DETECTOR
rC)
For indoor use only
LENS
15. SEAL ALL HOLES
16. MOUNTING WITHOUT BRA
X
.I
Certificate Number: FM 35285 british se